85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Original link : https://blog.csdn.net/wtf3505/article/details/104138727
Refer to the solution on the Internet, first download the original device driver, and then install the old driver below...
UWB (UltraWideband) technology is used to determine the location, movement and distance of devices due to its highly accurate, low power consumption, powerful and secure characteristics. Therefore, UW...
Use the best-in-class LNA with the lowest noise in your design.
When designing a system, consider the true nominal temperature of the application.
Isolate external noise or prevent it from affecting t...
[i=s]This post was last edited by viphotman on 2019-6-27 17:52[/i]I have known CH340 for a long time, but this is the first time I have come into contact with Qinheng's MCU;
Once unpacked
I don't know...
What do you think of Tesla's production of the first version of the Optimus Prime robot in 2023? Musk: Optimus Prime will eventually be able to do anything that humans don't want to do? What's so good...
In our circuit design, we often encounter the problem of communication level conversion. Before applying the level conversion measures, we also need to determine the necessity of level conversion.If y...
vivo NEX 3 will be released next month. New features of the phone have been revealed. The general manager of vivo product line @栾心林Lance confirmed on Weibo that vivo NEX 3 will not have physical butt...[Details]
A research team from the University of Bologna and CINECA (Italy's largest supercomputing center) has been researching and developing RISC-V supercomputers. Recently, the new ISA designed by the team...[Details]
Recently, Microsoft announced a partnership with Delta and will jointly carry out digital transformation in the future. The cooperation includes: Delta's introduction of Microsoft Azure hybrid clou...[Details]
The MAX5035 is an easy-to-use, high-efficiency, high-voltage, step-down DC-DC converter that operates from input voltages up to 76V and consumes only 270µA of quiescent current at no load. This pul...[Details]
Nanda Optoelectronics revealed on the interactive platform that the company has set up a photoresist division and established a wholly-owned subsidiary, Ningbo Nanda Optoelectronic Materials Co., Ltd...[Details]
Introduction: Digital oscilloscopes are high-performance oscilloscopes made with a series of technologies such as data acquisition, A/D conversion, and software programming. Digital oscilloscopes g...[Details]
Today, Lu Weibing, general manager of the Redmi brand, continued to reveal information about the Redmi 9 which will be released tomorrow. First of all, in terms of performance, the Redmi 9 is equippe...[Details]
Power supply is often the most easily overlooked link in the circuit design process. In fact, as an excellent design, power supply design should be very important, which greatly affects the per...[Details]
Adding analog chips is a bridge between the real world and the digital world. The sound, light, and other signals in the real world are continuous in time and amplitude. This signal is called an anal...[Details]
In addition to 5G networks, AI and other technologies, cars themselves are also new infrastructure. In view of the urgent need for urban governance and the new development of the automotive indu...[Details]
Previously, some media exposed Sony's new TWS headset LinkBuds S and revealed the appearance details. Recently, foreign media winfuture further exposed the detailed parameters of this headset...[Details]
As we all know, Tencent is the Chinese agent of Nintendo Switch, which was released in China on December 4, 2019. The Qichacha App shows that Tencent Technology (Shenzhen) Co., Ltd. obtained...[Details]
1: Write and compile to generate .hex file #include reg52.h sbit led = P0^0; //Connect the light-emitting diode to pin 0 of P0 void main() { led = 0; //The circuit connection method is: set the...[Details]
Recently, at RE+, the largest clean energy exhibition in North America, Haibosic has reached a breakthrough cooperation with a number of global partners including energy storage system integrators,...[Details]
Making friends through disassembly
京公网安备 11010802033920号
EEWORLD
