Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Package Dimensions
unit : mm (typ)
7019A-003
MCH3377-TL-E
MCH3377-TL-H
MCH3377-TL-W
0 to 0.02
Product & Package Information
• Package
: MCPH3
• JEITA, JEDEC
: SC-70, SOT-323
• Minimum Packing Quantity : 3,000 pcs./reel
2.0
0.25
3
2.1
1.6
0.15
Packing Type : TL
Marking
QJ
LOT No.
LOT No.
TL
1
0.25
0.65
2
0.3
Electrical Connection
3
0.85
0.07
1 : Gate
2 : Source
3 : Drain
MCPH3
1
2
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of this data sheet.
Semiconductor Components Industries, LLC, 2014
March, 2014
32514HK TC-00002897/60612TKIM/N1407TIIM PE No. A0957-1/5
MCH3377
Electrical Characteristics
at Ta=25°C
Parameter
Drain-to-Source Breakdown Voltage
Zero-Gate Voltage Drain Current
Gate-to-Source Leakage Current
Cutoff Voltage
Forward Transfer Admittance
Static Drain-to-Source On-State Resistance
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Turn-ON Delay Time
Rise Time
Turn-OFF Delay Time
Fall Time
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain “Miller” Charge
Diode Forward Voltage
Symbol
V(BR)DSS
IDSS
IGSS
VGS(off)
|
yfs
|
RDS(on)1
RDS(on)2
RDS(on)3
Ciss
Coss
Crss
td(on)
tr
td(off)
tf
Qg
Qgs
Qgd
VSD
IS=-
-3A, VGS=0V
VDS=-
-10V, VGS=-
-4.5V, ID=-
-3A
See specified Test Circuit.
VDS=--10V, f=1MHz
Conditions
ID=-
-1mA, VGS=0V
VDS=-
-20V, VGS=0V
VGS=±8V, VDS=0V
VDS=-
-10V, ID=-
-1mA
VDS=-
-10V, ID=-
-1.5A
ID=-
-1.5A, VGS=-
-4.5V
ID=-
-1A, VGS=-
-2.5V
ID=-
-0.2A, VGS=-
-1.8V
--0.4
2.2
3.8
63
88
130
375
77
58
8.1
26
42
37
4.6
0.8
1.3
--0.83
--1.2
83
125
200
Ratings
min
-
-20
--1
±10
--1.3
typ
max
Unit
V
μA
μA
V
S
mΩ
pF
pF
pF
ns
ns
ns
ns
nC
nC
nC
V
mΩ
mΩ
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
Switching Time Test Circuit
0V
--4V
VIN
VDD= --10V
ID= --1.5A
RL=6.67Ω
D
VOUT
VIN
PW=10μs
D.C.≤1%
G
P.G
50Ω
MCH3377
S
Ordering Information
Device
MCH3377-TL-E
MCH3377-TL-H
MCH3377-TL-W
MCPH3
3,000pcs./reel
Package
Shipping
memo
Pb-Free
Pb-Free and Halogen Free
Pb-Free and Halogen Free
No. A0957-2/5
MCH3377
--3.0
ID -- VDS
--2.
5V
--4.5V
--5
ID -- VGS
--2.5
--1
.8
VDS= --10V
V
--4
Drain Current, ID -- A
--3.
0V
--2.0
Drain Current, ID -- A
--8.0V
--1.5
--1.5V
--3
--1.0
0
VGS= --1.0V
0
--0.1
--0.2
Drain-to-Source Voltage, VDS -- V
--0.3
--0.4
--0.5
--0.6
--0.7
--0.8
--0.9
--1.0
0
0
--0.5
300
RDS(on) -- VGS
IT13008
Gate-to-Source Voltage, VGS -- V
--1.0
25
°
C
--1.5
--0.5
--1
Ta=7
5
--2
--25
°
C
°
C
--2.0
--2.5
IT13009
Ta=25°C
Static Drain-to-Source
On-State Resistance, RDS(on) -- mΩ
250
RDS(on) -- Ta
Static Drain-to-Source
On-State Resistance, RDS(on) -- mΩ
250
200
200
150
ID= --0.2A
150
--1.0A
--1.5A
100
100
--0.2A
, I D=
8V
= --1.
V GS
--1.0A
,
I D=
--2.5V
A
V GS=
= --1.5
.5V,
I D
--4
V GS=
50
0
50
0
--1
Gate-to-Source Voltage, VGS -- V
--2
--3
--4
--5
--6
--7
10
y
fs -- ID
IT13010
--8
0
--60
--40
--20
Ambient Temperature, Ta --
°
C
0
20
40
60
80
100
120
140
Forward Transfer Admittance,
y
fs -- S
7
5
VDS= --10V
--10
7
5
3
2
IS -- VSD
IT13011
160
VGS=0V
2
1.0
7
5
3
2
0.1
--0.01
Ta
-2
=-
C
5
°
75
°
C
Source Current, IS -- A
3
--1.0
7
5
3
2
--0.1
7
5
3
2
°
C
25
2
3
5 7 --0.1
Drain Current, ID -- A
2
3
5 7 --1.0
2
3
2
SW Time -- ID
5 7 --10
IT13012
--0.001
--0.01
7
5
3
2
0
--0.2
Ta=7
5
°
C
25
°
C
--25
°
C
--0.4
--0.6
VDD= --10V
VGS= --4V
Ciss, Coss, Crss -- pF
1000
7
5
3
2
Ciss, Coss, Crss -- VDS
Ciss
Diode Forward Voltage, VSD -- V
--0.8
--1.0
--1.2
IT13013
f=1MHz
Switching Time, SW Time -- ns
100
7
5
3
2
tf
td (off)
tr
100
7
5
3
Coss
Crss
10
7
5
--0.1
2
3
5
7
td(on)
--1.0
2
3
5
7
--10
2
Drain Current, ID -- A
0
--2
--4
IT13014
Drain-to-Source Voltage, VDS -- V
--6
--8
--10
--12
--14
--16
--18
--20
IT13015
No. A0957-3/5
MCH3377
--4.5
--4.0
--3.5
Gate-to-Source Voltage, VGS -- V
VDS= --10V
ID= --3A
VGS -- Qg
3
2
--10
7
5
ASO
IDP= --12A
PW≤10µs
10
0
1m
µ
s
10
s
ms
Drain Current, ID -- A
--3.0
--2.5
--2.0
--1.5
--1.0
--0.5
0
0
1
2
3
4
5
3
2
ID=
--3A
DC
--1.0
7
5
3
2
op
e
rat
--0.1
7
5
3
2
Operation in this area
is limited by RDS(on).
