Film Capacitors
Metallized Polyester Film Capacitors (MKT)
Series/Type:
Date:
B32231
May 2009
The following products presented in this data sheet are being withdrawn.
Ordering Code
B32231D1334K000
B32231D1334J000
B32231D1154K000
Substitute Product
Date of
Withdrawal
2012-08-24
2012-08-24
2012-08-24
Deadline Last
Orders
2012-11-30
2012-11-30
2012-11-30
Last Shipments
2013-02-28
2013-02-28
2013-02-28
© EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Ordering Code
B32231D6224J000
B32231D6154K000
B32231D6154J000
B32231D6104K000
B32231D6104J000
B32231D3684K000
B32231D3684J000
B32231D3474K000
B32231D3474J000
B32231D3334K000
B32231D3334J000
B32231D3225K000
B32231D3225J000
B32231D3224K000
B32231D3224J000
Substitute Product
Date of
Withdrawal
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
2012-08-24
Deadline Last
Orders
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
2012-11-30
Last Shipments
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
2013-02-28
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
Metallized polyester film capacitors (MKT)
General purpose (wound)
B32231
Typical applications
Smoothing
Filtering
Climatic
Max. operating temperature: 100
°C
Climatic category (IEC 60068-1): 40/100/21
Construction
Dielectric: polyethylene terephthalate
(polyester, PET)
Flat winding
Insulating sleeve
Face ends sealed with epoxy resin
Terminals
Central axial wire leads, lead-free tinned
Marking
Manufacturer, series number,
rated capacitance (coded),
capacitance tolerance (code letter),
rated DC voltage, date of manufacture (coded)
Delivery mode
Bulk (untaped)
Dimensional drawing
Dimensions in mm
Width w
max
Lead diameter d
1
≤6.0
0.6
>6.0 ... 13.0
0.8
When bending leads take care to leave a
clearance of 1 mm to the capacitor body.
Please read
Cautions and warnings
and
Important notes
at the end of this document.
Page 2 of 19