REVISION 2
TTF-3285-XX-XX
32 AWG, 85 Ohm
OPTIONS
SEE TABLE 2
DO NOT
SCALE FROM
THIS PRINT
No OF CONDUCTOR PAIRS
SEE TABLE 1
1. CURRENTLY TOOLED FOR MAXIMUM 10 PAIRS
2. SINGLE PAIR WIDTH .0650 NOM
.0640 (TYP)
.0160 REF
.003
C
L
C2
.0435±.003
1
C1
("A" x .064)±"B"
NOTES:
A
1.
C CX-X-XX
REPRESENTS A CRITICAL DIMENSION.
2. PAIR TO PAIR IS 50 ps/m.
3. PER SAMTEC TEST DOCUMENTS #TC079--1281 AND #TC0710-1288:
STATIC OPERATING TEMPERATURE RANGE IS -55 C TO 125 C.
DYNAMIC OPERATING TEMPERATURE RANGE IS -25 C TO 105 C.
4. 8 WIDE RIBBON MUST PASS 500 MIN BEND FLEX CYCLES, +/- 90 DEGREES,
1/4" DIAMETER MANDREL, WITH 16oz LOAD, AT 20 TO 25 CYCLES PER MIN
FOR LESS THAN A 1 ohm DROP.
5.
4 WIDE RIBBON MUST PASS 8,000 MIN BEND FLEX CYCLES, +/- 90 DEGREES,
7/8" DIAMETER MANDREL, WITH 8oz LOAD AT 20 TO 25 CYCLES PER MIN.
6. MIN BEND RADIUS: .125 FOR LESS THAN A 1.0 ohm DROP
7. CABLE COMPLIANCES TO BE KEPT AT MANUFACTURER FOR REFERENCE.
8. REFER TO NA-CA-W1-3001-M PVC RIBBONIZATION FOR PACKAGING STANDARDS
SINGLE PAIR SHIPPED ON REEL CR-9.842-6.3-6.3-1.
9. REFERENCE TX-3285-01 FOR ELECTRICAL SPECIFICATIONS.
10. 4 WIDE RIBBON TENSILE STRENGTH IS 17 LBS MAX WHEN PULLED IN TWO DIFFERENT DIRECTIONS
ALONG THE SAME AXIS.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.XX: .01 [.3]
2
.XXX: .003 [.08]
.XXXX: .0015 [.038]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 8:1
CONDUCTOR: SILVER PLATED COPPER
DIELECTRIC: FEP
OUTER JACKET: PVC
F:\DWG\MISC\MKTG\TTF-3285-XX-XX-MKT.SLDDRW
SAMTEC TWIN-AX CABLE
TTF-3285-XX-XX
04/05/2010
SHEET
1
OF
1
BY:
FABIAN F.