Hello everyone, I work in RF, I don't know much about digital aspects, and I use few chips. Recently I am working on a project that requires using logic circuits to control the on and off of the RF sw...
After a long wait, the package finally arrived. Now I will make an unpacking report.First of all, the packaging box is very large.After unpacking, the upper and lower layers inside are protected by th...
Recently, when I used CCS to connect XDS100V3 to debug CC1310, I found that I could not connect to the target board.
The following error is reported during Verify:
[Start]
Execute the command:
%ccs_ba...
Last time, the environment was set up, the simulator can run, and then the Android operating environment appeared. Because when I selected Lunch, I chose the Car platform, so the horizontal UI style b...
I encountered a problem when using pic18F27Q10 . When operating the flash eeprom , I could not write data, but I could read data and could not erase it.I have checked the code examples and can't see a...
[i=s]This post was last edited by Digital Leaf on 2022-4-13 21:21[/i]After a few days of practice, I have a better understanding of Openharmomy, such as how to compile a simple program into the system...
Coolpad officially announced that it will release a new phone on June 13, equipped with symmetrical dual speakers. No other information has been released yet. Previously, the preheating fo...[Details]
First, a passage from the manual. Three different clock sources can be used to drive the system clock (SYSCLK) HSI oscillator clock HSE oscillator clock PLL clock The PLL clock is generally...[Details]
I helped them buy things for their practice car a while ago. I bought an infrared remote control and an 1838 infrared receiver because they were cheap. I was free these two days and read a lot of...[Details]
IC design company Realtek held a legal meeting yesterday (26th) and said that its products continue to be in short supply. At present, in the second half of this year and even most of next year, the...[Details]
The Internet of Things has opened up a world full of new possibilities for us, in which almost everything is connected. So in terms of the future, what aspects should the Internet of Things be deploy...[Details]
Environment: TQ2440 development board, J-link Programming to the Nor Flash of the TQ2440 development board through J-link, an error occurred when executing the programming: Unable to halt arm core......[Details]
Proximity sensing is becoming increasingly accepted as a method of detecting the presence of a user's body or hand in consumer electronics. The technology can also be used for motion sensing, such ...[Details]
When VMOS or IGBT is used as the switching element in the inverter, the charging circuit formed has a higher operating frequency than the charging circuit using thyristor as the switching element. ...[Details]
According to foreign media reports, American technology company Draper has launched a new pedestrian detection system PathScout, which sends an alert to the driver when it detects the GPS signal of a...[Details]
Introduction
Micromanipulation has been applied in many fields, especially in nano-micron positioning systems, which require sensors to detect tiny forces and displacements . At present, ther...[Details]
With the advancement of global energy reform and transformation and upgrading, and the continuous improvement of carbon emission requirements, the new energy industry has developed rapidly in recen...[Details]
Three-dimensional printing manufacturing is one of the hot technologies in the field of rapid manufacturing in recent years. According to the research of this group, the use of μC/OSⅡ operating syste...[Details]
The software logic analyzer in Keil MDK has powerful functions, which can analyze digital signals, analog signals, CPU bus (UART, IIC and other output pins), and provide debugging function mechanism t...[Details]
The number of electronic components in cars is increasing rapidly as more mechanical parts are replaced by electronic parts and driver assistance systems become more prevalent. This trend has put...[Details]
In automotive power systems, damage to DC-DC converters can be caused by a variety of factors. However, one of the main reasons is that the residual voltage of the surge TVS (overvoltage protector)...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
