753 Series
Features
Surface Mount Resistor Network
Low Profile Surface Mount Lead-Less Package
Solid Ceramic Construction
High Density Packaging
- Single Row [SRT] & Dual Row [DRT] Terminations
Nickel Barrier Solder-Coated Pads
No Internal Dendrite Growth
Designed for Visual Inspection & Board Cleanings
Tape and Reel Packaging
RoHS Compliant in Accordance with EU Directive 2011/65/EU
- Lead-Free Termination Finish
- Exemption 7(c)-I, Electrical and electronic components containing
lead [Pb] in glass
Part Weight:
08/16 Pads
•
90.70mg
09/18 Pads
•
102.00mg
10/20 Pads
•
112.20mg
12/24 Pads
•
134.60mg
Applications
Telecom Infrastructure
Optical Networking
Wireless Networks
Storage Area Networks
Media Servers
Test & Measurement
Industrial Controls
Medical Electronics
Commercial Military & Aerospace
Description
753 Series Resistor Networks are single packaged devices containing an array of homogeneous resistor elements.
CTS network designs provide a smaller circuit footprint, excellent reliability, improved TCR tracking and resistor
tolerance matching; while helping to save placement costs by reducing application component count.
Ordering Information
DOC# 008-0352-0 Rev. E
Page 1 of 8
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Surface Mount Resistor Network
753 Series
Electrical & Environmental Specifications
Operating Conditions
Resistance
Range
[ohm]
Resistance
Tolerance
[%]
1
Operating
Temperature
Range
Temperature
Coefficient
Dielectric
Strength
Maximum
Operating
Voltage
2
10 - 1M
±2% Std.
or
0.5 ohm
[whichever is greater]
-55°C to +125°C
±200ppm/°C
[standard, 10 Ohms - 1M]
100V
AC
25V
1. See Ordering Information for other options available.
2. Not to exceed rated power.
Power Rating
SRT
DRT
@ +25°C
@ +70°C
8 Pad
-
0.60W
0.40W
9 Pad
-
0.64W
0.43W
10 Pad
-
0.68W
0.45W
12 Pad
-
0.82W
0.55W
-
16 Pad
0.60W
0.40W
-
18 Pad
0.64W
0.43W
-
20 Pad
0.68W
0.45W
-
24 Pad
0.82W
0.55W
1. Total network power.
Maximum Resistor Power
Schematic
@ +25°C
@ +70°C
1
0.06W
0.04W
3
0.12W
0.08W
5
0.06W
0.04W
1. Not to exceed total network power.
Power Derating Curve
DOC# 008-0352-0 Rev. E
Page 2 of 8
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Surface Mount Resistor Network
753 Series
Electrical & Environmental Specifications
Circuit Types
Bussed SRT [Schematic 1]
Isolated SRT [Schematic 3]
[Not available in 9 Pads Configuration]
Dual Terminator SRT [Schematic 5]
[Not available in DRT]
Bussed DRT [Schematic 1]
Isolated DRT [Schematic 3]
[Not available in 18 Pads configuration]
Environmental Parameters
Test
Thermal Cycle
Short Time Overload
Moisture Resistance
Load Humidity
High Temperture Exposure
Load Life
Resistance to Solder Heat
Mechanical Shock
Vibration
Leaching Test
Shear Test
Low Temperature Storage
Low Temperature Operation
Flammability
Non-Fungus
Resistance to Solvents
Solderability
Maximum
Delta R [%]
0.50
0.50
0.50
1.00
1.00
1.00
0.25
0.25
0.25
NA
0.25
0.25
N/A
Pass
Pass
Pass
---
213 Condition I
204 Condition D
108 Condition F
106
MIL-STD-202
Method
107 Condition B
Test Description
5 cycles -65°C to +125°C
2½ times rated working voltage for 5 seconds [100V maximum]
240 hours, 0.1 rated load, -10°C to +65°C, 90% RH
1,000 hours, 0.1 rated load, +70°C, 85% - 92% RH
240 hours @ +125°C, no load
2,000 hours @ +70°C, rated load
30 seconds @ +218°C, dwell
100g, 1m second, 3 shocks each plane
20g, 10Hz - 2,000Hz, 4 houes per plane
Immererse in +245°C ±5°C SAC305 solder pot for 30 sec.
