85°C ± 2°C, 85%±5%RH, 1000 hours; 1.5 hr ON, 0.5 hr OFF cycle
85°C ± 2°C, 3000 hours, 1.5 hr ON, 0.5 hr OFF cycle
+155°C, 1000 hours
* Depends on resistance value, please contact KOA Speer for details.
Precautions for Use
• The properly and electrostatically measured taping materials are used for the components, but attention should be paid to the fact that there is some danger the parts
absorb on the top tapes to cause a failure in the mounting and the parts are destructed by static electricity (1J, 2A, 2B, 2E: 1kV and more, 1E: 0.5kV and more at Human
Body Model 100pF, 1.5kΩ) to change the resistance in the conditions of an excessive dryness or after the parts are given vibration for a long time as they are packaged
on the tapes. Similarly, care should be given not to apply the excessive static electricity when mounting on the boards.
• Ionic impurities such as flux etc. that are attached to these products or those mounted onto a PCB, negatively affect their moisture resistance, corrosion resistance, etc.
The flux may contain ionic substances like chlorine, acid, etc. while perspiration and saliva include ionic impurities like sodium (Na＋), chlorine (Cl−) etc. Therefore these
kinds of ionic substances may induce electrical corrosion when they invade into the products. Either thorough washing or using RMA solder and flux are necessary since
lead free solder contains ionic substances. Washing process is needed, before putting on moisture proof material in order to prevent electrical corrosion.
●
The upper electrodes could be peeled off when a heat-resistant masking tape is attached to the mounted chip resistors and then detached from them. It is confirmed that
the adhesiveness gets stronger due to the exposure to heat under mounting. Accordingly, we recommend the use of masking tape be refrained. If the use of heat-resistant
masking tape is unavoidable, please make sure that the adhesives on the tape do not directly come in contact with the product.
●
When high-pressure shower cleaning is implemented, there is a possibility of exfoliation of the top electrodes caused by the water pressure stress so please avoid
the implementation.
●
If the implementation is unavoidable, then please evaluate the products beforehand.
For Surface Temperature Rise Graph see Environmental Applications. Additional environmental applications can also be found at www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
11/06/18
28
KOA Speer Electronics, Inc.
• 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
How to read and write the internal EEPROM of LPC4357? Can it be programmed to read and write? Is there anyone who can do the relevant work and verify it? Please discuss the price in detail. If you are...
From June 26 to 28, the 2019 Mobile World Congress (MWC) was held in Shanghai, and the exhibition was held at the same time. The reporter found that there were many CPE products on display at the exhi...
With the support of national policies and the increasing market demand, the Internet of Things technology is being used more and more in production and life scenarios. The core of the Internet of Thin...
One of the biggest complaints about RGB is the software ecosystem surrounding it. Every manufacturer has its own app, its own brand, its own style. If you want to mix and match devices, you end up wit...
[i=s]This post was last edited by xy598646744 on 2020-6-9 22:39[/i]I recently got an old spectrum analyzer Advantest R4131D. The frequency is accurate, but the power is inaccurate. I disassembled it t...
A small program for adding is given above, but what if the requirements become more complicated and the steps become more cumbersome? We can use subroutines to solve this problem. Here is an exampl...[Details]
On January 12, the latest survey by Strategy Analytics showed that from the Christmas season to 2022, people have a strong desire to buy a series of smart devices such as smartphones, wearable device...[Details]
High-frequency current probes are mainly used for measurements of floating systems. In power system testing, it is often required to measure the relative voltage difference between the live wire an...[Details]
November 9, 2010, at the Electronica 2010 in Munich and Oslo, Norway – Energy Micro, the energy-efficient microcontroller company, has added a universal low-energy sensor interface to its
EFM32...[Details]
Recently, Intel held a media sharing session on AI practice, introducing the latest Intel® Nervana™ Neural Network Processor (NNP) and the next-generation Intel® Movidius™ Myriad™ Visual Processing U...[Details]
In order to match various light scenes, create a comfortable environment, reduce light pollution and save electricity,
the birth of
lighting
automation system solves many problems in our...[Details]
In today's era of scarce resources, topics such as low-carbon economy, energy conservation and emission reduction, and green lighting are common, and the LED solid-state lighting technology advocat...[Details]
Part 01 ● GPU main uses and related API standards ●
The main uses of GPU explored in this issue include: graphics rendering, computing acceleration, and video encoding and decoding.
Graph...[Details]
DS1302 is a low-power real-time clock chip that can count years, months, days, weeks, hours, minutes, seconds, and has multiple functions such as leap year compensation. The main features are serial ...[Details]
Square wave to triangular wave circuit diagram Square wave to triangular wave circuit diagram is an oscillator circuit with triangular wave and rectangular wave output. The circuit is composed of Mil...[Details]
When debugging a problematic circuit and want to see the waveform, the circuit is normal when the probe is connected, but the problem occurs again when the probe is removed. This is caused by the ...[Details]
Preface
The SDI conversion control board is an SDI signal converter independently developed by our company and is suitable for the broadcasting and television industry. It can support input of...[Details]
In the first three classes, Pi Ziheng introduced input files in embedded development. Starting from today's class, Pi Ziheng will talk about output files. In the last class, I talked about the proj...[Details]
According to a report from IHS Markit on October 16, global sales of TFT LCD panels used in automotive displays will decline for the first time in 2019, falling to 156 million units after 10 consecu...[Details]
Recently, Wuhan Municipal Bureau of Economics and Information Technology announced the results of the 2024 unicorn enterprise certification. 44 enterprises in the city were selected, of which 31 were ...[Details]
NXP MCU
京公网安备 11010802033920号
EEWORLD
