PATT
www.vishay.com
Vishay Dale Thin Film
Precision Automotive High Temperature (155 °C at Full
Rated Power) Thin Film Chip Resistor, AEC-Q200 Qualified
FEATURES
• Resistance range: 1.0
Ω
to 1 MΩ
• AEC-Q200 qualified, table 7F
• AEC-Q200 qualified, ESD rated class 1C
(< 1 kΩ: 1 kV; > 1 kΩ: 2 kV)
• Laser trimmed to any value
• Intrinsic moisture protected resistor element
• Moisture resistant to MIL-STD-202, method 106
LINKS TO ADDITIONAL RESOURCES
Infographics
The terminations consist of an adhesion layer, a leach
resistant nickel barrier and gold plating compatible with high
temperature solder systems.
CONSTRUCTION
Passivation
Tantalum Nitride
Resistive Film
Gold
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
Tantalum nitride resistor film on alumina substrate
100 % visual inspected per MIL-PRF-55342
Laser-trimmed tolerances to ± 0.1 %
Load life stability 0.2 % at 1000 h at 155 °C and 100 %
rated power
• Very low noise and voltage coefficient
(< -30 dB, < 0.1 ppm/V)
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
•
•
•
•
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
25
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
(1)
Noise
Shelf Life Stability: Absolute
Note
(1)
Storage temperature rating is for device only
SPECIFICATIONS
Tantalum nitride
1.0
Ω
to 1 MΩ
± 25 ppm/°C to ± 100 ppm/°C
± 0.1 % to ± 1.0 %
± 0.2 %
Not applicable
Less than 0.1 ppm/V
75 V
-55 °C to +250 °C
-55 °C to +250 °C
< -30 dB
100 ppm
CONDITIONS
-
-
-55 °C to +175 °C
+25 °C
1000 h at 155 °C and 100 % rated power
-
-
-
-
-
-
1 year at 25 °C
COMPONENT RATINGS
CASE SIZE
0402
0603
0805
1206
Revision: 08-Mar-2021
POWER RATING (mW)
50
150
200
400
WORKING VOLTAGE (V)
75
75
100
200
RESISTANCE RANGE (Ω)
1.5 to 51K
2.75 to 120K
2.75 to 301K
1.0 to 1M
Document Number: 60124
1
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
PATT
www.vishay.com
DIMENSIONS
in inches
D
T
D
W
E
L
L
T
Vishay Dale Thin Film
CASE SIZE
0402
0603
0805
1206
L
0.042 ± 0.008
0.064 ± 0.006
0.080 ± 0.006
0.126 ± 0.008
W
0.022 ± 0.005
0.032 ± 0.005
0.050 ± 0.005
0.063 ± 0.005
T
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
D
0.010 ± 0.005
0.012 ± 0.005
0.016 ± 0.008
0.020 + 0.005 / - 0.01
E
0.010 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.020 + 0.005 / -0.01
ENVIRONMENTAL TESTS
ENVIRONMENTAL TEST
High temperature storage
Temperature cycling
Moisture resistance
Biased humidity
Life
Mechanical shock
Vibration
Resistance to soldering heat
Electrostatic discharge
Solderability
Die shear
Flame retardance
CONDITIONS
MIL-STD-202 method 108, 1000 h at 125 °C
JESD22 method JA-104, 1000 cycles,
-55 °C to +155 °C
MIL-STD-202 method 106
MIL-STD-202 method 103, 1000 h at 85 °C, 85 % RH,
10 % rated power
MIL-STD-202 method 108,
1000 h at 155 °C
MIL-STD-202 method 213, condition C
MIL-STD-202 method 204, 10 Hz to 2 kHz
MIL-STD-202 method 210, condition B
AEC-Q200-002, human body
(< 1 kΩ: 1 kV; > 1 kΩ: 2 kV)
MIL-STD-883 method 2003 para 2.3.1 and J-STD-002
MIL-PRF-55342
AEC-Q200-001 para 4.0
TYPICAL VISHAY PERFORMANCE
± 0.05 %
± 0.115 %
± 0.017 %
± 0.133 %
± 0.20 % at 100 % rated power and 155 °C.
Effective film temperature is 200 °C.
± 0.008 %
± 0.008 %
± 0.09 %
± 0.10 % at 2 kV
Pass
Pass
Pass
MECHANICAL SPECIFICATIONS
Resistive element
Substrate material
Terminations
Tantalum nitride
Alumina
Gold (10 μin. min.) over nickel (50 μin. min.)
DERATING CURVE
Axis Title
100
10000
80
2nd line
Rated Power (%)
1000
1st line
2nd line
100
20
10
-55
0
50
100
155
200
250
Ambient Temperature (°C)
60
40
0
Revision: 08-Mar-2021
Document Number: 60124
2
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
PATT
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PATT0603E1002BGT1
P
GLOBAL
MODEL
PATT
A
CASE
SIZE
0402
0603
0805
1206
T
T
0
6
0
3
E
1
0
0
2
B
G
T
1
TCR
CHARACTERISTIC
E
= ± 25 ppm/°C
H
= ± 50 ppm/°C
K
= ± 100 ppm/°C
(1)
L
= ± 200 ppm/°C
RESISTANCE
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros
to follow. “R”
designates the
decimal point.
Example:
10R0 = 10
Ω
1000 = 100
Ω
1002 = 10 kΩ
TOLERANCE
B
= ± 0.1 %
D
= ± 0.5 %
F
= ± 1.0 %
G
= ± 2.0 %
J
= ± 5.0 %
TERMINATION
G
= wraparound
gold over nickel
barrier
PACKAGING
BULK
BS
= 100 min., 1 mult.
WAFFLE
WS
= 100 min., 1 mult.
W0
= 100 min.,100 mult.
WI
= 100 min.,1 mult.
(item single lot date code)
WP
= 100 min.,1 mult.
(package unit single lot
date code)
TAPE AND REEL
T0
= 100 min., 100 mult.
T1
= 1000 min., 1000 mult.
T3
= 300 min., 300 mult.
T5
= 500 min., 500 mult.
TF
= full reel
TS
= 100 min., 1 mult.
TI
= 100 min., 1 mult.
(item single lot date code)
TP
= 100 min., 1 mult.
(package unit single lot
date code)
Note
(1)
Characteristic TCR - (R < 10
Ω)
TCR
(ppm/°C)
25, 50, 100, 200
100, 200
200
TOLERANCE
(%)
0.1, 0.5, 1, 2, 5
1, 2, 5
1, 2, 5
RESISTANCE
10
Ω
to 1 MΩ
5
Ω
to 10
Ω
(1)
1.0
Ω
to 5
Ω
(1)
Note
(1)
Resistance values from 1.0
Ω
to 10
Ω
are undergoing PPAP qualification; results are expected to be similar to PPAP qualified 10
Ω
to 120 kΩ
Revision: 08-Mar-2021
Document Number: 60124
3
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
1
Document Number: 91000
Suggestions & Announcements
京公网安备 11010802033920号
EEWORLD
