J-link connection problem1. Keil5 can connect to J-link and burn to the board, but J-falsh cannot connect to J-link, let alone burn to the board. What is the reason? Is J-falsh set incorrectly? (Are J
Since the USB-IF organization released the USB Type-C standard in 2013 and LeTV released the first mobile phone with a USB Type-C interface in 2014, the popularization of the USB-C interface has becom
[i=s]This post was last edited by zhang7309 on 2019-6-21 23:25[/i]Project Name: Indoor Environment Monitoring Terminal
1. Introduction:The indoor environment monitoring terminal can monitor the indoor
I found this using the stm32f103c8t6 minimum system board. When the ADC is converting, the reading value is normal without the sensor plugged in, but when the sensor is plugged in, the data fluctuates
I want to send MP3 through 433M wireless module, and the other end will send it to the microcontroller after receiving it. The microcontroller will decode and play it through the decoding chip. I don'