AMP Duoplug 2,5 MK II selektive loaded
Parameter Name | Attribute value |
Connector System | wire to board |
Connector type | female end |
Connectors and terminals terminate to | A printed circuit board |
Connector type | card edge |
Connector type | Connector components |
Cable type | Stranded wire |
Number of Positions | 9 |
Rows | 1 |
Connector terminal load status | selective loading |
PCB mounting direction | right angle |
Pre-installed | yes |
Card entry method | side |
Support | Without |
pre-assembled | yes |
hot swap | no |
Operating Voltage | 250 V |
Cable exit angle | 90° |
Terminal base material | CuS |
Contact Current Rating (Max) (A) | 2 |
Terminal contact plating material | tin |
Terminal contact plating thickness (µm) | 3 – 6 |
Terminal termination area plating material | tin |
Terminal type | socket |
Cable termination method | Piercing crimping (IDC) |
PCB installation and fixation | Without |
Panel mount features | Without |
Terminal retention type | lock gun |
Lock clip position | none |
Connector mounting type | Cable installation |
Terminal positioning force | with |
joint fixation | Without |
Joint alignment type | keying |
joint alignment | with |
Centerline (Pitch) | 2.5 mm [ .098 in ] |
Shell color | nature |
Shell material | PA 6 GF |
end cap | Without |
Shell type | closed end |
PCB thickness (recommended) | 1.5 mm [ .059 in ] |
Cable size | 24 – 22 AWG [ .22 – .35 mm² ] |
high | 7.3 mm [ .287 in ] |
Acceptable wire insulation diameter range | 1.2 – 1.6 mm [ .047 – .063 in ] |
Working group temperature range | -40 – 110 °C [ -40 – 230 °F ] |
Circuit Application | Signal |
Applicable to | PCB frame, male header |
Package quantity | 6160 |
Encapsulation method | box |