NISSEI-ARCOTRONICS
Bulk
R75
MKP Series
METALLIZED POLYPROPYLENE FILM
CAPACITOR
D.C. and PULSE APPLICATIONS
Typical application:
deflection circuits in TV-sets and
monitors (S-correction), resonant capacitor in electronic
ballast and compact lamp, power factor correction and
coupling capacitor in SMPS, timing, oscillator circuits.
SERIES CODE:
R75
Taped
Ød
±
0.05
p
≤
10
0.6
15
≤
p
≤
27.5
0.8
Fig. 2
12.70
p = 37.5
1.0
Fig. 3
19.05
Fig. 1
P
2
6.35
All dimensions are in mm.
PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
GENERAL TECHNICAL DATA
R7 5
1.
2.
3.
4.
5.
6.
7.
[ ]
Series code
Capacitance value in pico farads. First 2
digits are significant and 3
rd
digit indicates
number of zeros.
Capacitance tolerance
J = 5%
K = 10%
M = 20%
D.C. voltage
Packaging code
B = bulk
D = 7.5
N = 22.5
A = ammo
F = 10.0
R = 27.5
R = reel
I = 15.0
W = 37.5
Lead spacing (mm)
Lead length (mm) – (Applies to bulk
packaging only. Omit for standard lead
length 4-6mm.)
L = 24-27
T = 3.5-4.0
V = 2.7-3.3
polypropylene film
aluminum layer deposited by evaporation
under vacuum.
Winding:
non-inductive type
Leads:
tinned wire
Protection:
plastic case, epoxy resin filled. Box
material is solvent resistant and flame
retardant according to UL94 V0
Marking:
manufacturer’s logo, series (R75),
dielectric code (MKP), capacitance,
tolerance, D.C. rated voltage,
manufacturing date code
Climatic category:
55/100/56 IEC 60068-1
Operating temperature range:
-55 to +105°C
Related documents:
IEC 60384-16; CECC 31200
Dielectric:
Plates:
8.
Internal code
Note:
Ammo-pack is the preferred packaging for taped version.
NISSEI-ARCOTRONICS
METALLIZED POLYPROPYLENE FILM
CAPACITOR
D.C. and PULSE APPLICATIONS
SERIES CODE:
R75
single sided metallized
polypropylene film
R75
MKP Series
1 section
(160Vdc)
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
0.027µF 4.0 9.0 10.5 7.5 100 32 E3
0.033µF 4.0 9.0 10.5 7.5 100 32 E3
0.039µF 4.0 9.0 10.5 7.5 100 32 E3
0.047µF 4.0 9.0 10.5 7.5 100 32 E3
0.056µF 4.0 9.0 10.5 7.5 100 32 E3
0.068µF 4.0 9.0 10.5 7.5 100 32 E3
0.082µF 5.0 11.0 10.5 7.5 100 32 E3
5.0 11.0 10.5 7.5 100 32 E3
0.10µF
6.0 12.0 10.5 7.5 100 32 E3
0.12µF
6.0 12.0 10.5 7.5 100 32 E3
0.15µF
25 E3
0.047µF 4.0 9.0 13.0 10.0 80
25 E3
0.056µF 4.0 9.0 13.0 10.0 80
25 E3
0.068µF 4.0 9.0 13.0 10.0 80
25 E3
0.082µF 4.0 9.0 13.0 10.0 80
5.0 11.0 13.0 10.0 80
25 E3
0.10µF
5.0 11.0 13.0 10.0 80
25 E3
0.12µF
5.0 11.0 13.0 10.0 80
25 E3
0.15µF
6.0 12.0 13.0 10.0 80
25 E3
0.18µF
5.0 11.0 18.0 15.0 100 32 E3
0.18µF
5.0 11.0 18.0 15.0 100 32 E3
0.22µF
6.0 12.0 18.0 15.0 100 32 E3
0.27µF
6.0 12.0 18.0 15.0 100 32 E3
0.33µF
7.5 13.5 18.0 15.0 100 32 E3
0.39µF
7.5 13.5 18.0 15.0 100 32 E3
0.47µF
8.5 14.5 18.0 15.0 100 32 E3
0.56µF
8.5 14.5 18.0 15.0 100 32 E3
0.68µF
Tolerance: J (± 5%); K (±10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
160Vdc/90Vac
Rated
Cap.
