V FPGAs include innovations such as an enhanced core architecture, integrated
transceivers up to 28.05 gigabits per second (Gbps), and a unique array of integrated hard intellectual
property (IP) blocks.
With these innovations, Stratix V FPGAs deliver a new class of application-targeted devices optimized for:
• Bandwidth-centric applications and protocols, including PCI Express
®
(PCIe
®
) Gen3
• Data-intensive applications for 40G/100G and beyond
• High-performance, high-precision digital signal processing (DSP) applications
Stratix V devices are available in four variants (GT, GX, GS, and E), each targeted for a different set of
applications. For higher volume production, you can prototype with Stratix V FPGAs and use the low-
risk, low-cost path to HardCopy
®
V ASICs.
Related Information
Stratix V Device Handbook: Known Issues
Lists the planned updates to the
Stratix V Device Handbook
chapters.
Stratix V Family Variants
The Stratix V device family contains the GT, GX, GS, and E variants.
Stratix V GT
devices, with both 28.05-Gbps and 12.5-Gbps transceivers, are optimized for applications
that require ultra-high bandwidth and performance in areas such as 40G/100G/400G optical communica‐
tions systems and optical test systems. 28.05-Gbps and 12.5-Gbps transceivers are also known as GT and
GX channels, respectively.
Stratix V GX
devices offer up to 66 integrated transceivers with 14.1-Gbps data rate capability. These
transceivers also support backplane and optical interface applications. These devices are optimized for
high-performance, high-bandwidth applications such as 40G/100G optical transport, packet processing,
and traffic management found in wireline, military communications, and network test equipment
markets.
Stratix V GS
devices have an abundance of variable precision DSP blocks, supporting up to 3,926 18x18
or 1,963 27x27 multipliers. In addition, Stratix V GS devices offer integrated transceivers with 14.1-Gbps
data rate capability. These transceivers also support backplane and optical interface applications. These
devices are optimized for transceiver-based DSP-centric applications found in wireline, military,
broadcast, and high-performance computing markets.
2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html.
Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
See a battery switching circuit, as shown below,
1. Q1 and Q2 are NMOS tubes, Q3, Q4 and Q5 are PMOS tubes, and D1 is a diode.
2. BAT1 and BAT2 are batteries. The capacity of BAT2 is larger than that ...
Connect the TF card to the development board, set the DIP switch to TF card boot, and enter the uboot mode, as shown in the figure below.As shown in the figure below, use the command "fastboot" and th...
I want to use the wakeup interrupt of LSM6DSL to detect the acceleration of the z-axis. The general idea is: set the WAKE_UP_THS interrupt threshold. When the z-axis acceleration exceeds the threshold...
[align=left][size=4][color=#000000][backcolor=white]Ever wonder how sigma-delta analog-to-digital converters (ADCs) can achieve such high resolution over varying bandwidths? The secret is in the digit...
Usually, when implementing the IAP function, two project codes need to be written when designing the firmware program. The first project program, namely the BOOT program, does not perform normal funct...
Dry Cell Dry cell is a chemical battery that generates direct current with a paste electrolyte. It is roughly divided into primary cell and secondary cell. It is the most commonly used and lightweigh...[Details]
First of all, this problem took me a lot of time to debug, which was quite depressing; 1. The same function was used to initialize and configure USART2 and USART3 at the same time. USART2 worked no...[Details]
"Reporting to the command center, the second remote special patrol of the 220 kV Jinxiu substation has been completed today. All 3581 patrol operations have been fully covered and executed. All mon...[Details]
Are headphones only used to listen to music? You may not be using them correctly. Happy consumption for oneself has become a highlight moment for young people. The visual pleasure brought by the colo...[Details]
Jiangsu's first shared energy storage station, the Jiangsu Fengchu Shared Energy Storage Project, was connected to the grid and put into operation on November 29, 2023. So far, it has been operating s...[Details]
Scrambling and descrambling technology
Scrambling and descrambling technology is used to encrypt and decrypt digital programs. Its basic principle is to use the method of scrambling control wo...[Details]
The MCU assembly sets the crystal frequency to 11.0592M, the serial port working mode to 1, and the baud rate to 4800bit/s (after frequency multiplication) 1. Assume the crystal frequency is 11.0592...[Details]
Qualcomm launches Snapdragon Ride Flex, the automotive industry’s first scalable family of SoCs supporting both digital cockpits and advanced driver assistance systems Key points: • The Snapdra...[Details]
Leakage Current Testing
The leakage current (IL) across an HBLED is measured when a reverse voltage below the breakdown voltage is applied, typically using a moderate voltage. In production testing, ...[Details]
Will 145 billion euros (about 175 billion U.S. dollars) be enough to rebuild the continent's semiconductor ecosystem capable of manufacturing leading-edge (2nm) processors by 2025? Politicians from 1...[Details]
On September 16, Martin Technologies (Martin) said it would participate in the Stellantis 2021 MatchMaker event and launch its new electronic smart power distribution module (eSPDM) smart wiring tech...[Details]
Micro-electromechanical sensors (MEMS) inertial sensors have developed rapidly in recent years and have been widely used. As an important MEMS, micro-inertial sensors are composed of micro-gyroscopes...[Details]
On March 30, Honeycomb Energy and BASF Shanshan held a signing ceremony for strategic investment in Hunan Yongshan Lithium Co., Ltd. ("Yongshan Lithium" for short). After the signing, Honeycomb Ene...[Details]
Domestic actual scene use sampling survey data analysis report
1 Background
We sent 1,000 reports to actual domestic robot users over a three-month period (February 1, 202...[Details]
In recent years, with the diversification of wireless communication services such as online games and streaming content, the demand for faster data transmission and shorter waiting time has increased...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
