Z: Tape and reel packing (Picked from the 8/9/10/12-pin side)
Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
TYPES
1. Standard (B.B.M.) type/Surge breakdown voltage (between contact and coil) 2,500 V/ Breakdown voltage (between open
contacts) 1,000 V
1) Standard PC board terminal
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2-1.5V
TXD2-3V
TXD2-4.5V
TXD2-5V
TXD2-6V
TXD2-9V
TXD2-12V
TXD2-24V
1 coil latching
Part No.
TXD2-L-1.5V
TXD2-L-3V
TXD2-L-4.5V
TXD2-L-5V
TXD2-L-6V
TXD2-L-9V
TXD2-L-12V
TXD2-L-24V
2 Form C
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
-1.5V
-3V
-4.5V
-5V
-6V
-9V
-12V
-24V
1 coil latching
Part No.
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
-L-1.5V
-L-3V
-L-4.5V
-L-5V
-L-6V
-L-9V
-L-12V
-L-24V
2 Form C
: For each surface-mount terminal identification, input the ollowing letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
ASCTB19E 201209-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
TX-D
(2) Tape and reel packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S -1.5V-Z
TXD2S -3V-Z
TXD2S -4.5V-Z
TXD2S -5V-Z
TXD2S -6V-Z
TXD2S -9V-Z
TXD2S -12V-Z
TXD2S -24V-Z
1 coil latching
Part No.
TXD2S -L-1.5V-Z
TXD2S -L-3V-Z
TXD2S -L-4.5V-Z
TXD2S -L-5V-Z
TXD2S -L-6V-Z
TXD2S -L-9V-Z
TXD2S -L-12V-Z
TXD2S -L-24V-Z
2 Form C
: For each surface-mount terminal identification, input the ollowing letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-1” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-1-Z)
2. M.B.B type/Surge breakdown voltage (between contact and coil) 2,500 V/ Breakdown voltage (between open contacts)
1,000 V
1) Standard PC board terminal
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Single side stable
Part No.
TXD2-2M-1.5V
TXD2-2M-3V
TXD2-2M-4.5V
TXD2-2M-5V
TXD2-2M-6V
TXD2-2M-9V
TXD2-2M-12V
TXD2-2M-24V
2 Form C
2) Surface-mount terminal
(1) Tube packing
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S -2M-1.5V
TXD2S -2M-3V
TXD2S -2M-4.5V
TXD2S -2M-5V
TXD2S -2M-6V
TXD2S -2M-9V
TXD2S -2M-12V
TXD2S -2M-24V
2 Form C
: For each surface-mount terminal identification, input the ollowing letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
(2) Tape and reel packing
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
TXD2S
-2M-1.5V-Z
-2M-3V-Z
-2M-4.5V-Z
-2M-5V-Z
-2M-6V-Z
-2M-9V-Z
-2M-12V-Z
-2M-24V-Z
2 Form C
: For each surface-mount terminal identification, input the ollowing letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Types designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered.
However, please contact us if you need parts for use in low level load. (Ex. TXD2SA-2M-1.5V-1-Z)
2. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ASCTB19E 201209-T
TX-D
3. Standard (B.B.M.) type/Surge breakdown voltage (between contact and coil) 6,000 V/ Breakdown voltage (between open
contacts) 1,000 V
1) Standard PC board terminal
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2-1.5V-6
TXD2-3V-6
TXD2-4.5V-6
TXD2-5V-6
TXD2-6V-6
TXD2-9V-6
TXD2-12V-6
TXD2-24V-6
1 coil latching
Part No.
TXD2-L-1.5V-6
TXD2-L-3V-6
TXD2-L-4.5V-6
TXD2-L-5V-6
TXD2-L-6V-6
TXD2-L-9V-6
TXD2-L-12V-6
TXD2-L-24V-6
2 Form C
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-7” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S -1.5V-6
TXD2S -3V-6
TXD2S -4.5V-6
TXD2S -5V-6
TXD2S -6V-6
TXD2S -9V-6
TXD2S -12V-6
TXD2S -24V-6
1 coil latching
Part No.
TXD2S -L-1.5V-6
TXD2S -L-3V-6
TXD2S -L-4.5V-6
TXD2S -L-5V-6
TXD2S -L-6V-6
TXD2S -L-9V-6
TXD2S -L-12V-6
TXD2S -L-24V-6
2 Form C
: For each surface-mount terminal identification, input the ollowing letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-7” to the end of the part number for AgPd contacts (low level load).
(2) Tape and reel packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S -1.5V-6-Z
TXD2S -3V-6-Z
TXD2S -4.5V-6-Z
TXD2S -5V-6-Z
TXD2S -6V-6-Z
TXD2S -9V-6-Z
TXD2S -12V-6-Z
TXD2S -24V-6-Z
1 coil latching
Part No.
TXD2S -L-1.5V-6-Z
TXD2S -L-3V-6-Z
TXD2S -L-4.5V-6-Z
TXD2S -L-5V-6-Z
TXD2S -L-6V-6-Z
TXD2S -L-9V-6-Z
TXD2S -L-12V-6-Z
TXD2S -L-24V-6-Z
2 Form C
: For each surface-mount terminal identification, input the ollowing letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-7” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-7-Z)
ASCTB19E 201209-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
TX-D
4. Standard (B.B.M.) type/Surge breakdown voltage (between contact and coil) 6,000 V/ Breakdown voltage (between open
contacts) 1,500 V (High breakdown voltage type)
1) Standard PC board terminal
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2-1.5V-3
TXD2-3V-3
TXD2-4.5V-3
TXD2-5V-3
TXD2-6V-3
TXD2-9V-3
TXD2-12V-3
TXD2-24V-3
1 coil latching
Part No.
