RTC is an important real-time clock timer, which can be used to assist in marking the data collection time. In addition, it can also easily realize the production of electronic clocks. Figure 1 shows
In PCB design, after setting the board outline, call the parts (footprint) into the workspace. Then reposition the parts to the correct location and wire them when finished.
Component placement is the
[i=s]This post was last edited by TL-LED on 2022-6-2 14:27[/i]1. Project Background
When testing products, it is often necessary to view the data of the specified ID on the CAN communication. Sometime
The schematic diagram is designed using TI's WEBENCH. When outputting 48V/1A, the temperature of the MOS tube reaches 100°C. Is this temperature too high?
attach://600758.pdf