PoE Giga-McBasic
PoE+ Giga-McBasic
with LFPT
Operation Manual
PoE Giga-McBasic LFPT & PoE+ Giga McBasic LFPT
© 2013 B&B Electronics – Revised Feb 2014
Document Number: 52-80916-00_001
This product was designed and manufactured in Ottawa, Illinois, USA, using domestic and imported parts by
International Headquarters
B&B Electronics Mfg. Co. Inc.
707 Dayton Road
Ottawa, IL 61350 USA
Phone
(815) 433-5100 --
General Fax
(815) 433-5105
Ottawa Tech Support:
support@bb-elec.com
European Headquarters
B&B Electronics Ltd.
Westlink Commercial Park
Oranmore, Co. Galway, Ireland
Phone
+353 91-792444 --
Fax
+353 91-792445
EU tech support:
techSupport@bb-elec.com
Website: www.bb-elec.com
2013B&B
Electronics Mfg. Co. Inc. No part of this publication may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photography, recording, or any information storage and
retrieval system without written consent. Information in this manual is subject to change without notice, and does
not represent a commitment on the part of B&B Electronics Mfg. Co. Inc.
B&B Electronics Mfg. Co. Inc. shall not be liable for incidental or consequential damages resulting from the
furnishing, performance, or use of this manual.
All brand names used in this manual are the registered trademarks of their respective owners. The use of
trademarks or other designations in this publication is for reference purposes only and does not constitute an
endorsement by the trademark holder.
2
www.bb-elec.com
CONTENTS
Introduction PoE Giga-McBasic .....................................................................................................................................4
About the PoE Giga-McBasic LFPT .........................................................................................................................4
Installation .............................................................................................................................................................5
DIP Switch Configuration for PoE Giga-McBasic LFPT SFP & 1x9 ...........................................................................5
PoE Reset DSW ......................................................................................................................................................5
LFPT DSW for PoE Giga-McBasic LFPT ...................................................................................................................5
LED Operation for PoE Giga-McBasic LFPT SFP and 1x9 ........................................................................................6
Troubleshooting.....................................................................................................................................................8
RJ-45 Pinouts .........................................................................................................................................................8
Specifications for the PoE Giga-McBasic LFPT .......................................................................................................9
Introduction PoE+ Giga-McBasic LFPT .........................................................................................................................10
About the PoE+ Giga-McBasic LFPT ....................................................................................................................10
Installation ...........................................................................................................................................................11
DIP Switch Configuration PoE+ Giga-McBasic LFPT SFP & 1x9 ............................................................................11
PoE Reset DSW ....................................................................................................................................................11
LFPT DSW for PoE+ Giga-McBasic LFPT ...............................................................................................................11
LED Operation PoE+ Giga-McBasic LFPT SFP and 1x9..........................................................................................12
Troubleshooting...................................................................................................................................................14
RJ-45 Pinouts .......................................................................................................................................................14
Specifications for the PoE+ Giga-McBasic LFPT ..................................................................................................15
PoE Precautions (For Inside-a-Building Installation ONLY) ..................................................................................16
Fiber Optic Cleaning Guidelines ...........................................................................................................................16
Electrostatic Discharge Precautions ....................................................................................................................16
Safety Certifications .............................................................................................................................................17
3
www.bb-elec.com
INTRODUCTION PoE GIGA-McBASIC
ABOUT THE PoE GIGA-McBASIC LFPT
The PoE Giga-McBasic is a solution for private network applications that require power over Ethernet for
installations inside buildings where PoE is required to power an Ethernet device. The standalone unit offers a
model with one SFP or fixed fiber transceiver, 1x9, uplink for the network connection, one PSE 10/100/1000Base-T
copper port that provides Power-over-Ethernet (PoE) (IEEE802.3af), and one 10/100/ 1000Mbps copper port, to
connect a non-PoE unit to the same fiber uplink. As a fiber-fed demarcation unit, it provides both power and data
to a remote device over a standard CAT5 copper line, eliminating the need for a power connection to the remote
device. The PoE Giga-McBasic LFPT provides up to 15.4 watts on one copper port, and is powered by an internal
power supply, supporting 100-240 VAC. For more robust power requirements on both copper ports, refer to the
information about the PoE+ Giga-McBasic LFPT.