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
7.0 16.0 26.5 22.5 60
19 E3
0.82µF
7.0 16.0 26.5 22.5 60
19 E3
1.0µF
8.5 17.0 26.5 22.5 60
19 E3
1.2µF
10.0 18.5 26.5 22.5 60
19 E3
1.5µF
10.0 18.5 26.5 22.5 60
19 E3
1.8µF
10.0 20.0 32.0 27.5 50
16 E3
2.2µF
11.0 20.0 32.0 27.5 50
16 E3
2.7µF
13.0 22.0 32.0 27.5 50
16 E3
*3.3µF
13.0 22.0 32.0 27.5 50
16 E3
*3.9µF
15.0 24.5 32.0 27.5 50
16 E3
*4.7µF
14.0 28.0 32.0 27.5 50
16 E3
*5.6µF
18.0 33.0 32.0 27.5 50
16 E3
*6.8µF
18.0 33.0 32.0 27.5 50
16 E3
*8.2µF
16 E3
*10.0µF 22.0 37.0 32.0 27.5 50
11 E3
12.0µF 19.0 32.0 41.5 37.5 35
11 E3
15.0µF 20.0 40.0 41.5 37.5 35
11 E3
18.0µF 20.0 40.0 41.5 37.5 35
11 E3
22.0µF 24.0 44.0 41.5 37.5 35
Tolerance: J (± 5%); K (±10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
160Vdc/90Vac
Rated
Cap.
Part Number
R75273-160-D-
R75333-160-D-
R75393-160-D-
R75473-160-D-
R75563-160-D-
R75683-160-D-
R75823-160-D-
R75104-160-D-
R75124-160-D-
R75154-160-D-
R75473-160-F-
R75563-160-F-
R75683-160-F-
R75823-160-F-
R75104-160-F-
R75124-160-F-
R75154-160-F-
R75184-160-F-
R75184-160-I-
R75224-160-I-
R75274-160-I-
R75334-160-I-
R75394-160-I-
R75474-160-I-
R75564-160-I-
R75684-160-I-
Part Number
R75824-160-N-
R75105-160-N-
R75125-160-N-
R75155-160-N-
R75185-160-N-
R75225-160-R-
R75275-160-R-
R75335-160-R-
R75395-160-R-
R75475-160-R-
R75565-160-R-
R75685-160-R-
R75825-160-R-
R75106-160-R-
R75126-160-W-
R75156-160-W-
R75186-160-W-
R75226-160-W-
*
These values are available in pitch 37.5mm upon
request.
All dimensions are in mm.
Note:
If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case
the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V. The
pulse characteristic K
0
depends on the voltage waveform and in any case it cannot exceed the value given in the
above table. The dv/dt test is carried out at 2 times the above values.
NISSEI-ARCOTRONICS
METALLIZED POLYPROPYLENE FILM
CAPACITOR
D.C. and PULSE APPLICATIONS
SERIES CODE:
R75
single sided metallized
polypropylene film
R75
MKP Series
1 section
(250Vdc)
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
4.0
9.0 10.5 7.5 225 115 E3
0.015µF
4.0
9.0 10.5 7.5 225 115 E3
0.018µF
4.0
9.0 10.5 7.5 225 115 E3
0.022µF
5.0 11.0 10.5 7.5 225 115 E3
0.027µF
5.0 11.0 10.5 7.5 225 115 E3
0.033µF
6.0 12.0 10.5 7.5 225 115 E3
0.039µF
6.0 12.0 10.5 7.5 225 115 E3
0.047µF
6.0 12.0 10.5 7.5 225 115 E3
0.056µF
4.0
9.0 13.0 10.0 125 65 E3
0.022µF
4.0
9.0 13.0 10.0 125 65 E3
0.027µF
4.0
9.0 13.0 10.0 125 65 E3
0.033µF
4.0
9.0 13.0 10.0 125 65 E3
0.039µF
5.0 11.0 13.0 10.0 125 65 E3
0.047µF
5.0 11.0 13.0 10.0 125 65 E3
0.056µF
6.0 12.0 13.0 10.0 125 65 E3
0.068µF
6.0 12.0 13.0 10.0 125 65 E3
0.082µF
6.0 12.0 13.0 10.0 125 65 E3
0.10µF
5.0 11.0 18.0 15.0 200 100 E3
0.12µF
5.0 11.0 18.0 15.0 200 100 E3
0.15µF
5.0 11.0 18.0 15.0 200 100 E3
0.18µF
5.0 11.0 18.0 15.0 200 100 E3
0.22µF
6.0 12.0 18.0 15.0 200 100 E3
0.27µF
6.0 12.0 18.0 15.0 200 100 E3
0.33µF
7.5 13.5 18.0 15.0 200 100 E3
0.39µF
7.5 13.5 18.0 15.0 200 100 E3
0.47µF
7.5 13.5 18.0 15.0 200 100 E3
0.56µF
8.5 14.5 18.0 15.0 200 100 E3
0.68µF
10.0 16.0 18.0 15.0 200 100 E3
0.82µF
10.0 16.0 18.0 15.0 200 100 E3
1.0µF
Tolerance: J (± 5%); K (±10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
250Vdc/160Vac
Rated
Cap.
