-
STM32F103 timer clock not understood
Today I saw a blog post that says: Assuming the system clock is 72Mhz, TIM1 is derived from PCLK2 (72MHz), and TIM2-7 is derived from PCLK1. The key is to set the clock pre-division number and the val
-
Why do clocks use 32.768K crystals?
[i=s]This post was last edited by fish001 on 2019-9-19 21:50[/i]In the electronics industry, the crystal oscillator frequency that customers and suppliers often hear is 32.768KHZ, 77.503KHZ, 60.003KHZ
-
Problems and Solutions in TMS320F206 Simulation Debugging
[size=4]F206 has three independent storage spaces for program, data and I/O, each of which is 64K×16 bits, of which the on-chip dual-access RAM is 544 words (288 words for data, and the other 256 word
-
DCDC input end inrush current problem
I recently used this DCDC circuit. When VIN is powered on, the impact current at the input end will range from a few A to tens of A, and the size varies with the resistance value of R1R2. I soldered t
-
Smart Home Series Articles | Battle for Control: Who is the control center of the smart home system?
By Mike Gilbert, Head of Personal Electronics Systems End Devices, Texas Instruments
With the popularity of smart homes, more and more rooms are now equipped with smart speakers equipped with artifici
- EEWORLD University Hall----Live Replay: MCU programming is no longer difficult, use MPLAB? Code Configurator (MCC) to achieve rapid development
- Understanding of the working principle of single chip microcomputer
- Talk about the basic structure of MSP430 program library
- Why can't the mobile and computer versions be horizontal?
- How to determine the device address of an I2C slave?