IP Rating............................................................. IP 40 .....................................................................IP 40
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Mechanical Characteristics
1
Stop Strength (1/4 ” D shaft) .............................................................................................................................................45.19 N-cm (4 lb.-in.)
(1/8 ” D shaft) .............................................................................................................................................33.89 N-cm (3 lb.-in.)
Starting ........................................................................................................................................... 0.3 max. above average running torque
Running Torque
Single or Dual Section (A & R Bushings) .................................................................................................. 0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)
Single or Dual Section (C & U Bushings) .................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Mounting .............................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Variation ...................................................................................................................... 0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel
Weight (Single Section, Metal Bushing)...............................................................................................................................12.7 grams nominal
Terminals .................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs
Soldering Condition ...........................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking ..................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number
Ganging (Multiple Section Potentiometers).............................................................................................................................2 cups maximum
Hardware ...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ........................................................................................................................................................N.O/N.O., N.C./N.C. or N.O./N.C.
DPDT ..........................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ..................................................................................... 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT .....................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Contact Bounce ...........................................................................................................................................................5 milliseconds maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Operating Temperature Range .................................................................................................................................................... 0 °C to +70 °C
Exposure Temperature Range ................................................................................................................................................-65 °C to +125 °C
Vibration (Dual Section).................................................................................................................................................................................. 8 G
Contact Resistance .................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section).................................................................................................................................................................................... 20 G
Contact Resistance .................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ................................................................................................................................................................................25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) ........................................................... 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ................................................................................................................................................ 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................... 10 milliohms maximum
Housing Material .......................................................................................................High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only).............................................................................. 3.53 to 10.59 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly) ............................................................................. 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ................................................................................................................................................................................CW or CCW standard
Contact Materials.................................................................................................................................................... Fine silver with gold overlay
Terminal Styles .............................................................................................................................................................................Solder lug only
Standard Orientation ........................................................................................................................................ In-line with control terminals
Optional ....................................................................................................................................................Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .................................................................................... 0.9 kg (2 lbs.) minimum
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Product Dimensions
Model 97 PC Pin Terminals, “L” Pattern
MOUNTING
SURFACE
L
12.70 ± .229
(.500 ± .009)
0.79 ± .025
(.031 ± .010)
DIA.
13.72 ± 0.38
(.540 ± .015)
1.37 ± 0.08
(.054 ± .003)
2.36 ± 0.08
(.093 ± .003)
15.88
(.625)
7.92
(.312)
SEE
HOW TO ORDER
CHART FOR
BUSHING OPTIONS.
DIA.
0.81
TYP.
(.032)
5.08 ± 0.38
(.200 ± .015)
11.05 ± 0.20
(.435 ± .008)
R1
1.19
(.047)
“A” STYLE
A.R. LUG
R
9.53
(.375)
12.7 ± 1.02
(.500 ± .040)
2.54
(.100)
2.54
(.100)
0.76 ± 0.05
(.030 ± .002)
TYP.
1
3
2
SEE
NEXT PAGE
FOR SHAFT
OPTIONS.
Model 99 Solder Lug Terminals, "Triangular" Pattern
The holiday is over, and it’s time to go back to work! No matter if you have had enough fun, eaten enough, or are still immersed in the joy of the Spring Festival, you have to face the reality of goin...
In the electronics industry, what does a wire connector look like? How do you use it? I think many people don't know. This article will explain it to you.
Wire connectors are a very important category...
Recently, a friend wants to install a water pump with a motor power of 7.5KW (three-phase power supply 380V). He does not want to buy a soft starter or a frequency converter, but a hard starter. Does ...
ADIShijian New Infrastructure Series Episode 2 - Answer the Energy Storage Questions to Win Gifts! Let's Start~Click here to enter the eventEnergy Storage and Power Conversion
Analog Devices offers a ...
In the past few days, I saw a forum that I often followed before explaining some issues of function return type design. I think it is very thorough, so I share it with you here! I don’t know since wh...
To use the timer/counter interrupt, the following conditions must be met. 1) Interrupts are always enabled EA = 1; 2) The interrupt source is allowed to be turned on ET0 = 1 or ET1 = 1; 3) Set ...[Details]
News on the morning of May 14th: Recently, the Utah state of the United States rejected Apple and Google's new coronavirus contact tracing program framework and instead used an app from a start...[Details]
Today I would like to talk to you about a hot topic - "cloud-network integration". In recent years, with the rapid development of cloud computing and the full launch of 5G construction, the four wo...[Details]
Bloomberg reported that Chinese computer chip importers are increasing equipment purchases through Hong Kong channels, anticipating that U.S. sanctions on Hong Kong will make trade more difficult. In...[Details]
Due to the impact of the epidemic, Apple Stores around the world have faced different situations over the past year or so. Some stores have been operating normally, while some stores have had to susp...[Details]
Electromagnetic flowmeter is a commonly used flow measurement instrument, which is widely used in many industries. There are many types of electromagnetic flowmeters, among which LD intelligent electr...[Details]
In the iOS 14 update, in addition to the new translation app dedicated to iPhone and iPad , Apple’s built-in Safari browser has finally added a translation function. For friends who often use Safari...[Details]
When you are new to C51, you will always have such questions: where does the program go after you download it from the computer to the development board? Where are the user or application programs, s...[Details]
On the evening of May 12, Apple launched a major update to Logic Pro X. The version number is 10.5, which brings a professional version of real-time loops, a completely redesigned sampling wor...[Details]
The alarm problem after replacing the servo motor encoder may be caused by many reasons.
1. Basic knowledge of servo motor encoder
The role of servo motor encoder
A servo...[Details]
There are three standard frequency weighting networks in the sound level meter: A, B, and C. The A network simulates the human ear's response to the 40-square pure tone in the equal loudness cur...[Details]
Many drivers in the current Linux version are based on the device model, and LED is no exception.
Simply put, the device model is that the system thinks that all devices are connected to t...[Details]
Now looking back on my experience when I first started learning microcontrollers, I was most impressed and felt that the most difficult thing to learn was the circuit. At that time, I watched a video...[Details]
October 18, 2024 –
Mouser Electronics, the industry’s leading New Product Introduction (NPI) distributor of the widest selection of semiconductors and electronic components™, is now stocking Mi...[Details]
Kuxin brings communication SoC AR8030 to Dishui Lake China RISC-V Industry Forum Recently, Cool Core Microelectronics, which specializes in wireless image transmission and AI vision SoC chip desig...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
