Hello everyone, when the LSM6DS3TR-C is configured in the I2C address, when the SA0 pin is connected to GND, there is a 10k pull-down resistor. The power consumption will increase by 0.5mA compared to
Currently, the price of chips is rising, and both domestic and imported chips are more or less out of stock.In fact, large factories usually have suppliers to supply goods at low prices, and delivery
I took advantage of the weekend to debug the experiment of communicating between the Erha sensor and the serial assistant using CH340. During the experiment, I found that the baud rate can only be set
Designing ZigBee applications for use with energy harvesting sources presents many challenges. One of the most difficult harvesters to use is a self-powered switch, as so little energy is generated. U