CLD-DS102 REV 2P
PRODUCT FAMILY DATA SHEET
Cree
®
XLamp
®
MHB-A LEDs
PRODUCT DESCRIPTION
The XLamp
®
MHB-A LED is a new
generation of high-power LED that
delivers a more effective way to achieve
low-cost systems than mid-power (MP)
LEDs. Built using Cree’s high-reliability
ceramic-package technology, the XLamp
MHB-A LED is able to operate at higher
temperatures than MP LEDs with no
reduction in rated lifetime, enabling an
impressive 60% reduction in heat sink
size and cost. Using up to 26 times
fewer LEDs than MP LEDs to achieve
the same performance, the XLamp
MHB-A LED is optimized to simplify
LED system designs for directional and
semi-directional applications.
FEATURES
•
•
•
•
•
•
•
•
•
Flexible 9-V, 18-V or 36-V options
Maximum drive current: 700 mA (9 V),
350 mA (18 V), 175 mA (36 V)
Viewing angle: 115°
Available in 70-CRI, 80-CRI and 90-CRI
options
Unlimited floor life at ≤ 30 ºC/85% RH
Reflow solderable - JEDEC
J-STD-020C
Electrically neutral thermal path
RoHS and REACh compliant
UL
®
recognized component (E349212)
TABLE OF CONTENTS
Characteristics ...........................................2
Flux Characteristics, EasyWhite
®
Order
Codes and Bins - 9 V
..................................3
Flux Characteristics, EasyWhite
®
Order
Codes and Bins - 18 V
................................6
Flux Characteristics, EasyWhite
®
Order
Codes and Bins - 36 V
................................9
Relative Spectral Power Distribution ......12
Relative Flux vs. Junction Temperature
..12
Electrical Characteristics.........................13
Relative Flux vs. Current ..........................14
Relative Chromaticity vs. Current............16
Relative Chromaticity vs. Temperature ...17
Typical Spatial Distribution......................17
Thermal Design ........................................18
Performance Groups – Luminous Flux...19
Performance Groups – Chromaticity......20
Cree’s Standard White Chromaticity
Regions Plotted on the 1931 CIE Curve..21
Bin and Order Code Formats ...................22
Reflow Soldering Characteristics
............23
Notes ........................................................24
Mechanical Dimensions ..........................26
Tape and Reel ...........................................27
WWW.CREE.COM/XLAMP
Packaging .................................................28
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo,
XLamp
®
and EasyWhite
®
are registered trademarks of Cree, Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLAMP
®
MHB-A LED
CHARACTERISTICS
Characteristics
Thermal resistance, junction to solder point
Viewing angle (FWHM)
Temperature coefficient of voltage (9 V)
Temperature coefficient of voltage (18 V)
Temperature coefficient of voltage (36 V)
ESD withstand voltage (HBM per Mil-Std-883D)
DC forward current (9 V)
DC forward current (18 V)
DC forward current (36 V)
Reverse current (9 V, 18 V, 36 V)
Forward voltage (9 V, @ 480 mA, 85 °C)
Forward voltage (9 V, @ 480 mA, 25 °C)
Forward voltage (18 V, @ 240 mA, 85 °C)
Forward voltage (18 V, @ 240 mA, 25 °C)
Forward voltage (36 V, @ 120 mA, 85 °C)
Forward voltage (36 V, @ 120 mA, 25 °C)
LED junction temperature
Unit
°C/W
degrees
mV/°C
mV/°C
mV/°C
V
mA
mA
mA
mA
V
V
V
V
V
V
°C
37
42
150
18.5
21
9.25
10.5
480
240
120
Minimum
Typical
5.5
115
-4
-8
-16
8000
700
350
175
0.1
Maximum
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo, XLamp
®
and EasyWhite
®
are registered trademarks of Cree,
Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
2
XLAMP
®
MHB-A LED
FLUX CHARACTERISTICS, EASYWHITE
®
ORDER CODES AND BINS - 9 V
The following table provides order codes for XLamp MHB-A LEDs. For a complete description of the order code nomenclature, please see
the Bin and Order Code Formats section (page 22).
