Bluetooth EDR Test Specification

Recommended ContentMore

Open source project More

• NCV12711PSRGEVB: EVB 12V/1A PSR primary side regulation
• T12 soldering pen v6.1
• 【Hongshun Training Camp】HK32F103VET6 V1.0
• DER-43 - 1.8W non-isolated power supply
• IMU-Board_V1.0
• esp32s2 development board
• 4-channel 16-bit high-precision ADC module
• SM7035 verification board
• DI-25 - 30 W DC-DC converter with synchronous rectification
• EtherCAT communication development platform based on ARM processor-schematic diagram

Searched by Users

• RT809H programmer software_2017 07 26
• Anlogic EG4S20 FPGA DataSheet V1.4
• Three-phase dual-buck grid-connected inverter based on sliding mode control
• MCU download program stc-isp-15xx-v6.85.exe
• Xunwei embedded development board iTOP-4412 development board Linux experiment manual
• Huaqing Yuanjian Embedded Linux System Development Technology Detailed Explanation - Based on ARM (Internal Information)
• Multisim Electronic Circuit Simulation Tutorial
• Cadence Allegro PCB Design 16.2 Download
• en.x-cube-mcsdk-ful_5.1.1
• Standard Digital Circuit 54-74HC Full Series High Speed ​​CMOS Data Manual (Chinese).pdf

Just Take a LookMore

• TI's TPS92610-Q1 is a single-channel LED driver
  The TPS92610-Q1 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS92610-Q1, a single-channel linear LED driver for automotive lighting applications. It enables p
• Good video material sharing on UWB in detail
  Want to learn more about UWB? QORVO recently released a related video. Let's take a look.UWB: Because Location Matters EE Journal Chalk TalkThis is really a very good video material. If you want to kn
• Please tell me how to use low power resistors when connecting LEDs in series and parallel
  In the picture, the LED is 0.5W/2V, 12 LEDs are connected to 24V, the resistance = 2V*6/250mA*2=24R, right? Then the power of the resistor is 2V*6*250mA*2=6W? Because the chip resistors used are not s
• A port to type C port problem
  A port to type C port problem
• Build a Prank HID Device with Pico and CircuitPython
  In the official blog, element14 introduced a project to build a prank HID device using Pico and CircuitPython.The main idea is to use PICO to emulate the keyboard and mouse sending random keys.[hide]h
• Simulink and UDS on Can
• ATMEGA88PA MCU running clock problem
• [Flower carving hands-on] Interesting and fun music visualization series of small projects (21) - CD disc light
• How to optimize FPGA design area
• pic18f6722 compilation error, what is the problem?

Trending Downloads

• MCU Design Archive
• Synchronous system.ppt
• Power management chip max1917
• Electromagnetic Compatibility Testing Technology (Northwestern Polytechnical University Press + 2008)
• Common component 3D package library: CAP PR3.5x8x11.5mm RA
• Data sharing: _Wire antenna optimization
• SVPWM and midpoint potential control method for single-phase three-level rectifier
• Capacitor Overview-25 pages-1.3M.ppt
• Working principle of pressure transmitter
• SLAVR743

Trending ArticlesMore

• Hikvision directors Hu Yangzhong and Gong Hongjia investigated by China Securities Regulatory Commission for suspected illegal information disclosure
• 【Reference Design Selection】Battery-free Near Field Communication (NFC) Keyboard
• Agenda revealed! RT-Thread topic: Implementing efficient audio and video playback in embedded low-resource systems
• Through patent documents, why does Tesla dare to let car owners drive on 4680 batteries?
• The first in the communications industry! China Smart Tower White Paper released
• [Shishuo Chip] ROS+TMC4671 enables rapid development of robot control systems
• Good news | Renesas Electronics won the 2023 "Cooling and Warming Intelligent Manufacturing·Golden Wisdom Award" and the Supply Chain Product Double Award
• Performance exploded! Domestic chip dark horse 5G mobile phone revenue soared 1458%
• SIGGRAPH 2023 | NVIDIA releases major Omniverse upgrade supporting generative AI and OpenUSD
• Domestic motherboard based on CPCI bus connection