Part Number
R75153-250-D-
R75183-250-D-
R75223-250-D-
R75273-250-D-
R75333-250-D-
R75393-250-D-
R75473-250-D-
R75563-250-D-
R75223-250-F-
R75273-250-F-
R75333-250-F-
R75393-250-F-
R75473-250-F-
R75563-250-F-
R75683-250-F-
R75823-250-F-
R75104-250-F-
R75124-250-I-
R75154-250-I-
R75184-250-I-
R75224-250-I-
R75274-250-I-
R75334-250-I-
R75394-250-I-
R75474-250-I-
R75564-250-I-
R75684-250-I-
R75824-250-I-
R75105-250-I-
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
6.0 15.0 26.5 22.5 125 63 E3
0.39µF
6.0 15.0 26.5 22.5 125 63 E3
0.47µF
6.0 15.0 26.5 22.5 125 63 E3
0.56µF
6.0 15.0 26.5 22.5 125 63 E3
0.68µF
7.0 16.0 26.5 22.5 125 63 E3
0.82µF
7.0 16.0 26.5 22.5 125 63 E3
1.0µF
8.5 17.0 26.5 22.5 125 63 E3
1.2µF
10.0 18.5 26.5 22.5 125 63 E3
1.5µF
10.0 18.5 26.5 22.5 125 63 E3
1.8µF
11.0 20.0 26.5 22.5 125 63 E3
2.2µF
9.0 17.0 32.0 27.5 100 50 E3
1.2µF
9.0 17.0 32.0 27.5 100 50 E3
1.5µF
9.0 17.0 32.0 27.5 100 50 E3
1.8µF
10.0 20.0 32.0 27.5 100 50 E3
2.2µF
11.0 20.0 32.0 27.5 100 50 E3
2.7µF
*3.3µF 13.0 22.0 32.0 27.5 100 50 E3
*3.9µF 13.0 22.0 32.0 27.5 100 50 E3
*4.7µF 15.0 24.5 32.0 27.5 100 50 E3
*5.6µF 14.0 28.0 32.0 27.5 100 50 E3
*6.8µF 18.0 33.0 32.0 27.5 100 50 E3
*8.2µF 18.0 33.0 32.0 27.5 100 50 E3
*10.0µF 22.0 37.0 32.0 27.5 100 50 E3
*12.0µF 22.0 37.0 32.0 27.5 100 50 E3
50 E3
15.0µF 20.0 40.0 41.5 37.5 35
50 E3
18.0µF 20.0 40.0 41.5 37.5 35
50 E3
22.0µF 24.0 44.0 41.5 37.5 35
Tolerance: J (± 5%); K (±10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
250Vdc/160Vac
Rated
Cap.
Part Number
R75394-250-N-
R75474-250-N-
R75564-250-N-
R75684-250-N-
R75824-250-N-
R75105-250-N-
R75125-250-N-
R75155-250-N-
R75185-250-N-
R75225-250-N-
R75125-250-R-
R75155-250-R-
R75185-250-R-
R75225-250-R-
R75275-250-R-
R75335-250-R-
R75395-250-R-
R75475-250-R-
R75565-250-R-
R75685-250-R-
R75825-250-R-
R75106-250-R-
R75126-250-R-
R75156-250-W-
R75186-250-W-
R75226-250-W-
*
These values are available in pitch 37.5mm upon
request.
All dimensions are in mm.
Note:
If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case
the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V. The
pulse characteristic K
0
depends on the voltage waveform and in any case it cannot exceed the value given in the
above table. The dv/dt test is carried out at 2 times the above values.
