measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range
Output Voltage Accuracy
Line Regulation
Load Regulation
Input Surge
REC3.5-S_DRW
/R* Series
2:1
±2% max.
±0.3% max.
±0.6% max.
16V max.
25V max.
50V max.
100V max.
3.5V typ. (±20%)
7V typ. (±20%)
15V typ. (±10%)
32V typ. (±10%)
150mVp-p max.
1ms typ.
150kHz min. / 500kHz max.
Pi Network
MLCC capacitors only
20% Full Load
400mW max.
8000VDC
4000VAC / 60Hz
10000VDC.
5000VAC / 60Hz
20pF typ.
10 GΩ min.
Continuous, Auto Restart
-40°C to +85°C (see Graph)
105°C max.
-55°C to +125°C
95% RH
Non-Conductive Plastic
Silicone
20°C/W
14g
15 pcs per Tube
1206 x 10
3
hours
392x 10
3
hours
Class A
Class A
4.6 mm min.
2.4 mm min.
6.0 mm min.
6.0 mm min.
14.2 mm min.
EN 60601-1 3rd Edition
Undervoltage Lockout
Output Ripple and Noise
Transient Response
Switching Frequency
Input Filter
Capacitors
All types
Mimimum Load
(Operation under no load will not damage the converter, but it may not meet all specifications)
No Load Power Consumption
Isolation Voltage
R8-Suffix
(tested for 1 second)
(rated for 1 minute**)
Isolation Voltage
R10-Suffix
(tested for 1 second)
(rated for 1 minute**)
Isolation Capacitance
Isolation Resistance
Short Circuit Protection
(Max operating temp. = 60°C during short circuit conditions)
Operating Temperature Range
(free air convection)
Case Temperature
Storage Temperature Range
Relative Humidity
Case Material
Potting Material
Thermal Impedance
Natural convection
Package Weight
Packing Quantity
MTBF (+25°C)
using MIL-HDBK 217F
Detailed Information see
Application Notes chapter "MTBF"
(+75°C)
using MIL-HDBK 217F
EMC
Conducted Emissions
EN55022
(with 470µF//0.1µF capacitors across input) Radiated Emissions
EN55022
Reinforced Isolation
Transformer Creepage
/R8 and /R10 Types
Transformer Clearance
/R8 and /R10 Types
PCB Creepage & Clearance
/R8 and /R10 Types
Optocoupler Creepage
/R8 and /R10 Types
External Creepage and Clearance
Plastic Case
Input <> Output pins
Certifications
EN Medical Safety
Report: MDD1207051 + RM1207051
Medical Report + ISO14971 Risk Assessment
IEC Medical Safety
CB Report: CA-10168-A1-UL
IEC 60601-1 3rd Edition
CSA
Medical Safety
Report: 2202478
C22.2 601-1 2nd Ed.
UL
Medical Safety
E314885-A4
UL 60601-1 3rd Edition
General Safety
Report: 2219431
C22.2 No. 60950-1-03
UL 60950-1 1st Ed.
Recognised as Reinforced Isolation
Supplement to Report: 2219431
(HL-LL)
(for output load current change from 20% to 100%)
(1 minute)
5V types
12V types
24V types
48V types
(/X1 Versions)
5V types
12V types
24V types
48V types
(0,1µF capacitor on output, 20MHz BW limited)
(25% step change)
(Full load and nominal input voltage)
REC3.5/R
}
**Any data referred to in this datasheet are of indivative nature and based on our practical experience only. For further details, please refer to our Application Notes.
The product information and specifications are subject to change without prior notice. All products are designed for non-safety critical commercial and industrial applications.
The Buyer agrees to implement safeguards that anticipate the consequences of any failures that might cause harm, loss of life and/or damage property.
E-150
REV: 1/2014
www.recom-power.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
There are many high-frequency ultrasonic sensors for sale on the Internet, but they do not have the relevant sensor processing circuits.
How can we design this kind of circuit? The sensor doesn’t seem...
Introducing a national invention patent - a smart water meter with one card. The patent was applied by Zhengzhou Leyuan Electronic Technology Co., Ltd. and was authorized on January 9, 2018.Contents
T...
There are generally two reasons for oscilloscope waveform jitter. One is that the signal is not synchronized, which is a problem with the oscilloscope trigger setting. The other is that the signal its...
Signal integrity is the main criterion for measuring signal quality with an oscilloscope, especially when we need to observe small signals or slight changes in large signals, signal integrity becomes ...
I have seen similar millimeter wave human body sensing modules on Taobao before. The cheapest one is only a dozen yuan.
I didn't find any information about this XenD101 module, but I guess it won't be...
With the increase in speed of Bluetooth®5, do you also want to seize the opportunity and be one step ahead? Now, engineers can easily support high-speed mode with TI's first fully certified Bluetooth...[Details]
Speed sensors are widely used in automobiles. They are needed in the control systems of automobile engines, chassis, and body. There are four main types of speed sensors: vehicle speed sensors, whe...[Details]
Design requirements: The 8-bit 8-terminal digital tube dynamically displays 76543210. When displayed quickly, the effect seen by the human eye is that they light up at the same time. ————————————————...[Details]
According to foreign media reports, Silicon Valley startup Recogni announced that it has raised $25 million (about 170 million yuan) in Series A financing, which was led by GreatPoint Ventures, BMW i...[Details]
The 2016 Beijing International Auto Show has not yet cooled down. It not only brought us a visual feast of car exterior design, but also, as usual, major car companies competed in the field of techno...[Details]
Preface: Digital multimeter is a relatively simple measuring instrument. In this article, the author will teach you how to use a digital multimeter correctly. Starting from the measurement methods ...[Details]
In recent years, a kind of audiophile-level
amplifier circuit printed circuit
board has appeared on the market - the American Electric TA-1500. Many audiophile enthusiasts have tried to a...[Details]
Microcontrollers have been widely used in many modern electronic designs and productions, but there are still many inconveniences in the communication between microcontrollers. Common ones include ...[Details]
01 Determine whether the line or device is live or not The digital AC voltage barrier is very sensitive and can be displayed even if there is a small induced voltage around it. According to this feat...[Details]
Today’s cars are at the crossroads of becoming completely electronic, minimizing the use of mechanical systems and becoming the largest and most expensive “digital tool” in people’s lives. The drivi...[Details]
TI closes the gap between high speed and accuracy with new SAR ADC family, including industry's fastest 18-bit ADC
Engineers can design high-speed digital control loops with ultra-high dynamic...[Details]
Panel research institutions have predicted the future market share of OLED and pointed out that BOE will be the largest panel manufacturer in the future. Panel research firm Display Supply Chain Co...[Details]
In the future, self-driving cars will mainly rely on three types of on-board sensors: cameras, radars, and lidars. However, according to foreign media reports, Israeli startup AdaSky hopes to use the...[Details]
On the surface, the development of smartphones has a certain promoting effect on car infotainment systems. When people are used to poking at the screens of their mobile phones, they will also be u...[Details]
Huang, speaking at market research and advisory firm Gartner's IT Symposium/Xpo event in Orlando on Tuesday, argued that CEOs and CIOs must start using AI early and that changes will happen natural...[Details]
Sensor
京公网安备 11010802033920号
EEWORLD