NOTE
Unless noted otherwise, any reference is applicable for both the 1x9 and SFP version of the
PoE Giga-McBasic LFPT
in this
manual.
The PoE Giga-McBasic LFPT is a solution for private network applications that require power over Ethernet for
locations inside buildings where PoE is required to power an Ethernet device. The standalone unit offers a model
with one SFP or fixed fiber transceiver, 1x9, uplink for the network connection, one PSE 10/100/1000Base-T copper
port that provides PoE (IEEE802.3af), and one 10/100/1000Mbps copper port. As a fiber-fed demarcation unit, it
provides both power and data to a remote device over a standard CAT5 copper line, eliminating the need for a
power connection to the remote device. The PoE Giga-McBasic LFPT provisions up to 15.4 watts on one copper
port, and can be powered by an external AC adapter or DC terminal block. For more robust power requirements
on both copper ports, please refer to the information about the PoE+ Giga-McBasic LFPT.
The SFP uplink can support fiber or copper SFPs. The fiber SFP, available in SC or LC connectors, supports 100FDX
or 1000FDX; a copper SFP supports the SGMII interface (10/100/1000Mbps). The SFP, with or without DDMI, is
available for purchase through B&B Electronics Distributors. The SFP must be MSA-compliant.
The copper ports auto negotiate to the connected device’s speed and duplex mode: 10 Mbps, 100 Mbps or 1000
Mbps, and HDX or FDX (including Flow Control). The
PoE+ Giga-McBasic LFPT supports jumbo frames up to 10240.
4
www.bb-elec.com
INSTALLATION
PoE Giga-McBasic LFPT installs virtually anywhere: as a standalone, table-top device, with rackmount ears,or using
a Wallmount bracket. The rackmount ears and wallmount bracket are optional accessories available through B&B
Electronics distributors.
Installation Tip
Several models of the PoE Giga-McBasic LFPT support single-strand fiber for operation. Since single-strand fiber products use
optics that transmit and receive on two different wavelengths, single-strand fiber products must be deployed in pairs. For
example, connect a PoE Giga-McBasic LFPT , TX/SSLX-SM1310-SC (which has 1310 xmt and 1550 rcv) to a product which has
1550 xmt and 1310 rcv, e.g. PoE Giga-McBasic LFPT, TX/SSLX-SM1550-SC. The two connected products must also have the
same speed and distance capabilities (i.e. both are single-mode [20km] or both are single/PLUS [40km]).
DIP SWITCH CONFIGURATION FOR PoE GIGA-McBASIC LFPT SFP & 1X9
DIP Switch
1
2
3
4
5
6
7
8
Name
PoE Reset
LFPT Port 1
LFPT Port 2
Factory Set
Factory Set
Factory Set
Factory Set
Factory Set
Description
ON forces Port 2, PSE/PoE, to OFF on
LOS of Fiber input
ON enables LFPT for Port 1 and the FX
Port
ON enables LFPT for Port 2 and the FX
Port
Do not change
Do not change
Do not change
Do not change
Do not change
Default Setting
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
DIP Switch
POE RESET DSW
When set to ON, it will force the PSE output power on the copper port OFF when the LINK state is lost on the SFP
line (copper or fiber SFP). By default, the DSW is set to OFF.
LFPT DSW FOR PoE GIGA-McBASIC LFPT
The DIP Switches for LFPT is to allow a LOS fault to be passed through the unit. When enabled, if link is lost on the
FX port, the transmit on the TX port is disabled. If link is lost on a TX port, the transmit on the FX Port is disabled.
NOTE
With the fault switches – PoE Reset, LFPT Port1 and LFPT Port 2, only one fault condition is recognized at a time. The first fault
condition is in charge. So if TX Port1 has no link and then the FX Port loss link, the loss of TX Port 1 link causes the FX Port to
disable transmit.
5
www.bb-elec.com
PCB Design
京公网安备 11010802033920号
EEWORLD
