Parallel - Fundamental Quartz Crystal, 54MHz Nom, SMD, 4 PIN
ABM81-54.000MHZ-18-3Y-T2 Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206908649
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.33
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.003%
frequency tolerance
25 ppm
JESD-609 code
e4
load capacitance
18 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
54 MHz
Maximum operating temperature
60 °C
Minimum operating temperature
-10 °C
physical size
3.2mm X 2.5mm X 0.65mm
Series resistance
35 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM81-54.000MHZ-18-3Y-T2 Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
I got a JLink today, the model parameters are as shown below.However, there was a problem. After connecting to JLink, it always prompted that the version was too low and needed to be upgraded. As soon...
[i=s]This post was last edited by Fengmangbulou on 2019-6-20 17:46[/i]Ordinary stepper motors will not self-lock when the power is off, but will self-lock when the power is on. To achieve self-locking...
Synchronous buck converters have gained acceptance as isolated bias supplies in the communications and industrial markets. The isolated buck converter, or Fly-Buck converter as it is commonly called, ...
The need for speed, capacity, performance and reliability
The popularity of video, music, gaming and online media content consumption has led to a demand for faster cable speeds and higher capacity da...
What is Da Vinci Technology?TI's official website has a detailed introduction to Da Vinci technology. Da Vinci technology is not only a DSP+ARM dual-core architecture SOC chip, it also includes a comp...
Model: MYD-YT507-8E1D-150-I (industrial grade), value 650 yuan
Quantity: 3 sets
The MYC-YT507 core board is based on the Allwinner automotive-grade T507 processor, which integrates a quad-core Cortex-...
Water quality analyzer
It is a commonly used testing instrument, suitable for environmental testing stations, municipal water treatment processes, municipal pipe network water quality supervision, ru...[Details]
Infineon Technologies uses recyclable printed circuit boards from Jiva Materials to minimize electronic waste and carbon footprint for demo and evaluation boards
Wit...[Details]
USART1 needs to be configured in advance, which is quite troublesome. After configuration, I found that even if I use HAL function to send statements, I have to define them in string form in advance,...[Details]
Apple’s top chip executive revealed the company has begun making its own cellular modems for future devices, a move that will replace Qualcomm’s components, Bloomberg reported on December 11. J...[Details]
In daily production and life, many occasions such as car reversing, robot obstacle avoidance, industrial well logging, reservoir level measurement, etc. require automatic non-contact distance measu...[Details]
introduction
Belt drive is a common transmission device used in industrial production. Its commonly used speed detection device is a photoelectric encoder installed at the rotating end of ...[Details]
The new iPhone 14 series will officially be released in September, and Foxconn has already started trial production. Recently, a research report from TrendForce showed that this year's iPhon...[Details]
Wi-Fi 6, also known as 802.11ax, is a router that makes Wi-Fi faster and has better connections. Sounds pretty good, right? So we've seen Wi-Fi 6 routers for sale in stores. These new routers seem to...[Details]
U.S. Commerce Secretary Gina Raimondo said on the 29th that after the United States requested global companies to provide chip market information, it has received voluntary responses from more than 1...[Details]
1. System bus timing diagram 2. Analysis At the beginning of the first clock cycle, the system address bus gives the address of the storage space to be accessed. After the Tacs time, the chip selec...[Details]
According to foreign media reports, indie Semiconductor, a developer of automotive semiconductors and software platforms, recently released a series of highly integrated and flexible solutions that c...[Details]
The power supply test market has always played an important role in the measurement market and has attracted the investment of many measurement instrument manufacturers. In order to consolidate its c...[Details]
The development direction of power supply can be summarized into three aspects: first, miniaturization; second, high efficiency and high reliability; third, intelligence or digitization. Among them...[Details]
1. Background
Modbus and Profibus are two commonly used communication protocols in industrial control systems. They play an important role in the field of automation. Modbus is a serial commun...[Details]