Test condition: T
J
= 85 °C, 9 V, I
F
= 480 mA
CRI
Min
Minimum Luminous Flux
@ 480 mA
Group
D2
70
D4
E2
C4
6500 K
80
D2
D4
B4
90
C2
C4
D2
70
D4
E2
C4
5700 K
80
D2
D4
B4
90
C2
C4
Flux (lm)
@ 85 °C
510
550
590
475
510
550
410
440
475
510
550
590
475
510
550
410
440
475
Flux (lm)
@ 25 °C*
570
615
660
531
570
615
459
492
531
570
615
660
531
570
615
459
492
531
57E
57E
57E
65E
65E
65E
Group
2-Step
Order Code
Group
3-Step
Order Code
Group
5-Step
Order Code
MHBAWT-0000-
000C0BD265E
MHBAWT-0000-
000C0BD465E
MHBAWT-0000-
000C0BE265E
MHBAWT-0000-
000C0HC465E
MHBAWT-0000-
000C0HD265E
MHBAWT-0000-
000C0HD465E
MHBAWT-0000-
000C0UB465E
MHBAWT-0000-
000C0UC265E
MHBAWT-0000-
000C0UC465E
MHBAWT-0000-
000C0BD257E
MHBAWT-0000-
000C0BD457E
MHBAWT-0000-
000C0BE257E
MHBAWT-0000-
000C0HC457E
MHBAWT-0000-
000C0HD257E
MHBAWT-0000-
000C0HD457E
MHBAWT-0000-
000C0UB457E
MHBAWT-0000-
000C0UC257E
MHBAWT-0000-
000C0UC457E
Nominal
CCT
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo, XLamp
®
and EasyWhite
®
are registered trademarks of Cree,
Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
3
XLAMP
®
MHB-A LED
FLUX CHARACTERISTICS, EASYWHITE
®
ORDER CODES AND BINS - 9 V - CONTINUED
Nominal
CCT
CRI
Min
Minimum Luminous Flux
@ 480 mA
Group
D2
70
D4
E2
C4
5000 K
80
D2
D4
B4
90
C2
C4
C4
D2
70
D4
E2
4000 K
80
D2
B2
90
B4
C2
510
380
410
440
570
425
459
492
40H
C4
550
590
475
615
660
531
40H
MHBAWT-0000-
000C0HC440H
MHBAWT-0000-
000C0HD240H
MHBAWT-0000-
000C0UB240H
MHBAWT-0000-
000C0UB440H
MHBAWT-0000-
000C0UC240H
40G
MHBAWT-0000-
000C0HC440G
MHBAWT-0000-
000C0HD240G
MHBAWT-0000-
000C0UB240G
MHBAWT-0000-
000C0UB440G
MHBAWT-0000-
000C0UC240G
Flux (lm)
@ 85 °C
510
550
590
475
510
550
410
440
475
475
510
Flux (lm)
@ 25 °C*
570
615
660
531
570
615
459
492
531
531
570
40E
50G
50G
MHBAWT-0000-
000C0HC450G
MHBAWT-0000-
000C0HD250G
MHBAWT-0000-
000C0HD450G
MHBAWT-0000-
000C0UB450G
MHBAWT-0000-
000C0UC250G
MHBAWT-0000-
000C0UC450G
50E
50E
50E
Group
2-Step
Order Code
Group
3-Step
Order Code
Group
5-Step
Order Code
MHBAWT-0000-
000C0BD250E
MHBAWT-0000-
000C0BD450E
MHBAWT-0000-
000C0BE250E
MHBAWT-0000-
000C0HC450E
MHBAWT-0000-
000C0HD250E
MHBAWT-0000-
000C0HD450E
MHBAWT-0000-
000C0UB450E
MHBAWT-0000-
000C0UC250E
MHBAWT-0000-
000C0UC450E
MHBAWT-0000-
000C0BC440E
MHBAWT-0000-
000C0BD240E
MHBAWT-0000-
000C0BD440E
MHBAWT-0000-
000C0BE240E
40G
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo, XLamp
®
and EasyWhite
®
are registered trademarks of Cree,
Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
4
XLAMP
®
MHB-A LED
FLUX CHARACTERISTICS, EASYWHITE
®
ORDER CODES AND BINS - 9 V - CONTINUED
Nominal
CCT
CRI
Min
Minimum Luminous Flux
@ 480 mA
Group
C4
80
D2
A2
3500 K
A4
90
B2
B4
C2
80
C4
D2
3000 K
A2
A4
90
B2
B4
C2
80
C4
A2
2700 K
A4
90
B2
B4
380
410
425
459
355
397
27H
475
330
531
369
380
410
440
425
459
492
27H
380
410
440
475
510
330
355
425
459
492
531
570
369
397
30H
30H
355
397
35H
510
330
570
369
Flux (lm)
@ 85 °C
475
Flux (lm)
@ 25 °C*
531
35H
Group
2-Step
Order Code
MHBAWT-0000-
000C0HC435H
MHBAWT-0000-
000C0HD235H
MHBAWT-0000-
000C0UA235H
MHBAWT-0000-
000C0UA435H
MHBAWT-0000-
000C0UB235H
MHBAWT-0000-
000C0UB435H
MHBAWT-0000-
000C0HC230H
MHBAWT-0000-
000C0HC430H
MHBAWT-0000-
000C0HD230H
MHBAWT-0000-
000C0UA230H
MHBAWT-0000-
000C0UA430H
MHBAWT-0000-
000C0UB230H
MHBAWT-0000-
000C0UB430H
MHBAWT-0000-
000C0HC227H
MHBAWT-0000-
000C0HC427H
MHBAWT-0000-
000C0UA227H
MHBAWT-0000-
000C0UA427H
MHBAWT-0000-
000C0UB227H
MHBAWT-0000-
000C0UB427H
30G
Group
3-Step
Order Code
MHBAWT-0000-
000C0HC435G
MHBAWT-0000-
000C0HD235G
MHBAWT-0000-
000C0UA235G
MHBAWT-0000-
000C0UA435G
MHBAWT-0000-
000C0UB235G
MHBAWT-0000-
000C0UB435G
MHBAWT-0000-
000C0HC230G
MHBAWT-0000-
000C0HC430G
MHBAWT-0000-
000C0HD230G
MHBAWT-0000-
000C0UA230G
MHBAWT-0000-
000C0UA430G
MHBAWT-0000-
000C0UB230G
MHBAWT-0000-
000C0UB430G
MHBAWT-0000-
000C0HC227G
MHBAWT-0000-
000C0HC427G
MHBAWT-0000-
000C0UA227G
MHBAWT-0000-
000C0UA427G
MHBAWT-0000-
000C0UB227G
MHBAWT-0000-
000C0UB427G
Group
5-Step
Order Code
35G
35G
30G
27G
27G
Notes
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
•
Cree XLamp MHB-A LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo, XLamp
®
and EasyWhite
®
are registered trademarks of Cree,
Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
5