MEMS Oscillator, Ultra Performance, High Freq., LVCMOS/ HCMOS Compatible, 80.0 MHz to 220.0MHz
IM811 Series
Features:
MEMS Technology
Direct pin to pin drop-in replacement for industry-standard packages
Ultra-low phase jitter: 0.5 pSec (12 kHz to 20 MHz)
LVCMOS/HCMOS Compatible Output
Industry-standard package 2.5 x 2.0, 3.2 x 2.5, and 5.0 x 3.2 mm x mm
Pb-free, RoHS and REACH compliant
Fast delivery times
Typical Applications:
Fibre Channel
Server and Storage
GPON, EPON
100M / 1G /10G Ethernet
Electrical Specifications:
Frequency Range
Frequency Stability
Operating Temperature
Supply Voltage (Vdd) ±10%
Current Consumption
OE Disable Current
Standby Current
Waveform Output
Symmetry
Rise / Fall Time
Logic “1”
Logic “0”
Input Voltage High
Input Voltage Low
Input Pull-up Impedance
Startup Time
OE Enable/Disable Time
Resume Time
RMS Period Jitter
RMS Phase Jitter (random)
First year Aging
10-years Aging
80.000 MHz to 220.000MHz
See Part Number Guide
See Part Number Guide
See Part Number Guide
34 mA typ./ 36 mA max
30 mA typ./ 33 mA max
31 mA max
30 mA max
70 µA max
10 µA max
LVCMOS/HCMOS
45%/55%
40%/60%
1.2 nSec typ./ 2.0 nSec max
90% of Vdd min
10% of Vdd max
70% of Vdd min
30% of Vdd max
100 kΩ typ./ 250 kΩ max
2.0 MΩ min
7 mSec typ./ 10 mSec max
115 nSec max
10 mSec max
1.5 pSec typ./ 2.0 pSec max
2.0 pSec typ./ 3.0 pSec max
0.5 pSec typ./ 1.0 pSec max
±1.5 ppm
±5.0 ppm
Inclusive of Initial Tolerance, Operating Temperature Range, Load, and
Voltage
No load condition, f = 100 MHz, Vdd = +2.5 V, +2.8 V or +3.3 V
No load condition, f = 100 MHz, Vdd = +1.8V
Vdd = +2.5 V, +2.8 V or +3.3 V, OE = GND
Vdd = +1.8 V, OE = GND
Vdd = +2.5 V, +2.8 V or +3.3 V,
ST
= GND
Vdd = +1.8 V,
ST
= GND
F = less than 165 MHz all Vdds
F = greater than 165 MHz all Vdds
15 pF Load, 10% to 90% of Vdd
Pin 1, OE or
ST
Pin 1, OE or
ST
Pin 1, OE logic high or logic low, or
ST
logic high
Pin 1,
ST
logic low
Measured from the time Vdd reaches its rated minimum values
F= 80 MHz, For other frequencies, T_oe = 100 nSec = 3 cycles
In standby mode, measured from the time
ST
pin crosses 50% threshold.
F = 156.25 MHz, Vdd = +2.5 V,+2.8 V or +3.3 V
F = 156.25 MHz, Vdd = +1.8 V
F = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz
At +25ºC ±2ºC
At +25ºC ±2ºC
Notes:
All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.
Typical values are at +25ºC and nominal supply voltage.
Absolute Maximum Limits
Storage Temperature
Supply Voltage (Vdd)
Electrostatic Discharge
Solder Temperature (follow standard Pb free soldering guidelines)
Junction Temperature
-65ºC to +150ºC
-0.5 VDC to 4.0 VDC
2000 V max
260ºC max
150ºC max
ILSI America Phone 775-851-8880
●
Fax 775-851-8882
●email:
e-mail@ilsiamerica.com
●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 01/30/16_A
Page 1 of 7
MEMS Oscillator, Ultra Performance, High Freq., LVCMOS/ HCMOS Compatible, 80.0 MHz to 220.0MHz
IM811 Series
Ordering Information:
Part Number Guide
Packages
IM811B – 5.0 x 3.2
IM811C – 3.2 x 2.5
IM811D – 2.5 x 2.0
Input Voltage
1 = +1.8 V
6 = +2.5 V
2 = +2.7 V
7 = +3.0 V
3 = +3.3 V
Operating
Temperature
1 = 0ºC to +70ºC
2 = -40ºC to +85ºC
3 = -20ºC to +70ºC
Output Drive
Strength
-
= Default
Stability
(ppm)
E = ±10
F = ±20
A = ±25
B = ±50
Select Function
H = Tri-state
S = Standby
-
Frequency
Frequency
Sample Part Number:
IM811C-31-FS-100.0000MHz
This 100.0000 MHz oscillator in a 3.2 x 2.5 package with stability ±20 ppm from 0ºC to +70ºC using a supply voltage of +3.3 V. With Pin 1 function as
Standby. Output Drive Strength is only set to the default level.