TXD2-L-1.5V-3
TXD2-L-3V-3
TXD2-L-4.5V-3
TXD2-L-5V-3
TXD2-L-6V-3
TXD2-L-9V-3
TXD2-L-12V-3
TXD2-L-24V-3
2 Form C
Standard packing: Tube: 40 pcs.; Case: 800 pcs.
Note: Please add “-4” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S -1.5V-3
TXD2S -3V-3
TXD2S -4.5V-3
TXD2S -5V-3
TXD2S -6V-3
TXD2S -9V-3
TXD2S -12V-3
TXD2S -24V-3
1 coil latching
Part No.
TXD2S -L-1.5V-3
TXD2S -L-3V-3
TXD2S -L-4.5V-3
TXD2S -L-5V-3
TXD2S -L-6V-3
TXD2S -L-9V-3
TXD2S -L-12V-3
TXD2S -L-24V-3
2 Form C
: For each surface-mount terminal identification, input the ollowing letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 800 pcs.
Note: Please add “-4” to the end of the part number for AgPd contacts (low level load).
(2) Tape and reel packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2SA-1.5V-3-Z
TXD2SA-3V-3-Z
TXD2SA-4.5V-3-Z
TXD2SA-5V-3-Z
TXD2SA-6V-3-Z
TXD2SA-9V-3-Z
TXD2SA-12V-3-Z
TXD2SA-24V-3-Z
1 coil latching
Part No.
TXD2SA-L-1.5V-3-Z
TXD2SA-L-3V-3-Z
TXD2SA-L-4.5V-3-Z
TXD2SA-L-5V-3-Z
TXD2SA-L-6V-3-Z
TXD2SA-L-9V-3-Z
TXD2SA-L-12V-3-Z
TXD2SA-L-24V-3-Z
2 Form C
*Only for SA type.
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-4” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-4-Z)
Non-blocking assignment will calculate the RHS at the same time, which means that the three RHS should take random values at the same time, so the three LHS should be the same, but the results are dif...
I received the development board yesterday and spent the whole morning porting the LCD driver. The code was copied from the original GD32F350 project. Although it is not complicated, it took some time...
Recent trends show that color screens are rapidly becoming standard features of most new mobile phones, PDAs and digital cameras. Color screens, games , Internet browsing and text messaging require lo...
In the process of developing embedded applications, although good programming practices and appropriate coding standard detection software can reduce the number of errors in the code writing stage, it...
Which board is better for getting started? Some boards are very expensive. I have learned the basics of microcontrollers in college. I would like to ask for help from an expert!...
I want to read the camera data. The camera has an FPD-LINK2 interface, which has only one pair of LVDS differential data lines (similar to UART). Because there is no synchronous clock, I checked some ...
In the process of vehicle equipment inspection, maintenance and repair, the existing external
power supply
is large in size and weight and difficult to move, which brings many difficulti...[Details]
Although biometric technology has only been used for a short time, there have been many negative reports about it. Many companies and security experts believe that fingerprint technology has problems,...[Details]
Human Horizons held a "New Generation of Smart Cars Category Launch Conference" and launched a new luxury smart pure electric brand "HiPhi". Its first mass-produced model, HiPhi 1, was also officiall...[Details]
It's winter.
Along with the temperature dropping to freezing point, the popularity of applications for the fifth batch of incremental distribution reform pilot projects also increased.
Af...[Details]
This article shares with you an example of DIY wireless LED lights using the principle of electromagnetic induction. First, we need to prepare some simple and common components: the first is the coil...[Details]
The smart home market is booming, and home appliances are rushing to catch up. However, some smart functions seem to be superfluous. Smart kettles have been criticized: "Why do I have to open ...[Details]
It has been 10 days since I last wrote about my journey. It was the National Day holiday, so I gave myself a few days off - I played some games, chess, etc. In fact, it took a lot of time a...[Details]
Metal rotor flowmeter is used to measure the flow of liquid, gas and steam, and is particularly suitable for measuring the flow of medium with low flow rate. Therefore, the application points of metal...[Details]
1. Timer Introduction The timers of STM32F4 are distributed as follows: - The basic timers include TIM6 and TIM7, which have the simplest structure and the most basic timing functions. One is use...[Details]
With the birth and rapid development of semiconductor devices and computer technology, the traditional electromechanical switching structure has been severely impacted, making it electronic. Today, i...[Details]
On the morning of November 16, the first benchmark test of Apple's self-developed chip M1 appeared on the Geekbench website, with a score exceeding Intel's i9. Today, new results for the M1 chip...[Details]
The circuit uses the MSFS5 selectable low-pass/bandpass switched capacitor filter to eliminate the harmonics of a square wave applied to its input. The clock of the MSFS5 is 100 times the input squar...[Details]
The island phenomenon refers to the situation where when the power supply of the power grid is disconnected due to a fault accident or power outage for maintenance, the distributed grid-connected pow...[Details]
Portable devices such as mobile phones, digital cameras, digital video cameras, and PMPs have become carriers of a large amount of high-definition multimedia content, including captured high-resoluti...[Details]
A CAN bus repeater is a device used to extend a CAN bus network. It can amplify and forward CAN bus signals to achieve longer-distance communication. This article will detail the installation locat...[Details]