The LLC converter has become a widely used topology for PC, server and TV power supplies due to its simplicity and high efficiency. Its resonant operation enables soft switching over the full load ran
The chip used is 10AS016E3F27. When using JTAG to burn the sof file, I encountered a problem.
When msel is set to ps (000/001) mode, programming is normal
When msel is set to as (011) mode, programmin
#define LED pin
led=[12,13,14,15,16,17,18,19]
leds = [Pin(led[i], Pin.OUT) for i in range(0,8)]What I don't understand is why there is a statement on the left side of for. I have never seen this form
Problem description:In Proteus simulation, a network label error occursSolution:Modify the network label. For example, if the error message shows that the network label is D5, change the label D5 to P