NISSEI-ARCOTRONICS
METALLIZED POLYPROPYLENE FILM
CAPACITOR
D.C. and PULSE APPLICATIONS
SERIES CODE:
R75
single sided metallized
polypropylene film
R75
MKP Series
1 section
(400Vdc)
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
4.0
9.0 10.5 7.5 250 200 E3
5600ρF
4.0
9.0 10.5 7.5 250 200 E3
6800ρF
4.0
9.0 10.5 7.5 250 200 E3
8200ρF
4.0
9.0 10.5 7.5 250 200 E3
0.010µF
4.0
9.0 10.5 7.5 250 200 E3
0.012µF
5.0 11.0 10.5 7.5 250 200 E3
0.015µF
5.0 11.0 10.5 7.5 250 200 E3
0.018µF
6.0 12.0 10.5 7.5 250 200 E3
0.022µF
6.0 12.0 10.5 7.5 250 200 E3
0.027µF
4.0
9.0 13.0 10.0 175 140 E3
0.010µF
4.0
9.0 13.0 10.0 175 140 E3
0.012µF
4.0
9.0 13.0 10.0 175 140 E3
0.015µF
4.0
9.0 13.0 10.0 175 140 E3
0.018µF
5.0 11.0 13.0 10.0 175 140 E3
0.022µF
5.0 11.0 13.0 10.0 175 140 E3
0.027µF
6.0 12.0 13.0 10.0 175 140 E3
0.033µF
6.0 12.0 13.0 10.0 175 140 E3
0.039µF
6.0 12.0 13.0 10.0 175 140 E3
0.047µF
5.0 11.0 18.0 15.0 300 240 E3
0.068µF
5.0 11.0 18.0 15.0 300 240 E3
0.082µF
5.0 11.0 18.0 15.0 300 240 E3
0.10µF
6.0 12.0 18.0 15.0 300 240 E3
0.12µF
6.0 12.0 18.0 15.0 300 240 E3
0.15µF
7.5 13.5 18.0 15.0 300 240 E3
0.18µF
7.5 13.5 18.0 15.0 300 240 E3
0.22µF
8.5 14.5 18.0 15.0 300 240 E3
0.27µF
10.0 16.0 18.0 15.0 300 240 E3
0.33µF
10.0 16.0 18.0 15.0 300 240 E3
0.39µF
Tolerance: J (± 5%); K (±10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
400Vdc/220Vac**
Rated
Cap.
Part Number
R75562-400-D-
R75682-400-D-
R75822-400-D-
R75103-400-D-
R75123-400-D-
R75153-400-D-
R75183-400-D-
R75223-400-D-
R75273-400-D-
R75103-400-F-
R75123-400-F-
R75153-400-F-
R75183-400-F-
R75223-400-F-
R75273-400-F-
R75333-400-F-
R75393-400-F-
R75473-400-F-
R75683-400-I-
R75823-400-I-
R75104-400-I-
R75124-400-I-
R75154-400-I-
R75184-400-I-
R75224-400-I-
R75274-400-I-
R75334-400-I-
R75394-400-I-
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
6.0 15.0 26.5 22.5 180 144 E3
0.27µF
6.0 15.0 26.5 22.5 180 144 E3
0.33µF
7.0 16.0 26.5 22.5 180 144 E3
0.39µF
7.0 16.0 26.5 22.5 180 144 E3
0.47µF
8.5 17.0 26.5 22.5 180 144 E3
0.56µF
0.68µF 10.0 18.5 26.5 22.5 180 144 E3
0.82µF 10.0 18.5 26.5 22.5 180 144 E3
11.0 20.0 26.5 22.5 180 144 E3
1.0µF
9.0 17.0 32.0 27.5 130 104 E3
0.56µF
9.0 17.0 32.0 27.5 130 104 E3
0.68µF
9.0 17.0 32.0 27.5 130 104 E3
0.82µF
10.0 20.0 32.0 27.5 130 104 E3
1.0µF
*1.2µF 11.0 20.0 32.0 27.5 130 104 E3
*1.5µF 13.0 22.0 32.0 27.5 130 104 E3
*1.8µF 13.0 22.0 32.0 27.5 130 104 E3
*2.2µF 15.0 24.5 32.0 27.5 130 104 E3
*2.7µF 14.0 28.0 32.0 27.5 130 104 E3
*3.3µF 18.0 33.0 32.0 27.5 130 104 E3
*3.9µF 18.0 33.0 32.0 27.5 130 104 E3
*4.7µF 22.0 37.0 32.0 27.5 130 104 E3
*5.6µF 22.0 37.0 32.0 27.5 130 104 E3
19.0 32.0 41.5 37.5 70
56 E3
6.8µF
20.0 40.0 41.5 37.5 70
56 E3
8.2µF
24.0 44.0 41.5 37.5 70
56 E3
10µF
Tolerance: J (± 5%); K (±10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
400Vdc/220Vac**
Rated
Cap.
