REVISION V
Pb
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
EQDP-XXX-XX.XX-XXX-XXX-X-X
No OF POSITIONS
-014, -028, -042, -056
(PER ROW)
LENGTH
-XX.XX (INCHES)
(01.72 [43.7] MIN)
(SEE NOTE 2)
(SEE NOTE 8)
FIRST END
-TTR: TERMINAL, TOP, RIGHT
-TTL: TERMINAL, TOP, LEFT
-TBR: TERMINAL, BOTTOM, RIGHT
-TBL: TERMINAL, BOTTOM, LEFT
-STR: SOCKET, TOP, RIGHT
-STL: SOCKET, TOP, LEFT
-SBR: SOCKET, BOTTOM, RIGHT
-SBL: SOCKET, BOTTOM, LEFT
(SEE TABLE 1 & SHEET 2)
-TEU: TERMINAL, EDGE MOUNT, UP
-TED: TERMINAL, EDGE MOUNT, DOWN
-SEU: SOCKET, EDGE MOUNT, UP
-SED: SOCKET, EDGE MOUNT, DOWN
(SEE TABLE 5 & SHEET 6)
-TPU: TERMINAL, PANEL MOUNT, UP
-TPD: TERMINAL, PANEL MOUNT, DOWN
-SPU: SOCKET, PANEL MOUNT, UP
-SPD: SOCKET, PANEL MOUNT, DOWN
(SEE TABLE 10 & SHEET 6)
(ONLY AVAILABLE ON -014,-028, AND -042)
VERTICAL
(EQDP-028-XX.XX-STR-STR-1 SHOWN)
LENGTH: XX.XX + "L" REF (SEE TABLE 4)
SUB-EQDP-X-XXX-XX-XX
01
C1
FIG 1
LENGTH: XX.XX
02
01%
01
02
'A'
"A" REF
(TYP)
"B" REF
(TYP)
DO NOT
SCALE FROM
THIS PRINT
N-1
(SEE TABLE 3)
N-1
(SEE TABLE 3)
.775 19.69
REF (TYP)
.253 6.42 REF (TYP)
N
(SEE TABLE 3)
.565 14.35 REF (TYP)
SUB-EQDP-X-XXX-XX-XX
N
(SEE TABLE 3)
STS-01
(TIGHTEN TO 1.4 - 1.7 IN-LBS)
(4 PLCS)
QCD-XX-01
* "C" REF
END OPTION
-F: SCREW OPTION FIRST END ONLY
(NOT AVAILABLE WITH XPX OPTIONS)
-S: SCREW OPTION SECOND END ONLY
(NOT AVAILABLE WITH XPX OPTIONS)
-B: SCREW OPTION BOTH ENDS
(NOT AVAILABLE WITH XPX OPTIONS)
-L: FIRST END RT1 OPTION (SEE FIG 6, SHT 7)
(SEE NOTE 9 & 10)
-R: SECOND END RT1 OPTION (SEE FIG 6, SHT 7)
(SEE NOTE 9 & 10)
-D: BOTH ENDS RT1 OPTION (SEE FIG 6, SHT 7)
(SEE NOTE 9 & 10)
-1: FIRST SCREW OPTION,
SECOND END RT1 OPTION (SEE FIG 6, SHT 7)
(SEE NOTE 9 & 10)
-2: FIRST END RT1 OPTION,
SECOND END SCREW OPTION (SEE FIG 6, SHT 7)
(SEE NOTE 9 & 10)
-N: NO CAPS
(SEE FIG 3, SHEET 6 FOR EDGE MOUNT
END OPTIONS)
(SEE FIG. 4, SHEET 6 FOR DOUBLE
VERTICAL END OPTIONS)
(SEE FIG 5, SHEET 7 FOR NO CAPS OPTIONS)
(LEAVE BLANK FOR STANDARD CAPS
BOTH ENDS)
WIRING OPTION
SECOND END
**-1: PIN 1 TO PIN 1
**-2: PIN 1 TO PIN 2
-TTR: TERMINAL, TOP, RIGHT
**-3: PIN 1 TO PIN N-1
-TTL: TERMINAL, TOP, LEFT
**-4: PIN 1 TO PIN N
-TBR: TERMINAL, BOTTOM, RIGHT
-5: PIN 1 TO PIN 1
-TBL: TERMINAL, BOTTOM, LEFT
-6: PIN 1 TO PIN 2
-STR: SOCKET, TOP, RIGHT
-7: PIN 1 TO PIN N-1
-STL: SOCKET, TOP, LEFT
-8: PIN 1 TO PIN N
-SBR: SOCKET, BOTTOM, RIGHT
(SEE TABLE 9, SHEET 7)
-SBL: SOCKET, BOTTOM, LEFT
(SEE NOTE 13)
(SEE TABLE 1 & SHEET 4)
-TEU: TERMINAL, EDGE MOUNT, UP
-TED: TERMINAL, EDGE MOUNT, DOWN
-SEU: SOCKET, EDGE MOUNT, UP
-SED: SOCKET, EDGE MOUNT, DOWN
(SEE TABLE 5 & SHEET 6)
-TPU: TERMINAL, PANEL MOUNT, UP
-TPD: TERMINAL, PANEL MOUNT, DOWN
-SPU: SOCKET, PANEL MOUNT, UP
-SPD: SOCKET, PANEL MOUNT, DOWN
(SEE TABLE 10 & SHEET 6)
(ONLY AVAILABLE ON -014,-028, AND -042)
