EMC1033
1°C Triple SMBus
Sensor with Resistance
Error Correction
PRODUCT FEATURES
General Description
The EMC1033 is an SMBus temperature sensor that
monitors up to three temperature zones and can
generate two system interrupts. With ±1
°C
measurement
accuracy, the EMC1033 provides a low-cost solution for
critical temperature monitoring applications. Features
include automatic resistance error correction and
programmable ideality factor configuration eliminating
both major sources of temperature measurement error.
1
The EMC1033 generates two separate interrupts with
programmable thermal trip points. The
THERM
output
operates as a thermostat with programmable threshold
and hysteresis. The
ALERT
output can be configured
as a maskable SMBus alert with programmable
window comparator limits, or as a second
THERM
output. Both interrupts are maintained in an 8-pin
package while a third temperature zone is added with
the anti-parallel diode technique. This allows the
EMC1033 to be pin compatible with the ADT7461,
ADM1032, LM99, and the MAX6649 with the advantage
of a third temperature zone.
1.Patents pending.
Data Brief
Features
Resistance Error Correction
Ideality Factor Configuration
Select 1 of 4 SMBus addresses with external resistor
Remote Thermal Zones
—
±1.0°C
Accuracy (40°C to 80°C)
— 0.125°C resolution
Internal Thermal Zone
—
±3.0°C
Accuracy (0°C to 85°C)
Maskable Interrupt using
ALERT
One-shot Command during standby
Programmable temperature conversion rate
Extended temperature
(-64°C to 191°C)
available
Over-limit filtering with consecutive counter
Small 8-pin TSSOP lead-free RoHS compliant
package
Applications
Desktop and Notebook Computers
Thermostats
Smart batteries
Industrial/Automotive
Simplified Block Diagram
EMC1033
Address Pointer Register
Switching
Current
DP1
DN2
Analog Mux
Conversion Rate Register
Limit Comparator
Remote Temp
Register 1
Digital Mux
High Limit Registers
Digital Mux
DN1
DP2
11-bit
delta-sigma
ADC
Remote Temp
Register 2
Internal Temp
Register
Low Limit Registers
THERM Limit Register
THERM Hysterisis Register
Configuration Register
Internal
Temp Diode
SMBus Interface
SMCLK
SMDATA
ALERT
THERM
Status Register
Interrupt Masking
SMSC EMC1033
PRODUCT PREVIEW
Revision 1.2 (12-18-07)
1°C Triple SMBus Sensor with Resistance Error Correction
ORDER NUMBER:
EMC1033-ACZL-TR FOR 8 PIN, TSSOP (TAPE AND REEL), LEAD-FREE ROHS COMPLIANT PACKAGE
Reel size is 4,000 pieces.
Evaluation Board available upon request. (EVB-EMC1033)
80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123
Copyright © 2007 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision 1.2 (12-18-07)
2
SMSC EMC1033
PRODUCT PREVIEW
1°C Triple SMBus Sensor with Resistance Error Correction
Package Outline
Figure 1 8-Pin TSSOP Package Outline - 3x3mm Body 0.65mm Pitch
Table 1 8-Pin TSSOP Package Parameters
MIN
A
A1
A2
D
E
E1
H
L
L1
e
0.80
0.05
0.75
2.80
4.65
2.80
0.08
0.40
NOMINAL
~
~
0.85
3.00
4.90
~
~
~
0.95 REF
0.65 BSC
0
o
0.22
~
~
~
~
8
o
0.38
0.10
MAX
1.10
0.15
0.95
3.20
5.15
3.20
0.23
0.80
REMARKS
Overall Package Height
Standoff
Body Thickness
X Body Size
Y Span
Y body Size
Lead Foot Thickness
Lead Foot Length
Lead Length
Lead Pitch
Lead Foot Angle
Lead Width
Coplanarity
θ
W
ccc
Notes:
1. Controlling Unit: millimeters.
2. Tolerance on the true position of the leads is ± 0.065 mm maximum.
3. Package body dimensions D and E1 do not include mold protrusion or flash. Dimensions D and
E1 to be determined at datum plane H. Maximum mold protrusion or flash is 0.15mm (0.006 inches)
per end, and 0.15mm (0.006 inches) per side.
4. Dimension for foot length L measured at the gauge plane 0.25 mm above the seating plane.
5. Details of pin 1 identifier are optional but must be located within the zone indicated.
SMSC EMC1033
3
Revision 1.2 (12-18-07)
PRODUCT PREVIEW