Part Number
R75274-400-N-
R75334-400-N-
R75394-400-N-
R75474-400-N-
R75564-400-N-
R75684-400-N-
R75824-400-N-
R75105-400-N-
R75564-400-R-
R75684-400-R-
R75824-400-R-
R75105-400-R-
R75125-400-R-
R75155-400-R-
R75185-400-R-
R75225-400-R-
R75275-400-R-
R75335-400-R-
R75395-400-R-
R75475-400-R-
R75565-400-R-
R75685-400-W-
R75825-400-W-
R75106-400-W-
*
**
These values are available in pitch 37.5mm upon
request.
Not suitable for across-the-line applications. Please
refer to Interference Suppression Capacitors.
All dimensions are in mm.
Note:
If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case
the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V. The
pulse characteristic K
0
depends on the voltage waveform and in any case it cannot exceed the value given in the
above table. The dv/dt test is carried out at 2 times the above values.
NISSEI-ARCOTRONICS
METALLIZED POLYPROPYLENE FILM
CAPACITOR
D.C. and PULSE APPLICATIONS
SERIES CODE:
R75
single sided metallized
polypropylene film
R75
MKP Series
1 section
(630Vdc)
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
4.0
9.0 10.5 7.5 300 380 E3
1000ρF
4.0
9.0 10.5 7.5 300 380 E3
1200ρF
4.0
9.0 10.5 7.5 300 380 E3
1500ρF
4.0
9.0 10.5 7.5 300 380 E3
1800ρF
4.0
9.0 10.5 7.5 300 380 E3
2200ρF
4.0
9.0 10.5 7.5 300 380 E3
2700ρF
4.0
9.0 10.5 7.5 300 380 E3
3300ρF
4.0
9.0 10.5 7.5 300 380 E3
3900ρF
4.0
9.0 10.5 7.5 300 380 E3
4700ρF
5.0 11.0 10.5 7.5 300 380 E3
5600ρF
5.0 11.0 10.5 7.5 300 380 E3
6800ρF
5.0 11.0 10.5 7.5 300 380 E3
8200ρF
6.0 12.0 10.5 7.5 300 380 E3
0.010µF
6.0 12.0 10.5 7.5 300 380 E3
0.012µF
4.0
9.0 13.0 10.0 250 315 E3
1000ρF
4.0
9.0 13.0 10.0 250 315 E3
1200ρF
4.0
9.0 13.0 10.0 250 315 E3
1500ρF
4.0
9.0 13.0 10.0 250 315 E3
1800ρF
4.0
9.0 13.0 10.0 250 315 E3
2200ρF
4.0
9.0 13.0 10.0 250 315 E3
2700ρF
4.0
9.0 13.0 10.0 250 315 E3
3300ρF
4.0
9.0 13.0 10.0 250 315 E3
3900ρF
4.0
9.0 13.0 10.0 250 315 E3
4700ρF
4.0
9.0 13.0 10.0 250 315 E3
5600ρF
4.0
9.0 13.0 10.0 250 315 E3
6800ρF
4.0
9.0 13.0 10.0 250 315 E3
8200ρF
5.0 11.0 13.0 10.0 250 315 E3
0.010µF
5.0 11.0 13.0 10.0 250 315 E3
0.012µF
6.0 12.0 13.0 10.0 250 315 E3
0.015µF
6.0 12.0 13.0 10.0 250 315 E3
0.018µF
Tolerance: J (± 5%); K (±10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
630Vdc/250Vac**
Rated
Cap.
