[i=s]This post was last edited by Rambo on 2020-3-12 14:02[/i]The mainboard used is DFRobot's latest FireBeetleESP32 mainboard, which is much smaller than the traditional Arduino Uno mainboard. In add
DMA interrupt: During data transmission, when the DMAxSZ register value decreases to 0, DMA sets DMAIFG. The DMA interrupt and DAC12 module share the interrupt vector. When using the interrupt, the so
According to the tutorial, build the development environment and serial port routine test.1. Download the software1.1 Development board resources
Download address: RVB26011.2. USB to TTL driverUSB to
I want to use CD4051 to switch 10V voltage. My control is 5V, but CD4051 needs 7V for high level when VDD=10V, so I use CD4504B to convert the level. I don't know if there is a better chip than CD4051
# Lichee RV 86 PANEL Review (3) - Building a cross-compilation chain under WSL single system## Why download cross-compilation tools? The compilation tool chain on the PC is gcc, ld, objcopy, objdump,