IP Rating............................................................. IP 40 .....................................................................IP 40
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Mechanical Characteristics
1
Stop Strength (1/4 ” D shaft) .............................................................................................................................................45.19 N-cm (4 lb.-in.)
(1/8 ” D shaft) .............................................................................................................................................33.89 N-cm (3 lb.-in.)
Starting ........................................................................................................................................... 0.3 max. above average running torque
Running Torque
Single or Dual Section (A & R Bushings) .................................................................................................. 0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)
Single or Dual Section (C & U Bushings) .................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Mounting .............................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Variation ...................................................................................................................... 0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel
Weight (Single Section, Metal Bushing)...............................................................................................................................12.7 grams nominal
Terminals .................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs
Soldering Condition ...........................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking ..................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number
Ganging (Multiple Section Potentiometers).............................................................................................................................2 cups maximum
Hardware ...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ........................................................................................................................................................N.O/N.O., N.C./N.C. or N.O./N.C.
DPDT ..........................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ..................................................................................... 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT .....................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Contact Bounce ...........................................................................................................................................................5 milliseconds maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Operating Temperature Range .................................................................................................................................................... 0 °C to +70 °C
Exposure Temperature Range ................................................................................................................................................-65 °C to +125 °C
Vibration (Dual Section).................................................................................................................................................................................. 8 G
Contact Resistance .................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section).................................................................................................................................................................................... 20 G
Contact Resistance .................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ................................................................................................................................................................................25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) ........................................................... 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ................................................................................................................................................ 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................... 10 milliohms maximum
Housing Material .......................................................................................................High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only).............................................................................. 3.53 to 10.59 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly) ............................................................................. 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ................................................................................................................................................................................CW or CCW standard
Contact Materials.................................................................................................................................................... Fine silver with gold overlay
Terminal Styles .............................................................................................................................................................................Solder lug only
Standard Orientation ........................................................................................................................................ In-line with control terminals
Optional ....................................................................................................................................................Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .................................................................................... 0.9 kg (2 lbs.) minimum
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Product Dimensions
Model 97 PC Pin Terminals, “L” Pattern
MOUNTING
SURFACE
L
12.70 ± .229
(.500 ± .009)
0.79 ± .025
(.031 ± .010)
DIA.
13.72 ± 0.38
(.540 ± .015)
1.37 ± 0.08
(.054 ± .003)
2.36 ± 0.08
(.093 ± .003)
15.88
(.625)
7.92
(.312)
SEE
HOW TO ORDER
CHART FOR
BUSHING OPTIONS.
DIA.
0.81
TYP.
(.032)
5.08 ± 0.38
(.200 ± .015)
11.05 ± 0.20
(.435 ± .008)
R1
1.19
(.047)
“A” STYLE
A.R. LUG
R
9.53
(.375)
12.7 ± 1.02
(.500 ± .040)
2.54
(.100)
2.54
(.100)
0.76 ± 0.05
(.030 ± .002)
TYP.
1
3
2
SEE
NEXT PAGE
FOR SHAFT
OPTIONS.
Model 99 Solder Lug Terminals, "Triangular" Pattern
Supercapacitors are a new type of energy storage device between electrolytic capacitors and batteries. They have the characteristics of long cycle life and large current charge and discharge. They hav...
1. Job analysis of single-chip microcomputer1. Hardware directiona. Familiar with the design and application of analog circuits and digital circuits;b. Have experience in project schematic PCB design ...
[size=4] The clock problem of MSP430 has always been vague, and I always forget it, so I decided to write this article to help me remember. The following content is all referenced to online materials ...
The serpentine line is a routing method often used in the PCB wiring process. Its main purpose is to adjust the delay and meet the system timing design requirements. However, every PCB design engineer...
The company has made a car side turn signal light, the circuit is very simple, now when the power is off, the ground of the static gun is connected to the product input ground, when 4KV static electri...
Through the internal timer of S3C2440, a stable timer interrupt can be generated. The sample program generates an interrupt every 0.5s and lights up the small light cyclically during the interrupt. ...[Details]
My Journey into Embedded Linux mainly describes and summarizes each step I took in learning embedded Linux. First, it summarizes my experience, and second, it hopes to provide convenience for friends...[Details]
According to Strategy Analytics, the global smartphone application processor (AP) market achieved double-digit year-on-year revenue growth for the sixth consecutive quarter in the second quarter of 2...[Details]
As one of the most commonly used time domain instruments for electronic engineers, the oscilloscope is a commonly used testing tool for circuit design, research and development, experimentation, manu...[Details]
June 9, 2021 – Mouser Electronics, Inc., the premier New Product Introduction (NPI) and global supplier of the electronic components, today announced a global distribution agreement with PANJIT, a di...[Details]
1. What are the certification test requirements for short-range communication products?
ETSI EN 300 220: Applicable to short-range wireless communication equipment, suitable for the RF test require...[Details]
1. Fully automatic measurement: After setting, just press the test button to complete all the work (automatic stirring, automatic resting, automatic voltage increase, automatic voltage reduction, aut...[Details]
Contemporary electronic circuit design, especially embedded circuit design, faces many new technology challenges, such as more bus applications, higher-speed clocks and digital signals, more integrat...[Details]
At noon today, Tianfeng International analyst Ming-Chi Kuo released the latest Apple research report. The report states that compared with 2020, the coverage of global 5G millimeter wave infrastruc...[Details]
Recently, @CCTV Finance Channel reported that BlackBerry Canada recently announced that it would stop updating the service system of BlackBerry mobile phones, which means that almost all models of th...[Details]
This circuit is designed based on the students' practical training. In order to fully understand the three working states of the triode (saturation, amplification, and cutoff) and the use of electro...[Details]
introduction The European Southern Observatory (ESO) is an astronomical research institute supported by 13 European countries. We have developed and deployed some of the most advanced telescopes in...[Details]
ADC can be called the pearl in the field of analog chips.
As a key component, ADC design is difficult and has a high patent wall, so China has always been in a state of catching up.
I...[Details]
Download Centre
京公网安备 11010802033920号
EEWORLD