10
0m
ion
s
(T
a=
2
5
°
C)
Total Gate Charge, Qg -- nC
1.2
PD -- Ta
IT13016
--0.01
--0.01
Ta=25°C
Single pulse
Mounted on a ceramic board (900mm
2
½0.8mm)
2
3
Drain-to-Source Voltage, VDS
5 7 --0.1
2 3
5 7 --1.0
2
3
5 7 --10
2 3
-- V
IT13017
Allowable Power Dissipation, PD -- W
1.0
M
0.8
ou
nt
ed
on
0.6
ac
er
am
ic
b
oa
rd
0.4
(9
00
m
m
2
½
0.2
0
0.
8m
m
)
140
160
0
20
Ambient Temperature, Ta --
°C
40
60
80
100
120
IT13018
No. A0957-4/5
MCH3377
Outline Drawing
MCH3377-TL-E, MCH3377-TL-H, MCH3377-TL-W
Mass (g) Unit
0.007 mm
* For reference
Land Pattern Example
Unit: mm
0.4
0.6
2.1
0.65 0.65
Note on usage : Since the MCH3377 is a MOSFET product, please avoid using this device in the vicinity of
highly charged objects.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
[table=98%] [tr][td]Please help me look at this diagram. I have been looking at it for two or three days, but I still can't fully understand it. This schematic diagram is only a part of it. The whole ...
For decades, the electronics and technology industries have relied on silicon as the main semiconductor chips used in their production. But lately, this chip has been scarce because its demand has bec...
In KEIL5, can the comment statement be written in the IF judgment condition in C language, as shown in the red font below? Thank youif ((A=2)// Comment 1(B!=0)(C!=5 ))D=1;...
[b][size=4]How to deal with the error of calling ti.osal.ae674 library when porting the FATFS routine of pdk_omapl138? [/size][/b][size=4][/size] [align=left][color=rgb(85, 85, 85)][size=4]The error i...
I need to use SPI3, PB3, PB4, PB5, but the manual shows that after reset the main function of PB3 is JTDO and PB4 is NJTRST.
Does that mean that you need to block this function with code before using ...
Source: Feixiang.comOn October 11, news that ZTE's self-developed 7-nanometer chip had been commercially available attracted outside attention.
According to media reports, ZTE Vice President Li Hui re...
Resonant LC sensor technology has been used for motion detection for several years, including flow metering and other low-speed rotation detection systems. In almost all cases, the common thread drivi...[Details]
Recently, Huawei disclosed the patent for "A fingerprint anti-counterfeiting method and electronic device", with publication number CN112989888A. The patent abstract shows that the fingerprint ant...[Details]
LED lamp beads are already a very familiar productin the LED industry, but many people don’t know much about the price of LED lamp beads. What is the reason for the huge difference in the price o...[Details]
Flyback converters are popular because of their low cost, isolation, and the ease with which more output voltages can be implemented. For multiple output flybacks, one output voltage (generally the h...[Details]
1. Naming method of integrated circuits in my country
According to the provisions of the national standard GB3430, the model of the integrated circuit consists of the following five parts:...[Details]
Recently, according to CCTV Finance, with the rise in my country's labor costs, more and more labor-intensive enterprises have begun to relocate their factories to other countries, which has also pro...[Details]
Linear Technology Corporation introduces the LTC3863, a high voltage negative output DC/DC controller that generates a negative voltage from a positive input voltage using only a single inductor. M...[Details]
On December 19, State Grid Blockchain Company organized the first Energy Blockchain Ecosystem Conference and released the top ten application scenarios of State Grid blockchain technology and the "...[Details]
As a disruptive innovation in the field of modern transportation, autonomous driving
technology has become a strategic focus for global automakers and technology companies. The core of autono...[Details]
1 Introduction With the rapid development of computer technology, the hardware components used in computer systems are basically large-scale and ultra-large-scale integrated circuits. The design, ver...[Details]
After analyzing the regional distribution sales data of new energy vehicles from January to July 2021, I came to some interesting conclusions for your reference.
I. Key Areas
(1) Pl...[Details]
Car Connectivity
In the future, as more and more cars use autonomous driving technology, a car will have the ability to "communicate" with other cars and infrastructure such as traffic lights t...[Details]
The 3390 is a flexible, simple and easy-to-use programmable signal generator with advanced function, pulse and arbitrary waveform generation capabilities. The 3390 combines excellent signal integrati...[Details]
The vortex flowmeter can only measure in one direction. When installing, make sure that the flow direction of the medium is consistent with the direction indicated by the arrow on the flowmeter. 2. T...[Details]
There are many places in C/C++ language where extern is used. However, if you don't really understand its meaning, it will cause great trouble to programming. In order to help you avoid detours, we w...[Details]
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
