The signal at the signal input IN is a sine wave (which contains more harmonic components). Remember to filter and follow it and then pass through a passive crystal oscillator. The 8M marked on the fi
This book introduces the theory and design methods of switching power supplies while taking into account both practicality and theory. It is a book specially written for researchers and engineers enga
[i=s]This post was last edited by qwqwqw2088 on 2020-9-23 11:19[/i]The gas gauge/fuel gauge is used to measure and display the battery power, usually including the remaining capacity (RM), full charge
In the CH579M system, a timestamp function is provided, which can be used to record the time when the system is compiled. The effect of its use is shown in Figure 1.Figure 1 The effect of using the ti