Download>Category>IC Design and Manufacturing>Freescale HCS12 Microcontroller Datasheet

rar

Freescale HCS12 Microcontroller Datasheet

2013-09-22
147.82KB
Points it Requires : 1

repReport

Document Introduction
You Might Like
Recommended Downloads

Freescale HCS12 microcontroller data Features: 8/10 bit accuracy • 7 us, 10-bit single conversion time. • Sampling buffer amplifier • Programmable sampling time • Left/right alignment, signed/unsigned result data • External trigger control • Conversion completion interrupt • Analog input 8 channel multiplexing • Analog/digital input pin multiplexing • 1 to 8 conversion sequence length • Continuous conversion mode • Multi-channel scanning mode The conversion sequence length is the number of channels to be converted. For example: Channels 0, 1, and 2 are used as AD acquisition channels, so the conversion sequence is 3, that is, S2C=1, S1C=1 In control register 5 ATD0CTL5: Set CC CB CA = 0 0 0, the conversion sequence starts from channel 0; ATD0DR0, ATD0DR1, and ATD0DR2 store the conversion results Set CC CB CA = 0 1 0, the conversion sequence starts from channel 2. It is still ATD0DR0, ATD0DR1, and ATD0DR2 that store the conversion results

unfold

You Might Like

Uploader

: hellopinkgirls

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

Merry Christmas
[size=4]:pleased:Although it is a foreign festival, the important thing is to hope that everyone has a good time and is happy. Merry Christmas! [/size][size=4] [/size]attach://394214.mp4[size=4] Here
Effects of loop gain and loop phase shift on stability
We can have such a qualitative understanding: the smaller the loop gain (feedback depth) D of the negative feedback system, the easier it is to stabilize. The loop gain D = AOL/G, where AOL is the ope
The bulb lamp has high PF and no flicker. A single piece is 16W. Now I want to output 50W. How to do it? I want a power chip solution or circuit diagram analysis
The bulb lamp has high PF and no flicker. A single bulb is 16W. Now I want to output 50W. How to do it? I want a power chip solution or a circuit diagram analysis{:1_138:}
Help, has anyone played ht1621? Mine doesn't respond at all.
[size=14px][u]Help, has anyone used ht1621 before? Mine doesn't work at all. Can anyone give me a circuit diagram or program? Please give me some simple instructions. [/u][/size][url=http://preview.da
Programming with MicroPython：Embedded Programming with Microcontrollers and ...
Programming with MicroPython：Embedded Programming with Microcontrollers and Pythonhttps://download.eeworld.com.cn/detail/lcofjp/565577
Measuring and Suppressing Soft Errors in Memory Devices
Is the forum exchange activity suspended?
Video of Glowing Bubble Clock
EEWORLD University ---- Computer Networks (Harbin Institute of Technology)
Is it necessary to add a π-type filter circuit for serial communication? If the board is small and the space is limited, this must be considered.

Trending Downloads

Trending ArticlesMore

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号

×