Parallel - Fundamental Quartz Crystal, 15.999MHz Nom, SMD, 4 PIN
ABM8-15.999MHZ-18-N1H-T3 Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206902540
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.23
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.0035%
frequency tolerance
10 ppm
JESD-609 code
e4
load capacitance
18 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
15.999 MHz
Maximum operating temperature
85 °C
Minimum operating temperature
-30 °C
physical size
3.2mm X 2.5mm X 0.8mm
Series resistance
120 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM8-15.999MHZ-18-N1H-T3 Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
[i=s]This post was last edited by qwqwqw2088 on 2020-2-25 08:29[/i]TI Power Management Experimenter Kit TI-PMLK LDO Experimenter Board Cost-Effective Testing Methodology (Rev. A)
[attach ]460501[/atta...
[size=4] In order to improve the transmission capacity of the bus, traditional buses are mostly implemented by increasing the width of the data bus or increasing the frequency of the bus. For example,...
I'm about to graduate from university, and I can't use my graduation project, so I'm going to make a board that I can't play with. I can also use an ESP32 board to replace it. Hehehe, my graduation pr...
Our company uses a servo motor driver in its testing machine products. But there is a problem, that is, the encoder has pulse output when the motor is not rotating. According to the manual, the freque...
This project proposes a better method for sewage treatment control systems with wide distribution and complex layout. It uses Mitsubishi Q series PLC and GPRS wireless communication technology to bui...[Details]
Pseudo-operations (derectives) are some special instruction mnemonics in ARM assembly language programs. Their main function is to make various preparations for completing the assembly program. The as...[Details]
Switching power supplies are widely used in communication, control, computer and other fields due to their small size and high power factor. However, due to the electromagnetic interference, their ...[Details]
In recent weeks, people familiar with the application process told Reuters that the United States has granted suppliers licenses authorizing them to sell chips used in auto parts such as video screen...[Details]
A multimeter can be used to determine whether a bidirectional thyristor is good or bad, but the specific parameters cannot be measured. The method of measuring with a multimeter is as follows: ...[Details]
Liquid Flow Energy Storage Technology Co., Ltd. (hereinafter referred to as Liquid Flow Energy Storage), located in the High-tech Zone, has become well-known in the liquid flow energy storage industry...[Details]
FCLK is used for CPU core
HCLK for AHB bus devices
PCLK due to the devices on the APB bus
The clock registers that need to be set for s3c2410 include: LOCKTIME, MPLLCON, and CLKDIVN.
You ca...[Details]
Create a new IAR project and transplant the ST32 firmware library to the project. If you compile directly, the header file will not be found. This is reasonable because we did not set the search path ...[Details]
The unit of magnetic beads is ohm, not hunter, so you should pay special attention to this. Because the unit of magnetic beads is nominal according to the impedance it produces at a certain frequenc...[Details]
Recently, Sino-Science Sodium Battery Co., Ltd. reached a cooperation agreement with Three Gorges Energy, Three Gorges Capital and the People's Government of Fuyang City, Anhui Province, to jointly b...[Details]
This problem occurs because only the function interface is declared in stm8s_conf.h, but there is no place to implement it, so just find a place to write an empty function. The common method is to wr...[Details]
IC Insights' latest report data shows that in 2019, China's IC production accounted for 15.7% of its nearly $125 billion IC market, only slightly higher than 15.1% five years ago (2014). As shown in ...[Details]
Power supply is an indispensable part of all electronic products. Power supply is divided into switching power supply, linear power supply and other types. Among them, switching power supply has be...[Details]
Earlier, it was reported that as trade tensions between the Trump administration and China escalate, according to people familiar with the matter, technology giant Apple is producing new Mac Pro comp...[Details]
1. Introduction to BMS system
The control system of new energy electric vehicles is mainly composed of a battery management system (BMS), a charger control unit, a motor control unit and a veh...[Details]