Implementation of DSPGateway on OMAP Platform-Embedded Development-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

Zigbee Z-Stack 3.0.1 Modify channels using broadcasting
The default channel of TI's zigbee protocol stack is 11. How can I quickly change it to channel 15?The method is to send a broadcast to 0xFFFF to make the change. Call the MT_ZdoMgmtNwkUpdateRequest f
The STM32 FFT library calculates the amplitude normally, but the phase is different each time. Has anyone encountered this problem?
[size=14px]I use an external AD to sample 256 points (SIN wave) of a signal, and then do a 256-point fft operation in stm32 to calculate the amplitude and other parameters of the signal. The amplitude
EEWORLD University----UCD3138 Analog Front End (AFE) Module
UCD3138 Analog Front End (AFE) Module : https://training.eeworld.com.cn/course/4953
"Show goods" to come to a wave of commonly used development boards
Some of these boards were made by myself, some were bought by myself, and most were obtained for free or at a discount through forum activities. This is only a part of it. There is another box that ha
Measurement of the phase difference between a sine wave and a square wave
The module generates a sine wave and a square wave. What instrument can accurately measure the phase difference between them? The oscilloscope is limited by its own starting method, so the measurement
[Sipeed LicheeRV 86 Panel Review] - 6 waft-ui component tests (3)
Hardware System Engineer's Handbook
Integrated operational amplifier practical circuit diagram
For electronic hardware, there are many circuit structures, which can be said to be the units that make up a component. All circuits...
【Ended】Microchip Live｜Wireless Power Consortium (WPC) compliant wireless charging authentication

Trending Downloads

Implementation of DSPGateway on OMAP Platform

Document Introduction