FIRST END
SECOND END
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
SUB-TTF-30100-07-XX-XX.XX
2. SUB-TTF LENGTH IS EQUAL TO EQDP LENGTH.
(SEE TABLE 1 FOR QTY)
QCD-XX-02
C2
3. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED.
HDRL-11
(SEE NOTE 5)
C3
4. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V.
5. TOP SUB-TTF NOT SHOWN IN THIS VIEW FOR CLARITY; HDRL-11
TO BE CENTERED ON LOWER SUB-TTF AS SHOWN; HDRL-11 IS
TO CONTAIN PART NUMBER, SHOP NUMBER & DATE CODE.
6. FOR SUB-ASSEMBLY AND FINISHED GOOD PACKAGING
REQUIREMENTS, REFERENCE PACKAGING STANDARD CO-HD-WI-3033-M.
7. PARTS TO BE PROCESSED PER SAMTEC ACCEPTABLILITY REQUIREMENTS:
HDR-PI-01 "CABLE ASSEMBLY WORKMANSHIP STANDARDS".
8. CABLE LENGTHS LONGER THAN 40.00 INCHES ARE NOT SUPPORTED BY
S.I. TEST DATA.
* -DV END OPTIONS ONLY
9. RT1 OPTION IS NOT AVAILABLE ON EDGEMOUNT OR PANEL MOUNT END OPTIONS.
**: AVAILABLE TO EXISITNG CUSTOMERS ONLY
10. RT1 OPTION IS NOT AVAILABLE WITH -056 PAIRS.
PROPRIETARY NOTE
11. DIFFERENTIAL PAIRS CONSIST OF ADJACENT PINS. FOR EXAMPLE, PIN POSITIONS 1 & 3, 2 & 4, 5 & 7, ETC.
UNLESS OTHERWISE SPECIFIED,
*
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
12. ALL POSITIONS ARE TRANSMITTED AS SIGNALS ACROSS TWINAX CENTER CONDUCTORS. CONNECTOR
DIMENSIONS ARE IN INCHES.
PROPRIETARY INFORMATION AND ALL DESIGN,
GROUND BLADES ARE TIED TO THE TWINAX SHIELD. FOR MULTIPLE BANK ASSEMBLIES, EACH BANK IS
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
TOLERANCES ARE:
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
GROUND INDEPENDENT OF THE OTHERS.
DECIMALS
ANGLES
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
13. WIRING OPTION -5 THROUGH -8 USE 30100CU.
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
.XX: .01 [.3]
2
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
14. REFER TO PREP-SPEC.PDF FOR CABLE PREP DIMENSIONS.
.XXX: .005 [.13]
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
.XXXX: .0020 [.051]
WRITTEN CONSENT OF SAMTEC, INC.
ASSEMBLY USES
STANDARD PCB
PREP.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
LENGTH REF
DETAIL 'A'
SCALE 2.5 : 1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
0.8mm HIGH-SPEED TWIN-AX CABLE ASSEMBLY
EQDP-XXX-XX.XX-XXX-XXX-X-X
SHEET
1
OF
9
F:\DWG\MISC\MKTG\EQDP-XXX-XX.XX-XXX-XXX-X-X-MKT.SLDDRW
BY:
BRATCHER 11/13/03
京公网安备 11010802033920号
EEWORLD