Part Number
R75102-630-D-
R75122-630-D-
R75152-630-D-
R75182-630-D-
R75222-630-D-
R75272-630-D-
R75332-630-D-
R75392-630-D-
R75472-630-D-
R75562-630-D-
R75682-630-D-
R75822-630-D-
R75103-630-D-
R75123-630-D-
R75102-630-F-
R75122-630-F-
R75152-630-F-
R75182-630-F-
R75222-630-F-
R75272-630-F-
R75332-630-F-
R75392-630-F-
R75472-630-F-
R75562-630-F-
R75682-630-F-
R75822-630-F-
R75103-630-F-
R75123-630-F-
R75153-630-F-
R75183-630-F-
Max
Max K
0
dv/dt
B
H
L
P (V/µs) (V
2
/µs)
0.022µF 5.0 11.0 18.0 15.0 400 504 E3
0.027µF 5.0 11.0 18.0 15.0 400 504 E3
0.033µF 5.0 11.0 18.0 15.0 400 504 E3
0.039µF 5.0 11.0 18.0 15.0 400 504 E3
0.047µF 5.0 11.0 18.0 15.0 400 504 E3
0.056µF 5.0 11.0 18.0 15.0 400 504 E3
0.068µF 6.0 12.0 18.0 15.0 400 504 E3
0.082µF 6.0 12.0 18.0 15.0 400 504 E3
7.5 13.5 18.0 15.0 400 504 E3
0.10µF
7.5 13.5 18.0 15.0 400 504 E3
0.12µF
8.5 14.5 18.0 15.0 400 504 E3
0.15µF
0.18µF 10.0 16.0 18.0 15.0 400 504 E3
0.22µF 10.0 16.0 18.0 15.0 400 504 E3
6.0 15.0 26.5 22.5 250 315 E3
0.12µF
6.0 15.0 26.5 22.5 250 315 E3
0.15µF
7.0 16.0 26.5 22.5 250 315 E3
0.18µF
7.0 16.0 26.5 22.5 250 315 E3
0.22µF
8.5 17.0 26.5 22.5 250 315 E3
0.27µF
0.33µF 10.0 18.5 26.5 22.5 250 315 E3
0.39µF 10.0 18.5 26.5 22.5 250 315 E3
0.47µF 11.0 20.0 26.5 22.5 250 315 E3
0.56µF 11.0 20.0 26.5 22.5 250 315 E3
0.39µF 11.0 20.0 32.0 27.5 180 227 E3
0.47µF 11.0 20.0 32.0 27.5 180 227 E3
0.56µF 11.0 20.0 32.0 27.5 180 227 E3
*0.68µF 11.0 20.0 32.0 27.5 180 227 E3
*0.82µF 13.0 22.0 32.0 27.5 180 227 E3
*1.0µF 13.0 22.0 32.0 27.5 180 227 E3
*1.2µF 15.0 24.5 32.0 27.5 180 227 E3
*1.5µF 14.0 28.0 32.0 27.5 180 227 E3
*1.8µF 18.0 33.0 32.0 27.5 180 227 E3
*2.2µF 18.0 33.0 32.0 27.5 180 227 E3
*2.7µF 22.0 37.0 32.0 27.5 180 227 E3
*3.3µF 22.0 37.0 32.0 27.5 180 227 E3
20.0 40.0 41.5 37.5 90 113 E3
3.9µF
20.0 40.0 41.5 37.5 90 113 E3
4.7µF
24.0 44.0 41.5 37.5 90 113 E3
5.6µF
Tolerance: J (± 5%); K (±10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3)
Omit for standard (4-6)
630Vdc/250Vac**
Rated
Cap.
Part Number
R75223-630-I-
R75273-630-I-
R75333-630-I-
R75393-630-I-
R75473-630-I-
R75563-630-I-
R75683-630-I-
R75823-630-I-
R75104-630-I-
R75124-630-I-
R75154-630-I-
R75184-630-I-
R75224-630-I-
R75124-630-N-
R75154-630-N-
R75184-630-N-
R75224-630-N-
R75274-630-N-
R75334-630-N-
R75394-630-N-
R75474-630-N-
R75564-630-N-
R75394-630-R-
R75474-630-R-
R75564-630-R-
R75684-630-R-
R75824-630-R-
R75105-630-R-
R75125-630-R-
R75155-630-R-
R75185-630-R-
R75225-630-R-
R75275-630-R-
R75335-630-R-
R75395-630-W-
R75475-630-W-
R75565-630-W-
All dimensions are in mm.
*
**
These values are available in pitch 37.5mm upon
request.
Not suitable for across-the-line applications. Please
refer to Interference Suppression Capacitors.
Note:
If the working voltage (V) is lower than the rated voltage (V
R
), the capacitor may work at higher dv/dt. In this case
the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V
R
/V. The
pulse characteristic K
0
depends on the voltage waveform and in any case it cannot exceed the value given in the
above table. The dv/dt test is carried out at 2 times the above values.
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