≥ 2,000PSI
24 hours @ -65°C, no load
45 minutes @ -65°C, full load
94V-0
MIL-STD-810C
Isopropyl alcohol, Freon TMC
RMA Flux, +230°C, 5 seconds dip, 95% coverage
No leach > 50% EIA/IS-703-4.13.B
DOC# 008-0352-0 Rev. E
Page 3 of 8
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Surface Mount Resistor Network
753 Series
Mechanical Specifications
Package Drawing
Package
SRT/DRT Pads
08/16
09/18
10/20
12/24
"A" Code Dimension
mm
6.22 ±0.12
6.86 ±0.12
7.49 ±0.12
8.76 ±0.12
inch
0.245 ±0.005
0.270 ±0.005
0.295 ±0.005
0.345 ±0.005
Dimensions
Code
B
C
D
E
F
G
H
mm
2.41 ±0.12
2.03 ±0.12
0.64 ±0.12
0.71 ±0.12
0.33 ±0.08
0.08 ±0.025
0.89 Ref.
inch
0.095 ±0.005
0.080 ±0.005
0.025 ±0.005
0.028 ±0.005
0.013 ±0.003
0.003 ±0.001
0.035 Ref.
Notes
1. JEDEC termination code (e3). Barrier plating is nickel [Ni] over silver [Ag] thick film pad with Matte tin [Sn] finish.
2. Reflow conditions per JEDEC-J-STD-020; +260°C maximum, 20 seconds.
3. MSL = 1.
Marking Information
1.
– Pin 1 identifier.
2. zz – Pad count, 8, 9, 10, 12, 16, 18, 20 or 24.
3. S – Schematic type, 1, 3 or 5.
4. xxxx – Resistance value code, 3 or 4 digits.
5. T – Resistor tolerance code; G, F or D. Leave blank for Schematic Code 5.
6. P – RoHS compliant.
7. YYWW – Date Code: YY – year, WW – week.
* See table for marking examples.
DOC# 008-0352-0 Rev. E
Page 4 of 8
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Surface Mount Resistor Network
753 Series
Mechanical Specifications
Marking Examples
Pad Count
[SRT/DRT]
12/24
10/20
9/18
8/16
Pad 1
Identifier
Yes
Yes
Yes
Yes
Pad
Count
No
No
No
No
Schematic Resistance Resistor Lead-Free
Number Value Code Tolerance
P Code
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CTS
Logo
No
No
No
No
Date
Code
Yes
Yes
Yes
Yes
Marking
Example
3220GP2012
1472GP2012
1104GP2012
1473GP2012
Associated
Part Number
753123220GP
753101472GP
753091104GP
753081473GP
Recommended Solder Pad Layout
Package
753
mm
inch
Dimensions
D
1.27
0.05
P
0.64
0.025
L
3.05
0.12
W
0.43
0.017
J
0.89
0.035
S
0.51
0.02
SRT Solder Stencil Opening
753, SRT
4 mil
6 mil
mm
inch
mm
inch
Dimensions
K
2.75
0.108
1.72
0.068
Sw
0.30
0.012
0.30
0.012
A
NA
NA
Q
0.15
0.006
0.15
0.006
DRT Solder Stencil Opening
753, DRT
4 mil
6 mil
mm
inch
mm
inch
Dimensions
K
0.51
0.02
0.28
0.011
Sw
0.30
0.012
0.30
0.012
A
1.32
0.052
1.47
0.058
Q
0.15
0.006
0.15
0.006
DOC# 008-0352-0 Rev. E
Page 5 of 8
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
京公网安备 11010802033920号
EEWORLD
