SPECIFICATION
Part No.
:
PCB.SMAFST.2H.B.HT
SMA (F) Jack 2 Hole Panel Mount with Solder Post
Termination
Product Name
:
Feature
:
SMA(F) Jack
2 Hole Panel Mount with Solder Post Termination
Frequency Range: 0~12.4GHz
Finish: Nickel
Post Length: 2mm
Total Length: 11.52mm
RoHS Compliant
SPE-12-8-141/A/WY
Page 1 of 3
1. Introduction
The PCB.SMAFST.2H.A.HT connector was designed to be mounted on a PCB, it has a Solder Post
for connection and 2 Mounting holes. The connector pin is directly soldered onto pads on the PCB.
The connector is a standard SMA (F) Jack. The SMA connector is the most popular type
connector for RF applications. Taoglas connectors are all RoHS compliant.
2. Specification
ELECTRICAL
Impedance
Frequency Range
Working Voltage
Dielectric withstanding Voltage
Insulation Resistance
MECHANICAL
Connector Dimension
Connector Pin Diameter
Connector Pin Height
Connector Type
ENVIRONMENTAL
RoHS compliant
11.52 X 15.88 mm
1.27 mm
2 mm
SMA (F)
50Ω
0~12.4 GHz
Max. 335 Vrms
≤1000 Vrms
≥5000M Ω
SPE-12-8-141/A/WY
Page 2 of 3
3. Connector Drawing
Name
1
2
3
Body
Female Contact
Insulator
Material
Brass
Phosphor Bronze
Teflon
Finish
Nickel
Gold
White
QTY
1
1
1
Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to
make changes to specifications and product descriptions at any time without notice.
Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties
without express permission is strictly prohibited. Copyright © 2012, Taoglas Ltd.
SPE-12-8-141/A/WY
Page 3 of 3