Please help me sir!!!
Please help me, some parts are really hard to handle
Doing proteus simulation
Requirements: Use 20Ω/30W hollow porcelain tube resistance heating, use a single-chip microcomputer
This example uses the PWM of the msp430f149 microcontroller to control the rotation of the stepper motor. The P1.2 port is used as the PWM output port. The PWM signal period is 10KHZ and the duty cycl
[i=s]This post was last edited by qwqwqw2088 on 2019-3-13 09:52[/i] [size=4] Recently, with OPPO joining the Wireless Charging Alliance, the alliance has 190+ corporate members. In terms of quantity,
i.MX6UL/i.MX6ULL Development FAQ
Based on Mir Electronics i.MX6UL/i.MX6ULL products
2.2 How to tailor kernel make menuconfig and add new devices?Answer: The following describes how to configure the ke
If the mobile phone signal strength is -90dbm (medium strength), the conversion success rate = 10^-6mw (is the calculation correct?) Is the signal received by the mobile phone so small? Only 1uW