EEWORLDEEWORLDEEWORLD

Part Number

Search

177-710-2-15GP6K1-24PCN

Description
Interconnection Device
CategoryThe connector    The connector   
File Size436KB,4 Pages
ManufacturerGlenair
Websitehttp://www.glenair.com/
Environmental Compliance
Download Datasheet Parametric View All

177-710-2-15GP6K1-24PCN Overview

Interconnection Device

177-710-2-15GP6K1-24PCN Parametric

Parameter NameAttribute value
Is it lead-free?Lead free
Is it Rohs certified?conform to
Reach Compliance Codecompli
Connector typeINTERCONNECTION DEVICE
Base Number Matches1
MWDM Micro-D Shielded Cable Assemblies
Single-Ended or Double-Ended–These
easy-to-order cable
assemblies eliminate the need for expensive assembly
labor. 100% tested and ready for use.
Now With Twisted Pairs–No
need to create a procurement
specification for Micro-D cables with twisted pairs. Glenair
177-740 cables are furnished with a full complement of
white/blue twisted pair wires.
Integral Shield Termination–The
connector shell has a
platform to accept Band-It shield termination bands. The
cable shield braid is attached directly to the connector.
Save Labor, Reduce Weight and Improve EMI Shielding with
Glenair’s Micro-D Shielded Cable Assemblies
Aerospace electronics systems require higher and higher levels of protection from radiated emissions. Glenair’s fully
shielded Micro-D cable assemblies meet this need. The cable shield is attached directly onto the one-piece connector
shell and secured with a stainless steel
BAND-IT
® clamp. These pre-wired, 100% tested assemblies meet the
requirements of MIL-DTL-83513. An optional ground spring on the pin connector assures low shell-to-shell resistance.
Available with a variety of wire types and shields, Micro-D shielded assemblies can be ordered in any length, either
single-ended or “back-to-back”.
Ground Spring and EMI Shielding Effectiveness
– A gold-plated
stainless steel ground spring on the pin connector mating face offers
substantial improvement in EMI protection. The graphs compare
identical connectors tested with and without ground springs.
EMI Performance with Ground Spring
SHIELDING EFFECTIVENESS (DB)
SHIELDING EFFECTIVENESS (DB)
100
90
80
70
60
50
40
30
20
10
0
1.00E+03
100
90
80
70
60
50
40
30
20
10
0
1.00E+03
EMI Performance without Ground Spring
1.00E+04
1.00E+05
1.00E+06
1.00E+07
1.00E+08
1.00E+09
1.00E+04
1.00E+05
1.00E+06
1.00E+07
1.00E+08
1.00E+09
FREQUENCY (Hz)
FREQUENCY (Hz)
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
B-8
E-Mail: sales@glenair.com
The blueNRG-1 chip will burn out automatically when running the program (solved)
[i=s]This post was last edited by Senbenzakura Dabai on 2020-11-11 14:17[/i]Phenomenon: After welding, the chip can be connected normally without a program at first. It is also normal without a system...
千本樱大白 ST - Low Power RF
Application of DSP repetitive control technology in inverter power supply system
This paper proposes a DSP repetitive control scheme, which uses a repetitive controller to track the periodic reference command signal, reduce the output voltage harmonics, and improve the dynamic per...
Jacktang DSP and ARM Processors
The ov7725 camera has serious distortion. What's going on?
I used the Wildfire ov7725 camera to display the image on the LCD screen, but the distortion was so severe that it was unusable.[img]https://s1.328888.xyz/2022/05/11/HIofe.jpg[/img] [img]https://s1.32...
xycgood EE_FPGA Learning Park
【CH579M-R1】+Help: How to receive complete serial port data
The serial port example test can receive and send data. In the serial port debugging assistant, sending and receiving are normal. The following figure shows the test process. Regardless of the length ...
hujj Domestic Chip Exchange
Regarding the calculation of the values of TA0CCR1 and TA0CCR2 configured by the PWM library function
According to this library function, from the TA0_PWM_Init() function, if working in dead zone mode, channel 1 works in mode 6 and channel 2 works in mode 2, then in the TA0_PWM_SetPermill() function c...
baqs603 TI Technology Forum
What does the Y axis of the graph displayed by the baud meter mean? For example, if it starts at 5DB and ends at -100DB, how do you understand it? Attenuation signal...
What does the Y axis of the graph displayed by the baud meter mean? For example, how do you understand the starting value of 5DB and the final value of -100DB? How do you understand the strength of th...
QWE4562009 Integrated technical exchanges

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号