Sample Part Number:
IM811D-13-AH-125.0000MHz
This 125.0000 MHz oscillator in a 2.5 x 2.0 package with stability ±25 ppm from -20ºC to +70ºC using a supply voltage of +1.8 V. With Pin 1 function as
Tri-state. Output Drive Strength is only set to the default level.
Notes:
Not all options are available at all frequencies and temperatures ranges.
Please consult with sales department for any other parameters or options.
Oscillator specification subject to change without notice.
Phase Noise:
Figure 1: Phase Noise, 156.25 MHz, +3.3 V LVCMOS Output
ILSI America Phone 775-851-8880
●
Fax 775-851-8882
●email:
e-mail@ilsiamerica.com
●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 01/30/16_A
Page 2 of 7
MEMS Oscillator, Ultra Performance, High Freq., LVCMOS/ HCMOS Compatible, 80.0 MHz to 220.0MHz
IM811 Series
Performance Plots
Figure 2: Idd vs Frequency
Figure 3: RMS Period vs Frequency
Figure 4: Duty Cycle vs Frequency
Figure 5: RMS Phase Jitter vs Frequency
Figure 6: Idd vs Temperature, 100 MHz Output
Figure 7: Rise Time vs Temperature, 100 MHz Output
Note:
All plots are measured with 15pF load at room temperature, unless otherwise stated.
ILSI America Phone 775-851-8880
●
Fax 775-851-8882
●email:
e-mail@ilsiamerica.com
●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 01/30/16_A
Page 3 of 7
MEMS Oscillator, Ultra Performance, High Freq., LVCMOS/ HCMOS Compatible, 80.0 MHz to 220.0MHz
IM811 Series
Test Circuit
Waveform
Environmental Specifications:
Environmental Compliance
Parameter
Mechanical Shock
Mechanical Vibration
Temperature Cycle
Solderability
Moisture Sensitivity Level
Condition/Test Method
MIL-STD-883F, Method 2002
MIL-STD-883F, Method 2007
JESD22, Method A104
MIL-STD-883F, Method 2003
MSL Level 1 at +260ºC
Pb Free Solder Reflow Profile
Ts max to T
L
(Ramp-up Rate)
Preheat
Temperature min (Ts min)
Temperature typ (Ts typ)
Temperature max (Ts max)
Time (Ts)
Ramp-up Tate (T
L
to Tp
Time Maintained Above
Temperature (T
L
)
Time (T
L)
Peak Temperature (Tp)
Time within 5ºC to Peak
Temperature (Tp)
Ramp-down Rate
Tune 25ºC to Peak
Temperature
Moisture Sensitivity Level
(MSL)
3ºC / second max
150ºC
175ºC
200ºC
60 to180 seconds
3ºC / second max
217ºC
60 to 150 seconds
260ºC max for seconds
20 to 40 seconds
6ºC / second max
8 minute max
Level 1
Units are backward compatible with +240ºC reflow processes
ILSI America Phone 775-851-8880
●
Fax 775-851-8882
●email:
e-mail@ilsiamerica.com
●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 01/30/16_A
Page 4 of 7
MEMS Oscillator, Ultra Performance, High Freq., LVCMOS/ HCMOS Compatible, 80.0 MHz to 220.0MHz
IM811 Series
Pin Functionally
Pin
Symbol
OE
1
ST
Standby
Tri-state
Pin Description
Functionality
High or Open = specified frequency output
Low = Output is high impedance, only output is disabled.
High or Open = specified frequency output.
Low = Output is low. Device goes to sleep mode. Supply current
reduces to standby current.
Electrical ground
Oscillator output
Power supply voltage
Pin Assignments
OE
1
ST
Top View
4
Vdd
2
GND
Power
3
Out
Output
4
Vdd
Power
Notes:
1. In OE or
ST
mode, a pull-up resistor of 10.0 kΩ or less is recommended if Pin 1 is not externally
driven
2. A capacitor of value 0.1 µF or higher between Pin 4 (Vdd) and Pin 1 (GND) is required.
The hardware white-boxization of O-RAN needs to go through five stages, and this article focuses on the third stage.
Phase 1: Based on general-purpose computer hardware
Phase 2: Dedicated daughter car...
I originally raised the message box at the bottom to see the warning message, but I tried many times to adjust it back but failed. Sometimes it didn't respond, and sometimes the window was separated. ...
In the automotive, watch and other industries, some parts are special-shaped parts and delicate and easily damaged parts . In order not to damage their surfaces , flexible production is required . Bec...
Briefly summarize the definition of firmware, burning, and several methods of burning process.
1. What is burning (downloading) and firmware
Embedded systems need to write programs into ROM/FLASH in a...
I have a question. When charging, the power level will jump when it is more than 90%. When discharging, the power level will remain at 7% for more than ten minutes, then directly change to 3%, and the...
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
