The DS26504 is a clock recovery device for the Building Integrated Timing Supply System (BITS). The chip can also be used as a basic T1/E1 transceiver. The receiving section can recover clocks from T1, E1, 64kHz composite clock (64KCC), and 6312kHz synchronous timing interfaces. In T1/E1 mode, the synchronization status message (SSM) can also be recovered. The transmitting section can be directly connected to the T1, E1, or 64KCC composite clock synchronization interface, and can also provide SSM in T1 and E1 modes. The DS26504 can convert between any supported internal synchronous clock frequency and any supported external clock frequency. The DS26504 can also receive 8kHz and 19.44MHz reference clocks. An independent output provides a 6312kHz clock signal, and the device can be controlled through the parallel, serial, or hardware control port. Application use: BITS timing rate conversion
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore