AC DC
15 80 Watts
AEL Series
•
•
•
•
•
•
•
Energy Efficiency Level V
xppower.com
CEC 2008 and EISA 2007 Compliant
Limited Power Source Approval
China Compulsory Certification (CCC) Qualified
+60 °C Operating Temperature
Compact Dimensions
3 Year Warranty
Specification
Input
• 90-264 VAC
• 47-63 Hz
• AEL15/20: 0.4 A max at 115 VAC
AEL40: 1.0 A max at 115 VAC
AEL60: 1.6 A max at 115 VAC
AEL80: 1.1 A max at 115 VAC
Inrush Current
• AEL15/20: 15/30 A max for 115/230 VAC,
AEL40: 25/50 A max for 115/230 VAC,
AEL60: 35/70 A max for 115/230 VAC,
AEL80: 45/92 A max for 115/230 VAC,
cold start at 25 °C
Earth Leakage Current
• 0.75 mA at 240 VAC
Power Factor
• EN61000-3-2, Class A
Input Protection
• Internal fuse in line,
AEL15/20: T1 A, 250 V
AEL40: T2 A, 250 V
AEL60/80: T3.15 A, 250 V
No Load Input Power
• 0.5 W maximum, model dependent
Input Voltage
Input Frequency
Input Current
General
Efficiency
Energy Efficiency
Isolation
• See tables
• Model dependent, see tables
• 3000 VAC Input to Output
1500 VAC Input to Ground*
500 VDC Output to Ground*
*Not C8 version
All class I models available with output
negative connected to ground. See notes.
• 63 kHz typical
• >100 kHrs to MIL-HDBK-217F
at 25 °C, GB
Switching Frequency
MTBF
Environmental
Operating Temperature
• -20 °C to +60 °C, derate linearly from
100% power at +40 °C to 50% power at
+60 °C
Storage Temperature
• -40 °C to +85 °C
Cooling
• Convection cooled
Operating Humidity
• 5-95% RH, non-condensing
Operating Altitude
• 2000 m
Shock
• 10 g, 10 ms on 3 axes
Output
• See tables
• No minimum load required
• AEL15: 5 ms min, AEL20/40: 12 ms min,
AEL60/80: 16 ms min, at full load
110 VAC
Start Up Delay
• AEL20/40: 0.5 s, AEL15/60/80: 2.0 s
max at full load 100 VAC
Transient Response
• 2% max deviation, recovery to within 1%
of nominal in 500 µs for 50% load change
Line Regulation
• See tables
Load Regulation
• See tables
Ripple & Noise
• 1% pk-pk, 20 MHz bandwidth
Overvoltage Protection
• 112-132% (AEL40/60/80 only)
Overload Protection
• 110-150% (AEL20/40/60/80 only)
Short Circuit Protection
• Trip & restart (hiccup mode),
auto recovery
Temperature
• ±0.04%/°C
Coefficient
Output Voltage
Minimum Load
Hold Up Time
EMC & Safety
Emissions
Harmonic Current
Voltage Flicker
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Magnetic Field
Dips & Interruptions
Safety Approvals
•
•
•
•
•
•
•
•
•
•
•
EN55022 level B conducted & radiated
EN61000-3-2 class A
EN61000-3-3
EN61000-4-2 Level 2 (contact) Perf Criteria A
EN61000-4-2 Level 3 (air) Perf Criteria A
EN61000-4-3, 3 V/m, Perf criteria A
EN61000-4-4, level 2, Perf criteria A
EN61000-4-5, installation class 3,
Perf criteria A
EN61000-4-6, level 2, Perf criteria A
EN61000-4-8, 1 A/m, Perf criteria A
EN61000-4-11, 30% 10 ms, 60% 100 ms,
100% 5000 ms Perf Criteria A, B, B
EN60950-1: UL/cUL60950-1,
Approved as Limited Power Source
(AEL15-60 only), China Compulsory
Certification (CCC) qualified.
Models and Ratings
Output Power
8W
12 W
Output Voltage
3.3 VDC
5.0 VDC
8.0 VDC
9.0 VDC
12.0 VDC
15.0 VDC
15 W
18.0 VDC
24.0 VDC
30.0 VDC
36.0 VDC
48.0 VDC
(3)
AEL15
Output Current
2.50 A
2.40 A
1.87 A
1.66 A
1.25 A
1.00 A
0.83 A
0.62 A
0.50 A
0.42 A
0.31 A
Total Regulation
(2)
7%
7%
5%
5%
5%
5%
5%
5%
5%
3%
3%
Efficiency
(5)
68%
78%
79%
79%
80%
81%
82%
78%
77%
75%
81%
Model Number
(1,6)
AEL15US03
(4)
AEL15US05
AEL15US08
AEL15US09
AEL15US12
AEL15US15
AEL15US18
AEL15US24
(4)
AEL15US30
(4)
AEL15US36
(4)
AEL15US48
AC DC
Notes
1.
2.
3.
4.
5.
6.
Standard input connector is IEC320-C14 Inlet. For optional IEC320-C6 Inlet, add suffix “C6” to model number e.g. AEL15US12C6.
Total regulation includes line regulation and load regulation.
Other output voltages available, contact sales for details.
Energy Efficiency Level IV.
Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.
For output negative connected to ground add suffix G.
Mechanical Details
3.58 (91.0)
AC INPUT
IEC-320-C6 INLET
AC INPUT
IEC-320-C14 INLET
Notes
1.
2.
3.
4.
5.
6.
7.
8.
All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max.
Output connector: is 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0).
Output cable length is 48” (1220mm) approx.
Weight: 0.36 lbs (165 g)
For European mains lead order part: EU-MAINS-IEC or EU-MAINS-5 for C6 version.
For UK mains lead order part: UK-MAINS-IEC or UK-MAINS-5 for C6 version.
For US mains lead order part: US-MAINS-IEC or US-MAINS-5 for C6 version.
Mains lead length is 78“ (2000 mm) approx
1.42 (36.0)
1.50 (38.0)
AC DC
Models and Ratings
Output Power
15 W
Output Voltage
(3)
5 VDC
12 VDC
15 VDC
20 W
24 VDC
30 VDC
48 VDC
Output Current
3.00 A
1.67 A
1.33 A
0.83 A
0.67 A
0.42 A
Total Regulation
(2)
5%
4%
4%
3%
3%
3%
Efficiency
(4)
79%
86%
85%
87%
86%
87%
AEL20
Model Number
(1,5)
AEL20US05
AEL20US12
AEL20US15
AEL20US24
AEL20US30
AEL20US48
Notes
1.
2.
3.
4.
5.
For optional class II version on AEL20 models only, add suffix ‘C2’ to model number e.g. AEL20US12C2.
Total regulation includes line regulation and load regulation.
Other output voltages available, contact sales for details.
Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.
For output negative connected to ground add suffix -G.
Mechanical Details
3.90 (99.0)
0.02 (0.5)
1.22 (31.0)
1.65 (42.0)
AC INPUT
IEC-320-C8 INLET
(Optional C2 Version)
AC INPUT
IEC-320-C6 INLET
Notes
1.
2.
3.
4.
5.
6.
7.
8.
All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max.
Output connector: 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0).
Output cable length is 48” (1220mm) approx.
Weight: 0.37 lbs (170 g)
For European mains lead order part: EU-MAINS-C5 for AEL20, EU-MAINS-8 for AEL20 Class II.
For UK mains lead order part: UK-MAINS-5 for AEL20, UK-MAINS-8 for AEL20 Class II.
For US mains lead order part: US-MAINS-5 for AEL20, US-MAINS-8 for AEL20 Class II.
Mains lead length is 78“ (2000 mm) approx
0.04 (1.0)
Models and Ratings
Output Power
25 W
35 W
Output Voltage
(2)
5 VDC
8 VDC
9 VDC
12 VDC
15 VDC
40 W
18 VDC
24 VDC
36 VDC
48 VDC
Output Current
5.00 A
4.37 A
3.88 A
3.33 A
2.67 A
2.22 A
1.67 A
1.11 A
0.83 A
Total Regulation
(1)
7%
5%
5%
5%
5%
5%
3%
3%
3%
Efficiency
(4)
79%
82%
83%
87%
87%
86%
86%
89%
91%
AEL40
Model Number
(5)
AEL40US05
(3)
AEL40US08
(3)
AEL40US09
(3)
AEL40US12
AEL40US15
AEL40US18
AEL40US24
AEL40US36
AEL40US48
AC DC
Notes
1.
2.
3.
4.
5.
Total regulation includes line regulation and load regulation.
Other output voltages available, contact sales for details.
Energy Efficiency Level IV
Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.
For output negative connected to ground add suffix -G.
Mechanical Details
4.65 (118.0)
0.04 (1.0)
1.36 (34.5)
0.02 (0.5)
AC INPUT
IEC-320-C14 INLET
Notes
1.
2.
3.
4.
5.
6.
7.
8.
All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max.
Output connector: 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0).
Output cable length is 48” (1220mm) approx.
Weight: 0.64 lbs (275 g).
For European mains lead order part: EU-MAINS-IEC.
For UK mains lead order part: UK-MAINS-IEC.
For US mains lead order part: US-MAINS-IEC.
Mains lead length is 78“ (2000 mm) approx
2.05 (52.0)
0.04 (1.0)
AC DC
Models and Ratings
Max Output Power
57 W
Output Voltage
(2)
12 VDC
15 VDC
18 VDC
63 W
24 VDC
30 VDC
36 VDC
48 VDC
Output Current
4.75 A
4.20 A
3.50 A
2.63 A
2.15 A
1.75 A
1.31 A
Total Regulation
(1)
5%
5%
5%
5%
5%
3%
3%
Efficiency
(3)
87%
88%
88%
88%
90%
90%
90%
AEL60
Model Number
(4)
AEL60US12
AEL60US15
AEL60US18
AEL60US24
AEL60US30
AEL60US36
AEL60US48
Notes
1. Total regulation includes line regulation and load regulation.
2. Other output voltages available, contact sales for details.
3. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.
4. For output negative connected to ground add suffix -G.
Mechanical Details
4.65 (118.0)
0.04 (1.0)
1.36 (34.5)
0.02 (0.5)
AC INPUT
IEC-320-C14 INLET
Notes
1.
2.
3.
4.
5.
6.
7.
8.
All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max.
Output connector: 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0).
Output cable length is 48” (1220mm) approx.
Weight: 0.79 lbs (340 g).
For European mains lead order part: EU-MAINS-IEC.
For UK mains lead order part: UK-MAINS-IEC.
For US mains lead order part: US-MAINS-IEC.
Mains lead length is 78“ (2000 mm) approx
2.05 (52.0)
0.04 (1.0)
京公网安备 11010802033920号
EEWORLD
