Parallel - Fundamental Quartz Crystal, 15.999MHz Nom, SMD, 4 PIN
ABM81-15.999MHZ-6-C2W-T2 Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206948655
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.2
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.0025%
frequency tolerance
20 ppm
JESD-609 code
e4
load capacitance
6 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
15.999 MHz
Maximum operating temperature
70 °C
Minimum operating temperature
-30 °C
physical size
3.2mm X 2.5mm X 0.65mm
Series resistance
120 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM81-15.999MHZ-6-C2W-T2 Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
When I was learning MSP430, I always couldn't remember many things. At the same time, the materials were in English, so I didn't really understand many things. Although I passed the CET-6, I still fel...
By Aaron Paxton, Texas Instruments In an LDO Basics blog post, I discussed using a low dropout regulator (LDO) to filter the ripple voltage caused by a switch-mode power supply. However, this is not t...
As portable medical devices have become a new growth trend, equipment manufacturers are looking for technologies and products that can reduce development difficulty and shorten time to market. TI's MS...
Since I am not very familiar with Bluetooth routines, I have been trying to add new functions through GATT, but I still have no idea. I also checked the evaluation requirements and it seems that today...
This is a very basic question, but I have read too many Baidu explanations and I am confused. I only know the approximate values. I would like to ask everyone, how to calculate the specific calculatio...
I recently bought some new audio-visual equipment for my home, including a SONY 77-inch A80J sub-flagship OLED TV, a SONY PS5, and a Kaiboer Q70 hard drive player. As an audio-visual enthusiast, watch...
When the system is running the main program normally, if there is suddenly an important task to be processed immediately, the system will save the current work and then process this task. After comple...[Details]
1 Introduction
There are many electronic control units in electric vehicles, small internal space, and large environmental interference, which puts higher requirements on the control system an...[Details]
E3 fully demonstrates this point - games are no longer limited to "playing", but competition and interaction with the community. As a technology leader in the PC gaming industry, Intel focuses on thr...[Details]
IC Insights will release its new 2021 McClean Report - "Global Semiconductor Industry Comprehensive Analysis and Forecast" later this month. Part of the new report will study chapters divided by regi...[Details]
A Bode plot with three poles and one zero will be used to analyze the gain and phase margin. Assuming a DC gain of 80dB, the first pole occurs at 100Hz. At this frequency, the slope of the gain curve...[Details]
On July 9, at the 3rd World Artificial Intelligence Conference, Musk said in a video speech, "Tesla's autonomous driving is building a relevant engineering team in China, and will do a lot of origina...[Details]
To ensure that various safety-critical systems can operate safely and work as needed, researchers at Michigan State University have developed a method to design safety controllers with learning capab...[Details]
Research shows that robot design is becoming more and more complex, but there is no robot that can simulate human typing on the market. The simulation robot recently released by IDC in the UK is the ...[Details]
1. Introduction
Fieldbus control system (FCS) is developed in response to intelligent field instruments. Its original intention was to replace 4-20mA analog transmission technology with digit...[Details]
Magnetic resonance (MR) wireless charging technology has begun to emerge in the market; industry players including MediaTek, WiTricity, ConvenientPower and MAPS (Mixed Analog Power Solution) have all...[Details]
Not long ago, OPPO's patent for a pop-up front camera with a polarized refractive prism was exposed, which aroused heated discussion among many netizens. While netizens were still discussing th...[Details]
As a protective device in the power transmission and distribution network
, the
power
circuit breaker (including frame circuit breaker and molded case circuit breaker) can safely and reliabl...[Details]
With the advent of blue LED, white LED can be easily obtained by combining phosphor and blue LED, which is the most mature white light packaging method in the industry. At present, white LED has bec...[Details]
I have been working on a project under Embedded Linux recently, and the platform is Friendly Arm Micro2440. However, sometimes I find that because the development board has been used for a long tim...[Details]
Yan'an High-tech Zone Investment Promotion Team went to Chengdu and Wenzhou to conduct investment promotion inspection activities. From October 14th to 19th, Qin Li, member of the Party Working Commit...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
