We first power on and connect the network cable, the development board will default to the IP address 192.168.3.11
So our computer needs to be connected to the same router, and then set the IP. Here I
Project background (100-200 words)With the arrival of an aging society, it is a practical problem to meet the audio-visual and spiritual needs of the elderly with low-cost hardware. This project hopes
The following circuit is designed with a DCDC input voltage of 11V--15V and an output of 12V 1A
But now the output voltage is equal to the input voltage
What's going on? Can you guys analyze it for me
After the square wave passes through an integrating circuit, the amplitude of the triangular wave will change with the frequency of the square wave. So how can we keep the amplitude of the triangular
Altium Designer 17, 18, and 19 changed the way coordinate files are exported.
I changed an export method that has been used for more than ten years. Overall, the export seems to be a little freer, but