1. The following is the wiring diagram of the Lierda msp430 emulator (two lines):2. Wiring instructions are as follows:
If the target board is not powered during the simulation, the FET will provide p
Event time: From now until August 4th
This year, TI has provided a wide variety of development boards for students participating in the competition. We have also summarized some useful video tutorials
Previous [N32L43X Review] 2. Analog I2C Drive OLED [N32L43X Review] 3. Hardware I2C Drive OLED [N32L43X Review] 4. Analog SPI Drive OLED introduced analog I2C, hardware I2C, and analog SPI to drive OL
There are several approaches to designing low-voltage systems in motor-driven building automation and grid infrastructure applications such as smart meters, smart locks, Internet Protocol (IP) network
Hello everyone, when the LSM6DS3TR-C is configured in the I2C address, when the SA0 pin is connected to GND, there is a 10k pull-down resistor. The power consumption will increase by 0.5mA compared to