When using C2000, engineers often say that the chip simulation can run, but the stand-alone run cannot run; or when debugging, reset the chiprun, and find that the program cannot run. The main reason
Using timer interrupt to realize variable frequency flashing of LED lightsThe example is relatively simple, and the source code is directly posted.
#include "DSP2833x_Device.h" // DSP2833x Headerfile
Using STM32F103VET6 microcontroller, DAC+DMA+TIM2 trigger mode, channel 1 outputs sine wave, refer to the routine configuration, but there is no signal output, the hardware is checked and it is normal
[i=s]This post was last edited by yjtyjt on 2019-9-17 20:36[/i]Showing off the Jingdong E-card exchanged with E-coins. I liked some of the coins and exchanged them for a 400 yuan E-card on Jingdong. W
[i=s]This post was last edited by elec32156 on 2020-4-19 16:33[/i]The figure shows 74HC165 shift registers, which are connected in series. One is 8 bits, and two can achieve 16-bit data output (ultima