HCPL-4504/J454/0454, HCNW4504
High CMR, High Speed Optocouplers
Data Sheet
Description
The HCPL-4504 and HCPL-0454 contain a GaAsP
LED while the HCPL-J454 and HCNW4504 contain an
AlGaAs LED. The LED is optically coupled to an
integrated high gain photo detector.
The HCPL-4504 series has short propagation delays
and high CTR. The HCPL-4504 series also has a
guaranteed propagation delay difference (t
PLH
-t
PHL
).
These features make the HCPL-4504 series an excellent
solution to IPM inverter dead time and other switching
problems. The CTR, propagation delay, and CMR are
specified both for TTL and IPM conditions which are
provided for ease of application. These single channel,
diode-transistor optocouplers are available in 8-Pin
DIP, SO-8, and Widebody package configurations. An
insulating layer between a LED and an integrated
photodetector provide electrical insulation between
input and output. Separate connections for the
photodiode bias and output-transistor collector increase
the speed up to a hundred times that of a conventional
phototransistor coupler by reducing the base collector
capacitance.
Functional Diagram
Features
• Short propagation delays for TTL and IPM applications
• 15 kV/µs minimum Common Mode Transient immunity at
V
CM
= 1500 V for TTL/load drive
• High CTR at T
A
= 25°C
>25% for HCPL-4504/0454
>23% for HCNW4504
>19% for HCPL-J454
• Electrical specifications for common IPM applications
• TTL compatible
• Guaranteed performance from 0°C to 70°C
• Open collector output
• Safety approval:
UL recognized
– 3750 V rms / 1min. for HCPL-4504/0454/J454
– 5000 V rms / 1min. for HCPL-4504 Option 020 and
HCNW4504
CSA approved
IEC/EN/DIN EN 60747-5-2 approved
– V
IORM
= 560 Vpeak for HCPL-0454 Option 060
– V
IORM
= 630 Vpeak for HCPL-4504 Option 060
– V
IORM
= 891 Vpeak for HCPL-J454
– V
IORM
= 1414 Vpeak for HCNW4504
Applications
• Inverter circuits and Intelligent Power Module (IPM)
interfacing:
High Common Mode Transient immunity (> 10 kV/µs for an
IPM load/drive) and (t
PLH
- t
PHL
) Specified (see Power
Inverter Dead Time section)
• Line receivers:
Short propagation delays and low input-output capacitance
• High speed logic ground isolation:
TTL/TTL, TTL/CMOS, TTL/LSTTL
• Replaces pulse transformers:
Save board space and weight
• Analog signal ground isolation:
Integrated photodetector provides improved linearity over
phototransistors
NC 1
ANODE 2
CATHODE 3
NC 4
8 V
CC
7 NC
6 V
O
5 GND
TRUTH TABLE
LED
V
O
LOW
ON
HIGH
OFF
A 0.1
µF
bypass capacitor between
pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
Ordering Information
HCPL-0454, HCPL-4504 and HCPL-J454 are UL Recognized with 3750 Vrms for 1 minute per UL1577.
HCNW4504 is UL Recognized with 5000 Vrms for 1 minute per UL1577. HCPL-0454, HCPL-4504,
HCPL-J454 and HCNW4504 are approved under CSA Component Acceptance Notice #5, File CA 88324.
Option
Part
RoHS
non RoHS
Number
Compliant Compliant
-000E
no option
-300E
#300
-500E
#500
-020E
#020
HCPL-4504 -320E
#320
-520E
#520
-060E
#060
-360E
#360
-560E
#560
-000E
no option
HCPL-J454 -300E
#300
-500E
#500
-000E
no option
HCPL-0454 -500E
#500
-060E
#060
-560E
#560
-000E
no option
HCNW4504 -300E
#300
-500E
#500
Package
300 mil DIP-8
Surface
Mount
X
X
X
X
X
X
Gull
Wing
X
X
X
X
X
X
X
X
Tape
& Reel
UL 5000 Vrms/
1 Minute rating
X
X
X
X
X
X
300 mil DIP-8
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SO-8
400 mil
Widebody
DIP-8
X
IEC/EN/DIN
EN 60747-5-2 Quantity
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
X
50 per tube
X
50 per tube
X
1000 per reel
X
50 per tube
X
50 per tube
X
1000 per reel
100 per tube
1500 per reel
X
100 per tube
X
1500 per reel
X
42 per tube
X
42 per tube
X
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the
option column to form an order entry.
Example 1:
HCPL-4504-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel
packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant.
Example 2:
HCPL-4504 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for
information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15,
2001 and RoHS compliant will use ‘–XXXE.’
3
Package Outline Drawings
HCPL-4504 Outline Drawing
9.65 ± 0.25
(0.380 ± 0.010)
TYPE NUMBER
8
7
6
5
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
OPTION CODE*
DATE CODE
A XXXXZ
YYWW RU
1
1.19 (0.047) MAX.
2
3
4
UL
RECOGNITION
1.78 (0.070) MAX.
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
5° TYP.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
* MARKING CODE LETTER FOR OPTION NUMBERS
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
HCPL-4504 Gull Wing Surface Mount Option 300 Outline Drawing
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
8
7
6
5
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1
2
3
4
1.27 (0.050)
2.0 (0.080)
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
3.56 ± 0.13
(0.140 ± 0.005)
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.130
2.54
(0.025 ± 0.005)
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.25
(0.025 ± 0.010)
12° NOM.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
4
Package Outline Drawings
HCPL-J454 Outline Drawing
9.80 ± 0.25
(0.386 ± 0.010)
TYPE NUMBER
8
7
6
5
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
OPTION CODE*
DATE CODE
A XXXXZ
YYWW RU
1
1.19 (0.047) MAX.
2
3
4
UL
RECOGNITION
1.78 (0.070) MAX.
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
5° TYP.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
* MARKING CODE LETTER FOR OPTION NUMBERS
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.5 mm (20 mils) MAX.
HCPL-J454 Gull Wing Surface Mount Option 300 Outline Drawing
LAND PATTERN RECOMMENDATION
9.80 ± 0.25
(0.386 ± 0.010)
8
7
6
5
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1
2
3
4
1.27 (0.050)
2.0 (0.080)
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
3.56 ± 0.13
(0.140 ± 0.005)
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.130
2.54
(0.025 ± 0.005)
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.25
(0.025 ± 0.010)
12° NOM.
NOTE: FLOATING LEAD PROTRUSION IS 0.5 mm (20 mils) MAX.
5