Ordering Information .................................................................................................................................................................... 2
Dimensions and Patterns ― 3.2 x 2.5 mm................................................................................................................................. 13
Dimensions and Patterns ― 5.0 x 3.2 mm................................................................................................................................. 13
Dimensions and Patterns ― 7.0 x 5.0 mm................................................................................................................................. 14
Additional Information ................................................................................................................................................................ 15
Revision History ......................................................................................................................................................................... 16
Rev 1.01
Page 2 of 18
www.sitime.com
SiT3342
1 MHz to 220 MHz Ultra-low Jitter, Endura™ Series Differential VCXO
Electrical Characteristics
Table 2. Electrical Characteristics – Common to LVPECL, LVDS and HCSL
All Min and Max limits in the Electrical Characteristics tables are specified over temperature and rated operating voltage with standard
output termination shown in the termination diagrams. Typical values are at 25°C and nominal supply voltage.
Parameter
Output Frequency Range
Frequency Stability
Symbol
f
F_stab
Min.
1
-15
-25
-35
-50
Operating Temperature Range
T_use
-20
-40
-40
-40
Acceleration (g) sensitivity,
Gamma Vector
Supply Voltage
F_g
–
Typ.
–
–
–
–
–
–
–
–
–
–
Max.
220
+15
+25
+35
+50
+70
+85
+95
+105
0.1
Unit
MHz
ppm
ppm
ppm
ppm
°C
°C
°C
°C
ppb/g
Extended Industrial
Low sensitivity grade; total gamma over 3 axes; 15 Hz to 2 kHz;
MIL-PRF-55310, computed per section 4.8.18.3.1
Extended Commercial
Industrial
Condition
Accurate to 6 decimal places
Inclusive of initial tolerance, operating temperature, rated power
supply voltage, load variations, and first year aging at 25°C,
with VIN voltage at Vdd/2.
±15
ppm is only guaranteed for pull range up to
±100
ppm.
Frequency Range
Frequency Stability
Temperature Range
Rugged Characteristics
Supply Voltage
Vdd
2.97
2.7
2.52
2.25
Pull Range
PR
3.3
3.0
2.8
2.5
3.63
3.3
3.08
2.75
V
V
V
V
ppm
See the APR (Absolute Pull Range)
Table 11.
Contact SiTime
for custom pull range options
Voltage at which maximum frequency deviation is guaranteed
Voltage at which minimum frequency deviation is guaranteed
Contact SiTime
for other input bandwidth options
Voltage Control Characteristics
±25, ±50, ±80, ±100, ±150,
±200, ±400, ±800, ±1600,
±3200
90%
–
–
–
–
–
–
10
10
–
–
10%
–
–
1.0
–
Input Characteristics
Input Voltage High
Input Voltage Low
Input Pull-up Impedance
Duty Cycle
Startup Time
OE Enable/Disable Time
VIH
VIL
Z_in
DC
T_start
T_oe
70%
–
–
45
–
–
–
–
100
–
–
–
–
30%
-
55
3.0
3.8
Vdd
Vdd
kΩ
%
ms
µs
Measured from the time Vdd reaches its rated minimum value
f = 156.25 MHz. Measured from the time OE pin reaches
rated VIH and VIL to the time clock pins reach 90% of swing
and high-Z. See
Figure 9
and
Figure 10
Pin 2, OE
Pin 2, OE
Pin 2, OE logic high or logic low
Upper Control Voltage
Lower Control Voltage
Control Voltage Input Impedance
Control Voltage Input Bandwidth
Pull Range Linearity
Frequency Change Polarity
VC_U
VC_L
VC_z
V_c
Lin
–
Vdd
Vdd
MΩ
kHz
%
Positive Slope
Output Characteristics
Startup and OE Timing
Rev 1.01
Page 3 of 18
www.sitime.com
SiT3342
1 MHz to 220 MHz Ultra-low Jitter, Endura™ Series Differential VCXO
Table 3. Electrical Characteristics – LVPECL Specific
Parameter
Current Consumption
OE Disable Supply Current
Output Disable Leakage Current
Maximum Output Current
Output High Voltage
Output Low Voltage
Output Differential Voltage Swing
Rise/Fall Time
RMS Period Jitter
[4]
RMS Phase Jitter (random)
Symbol
Idd
I_OE
I_leak
I_driver
VOH
VOL
V_Swing
Tr, Tf
T_jitt
T_phj
Min.
–
–
–
–
Vdd-1.15
Vdd-2.0
1.2
–
–
–
Typ.
78
53
0.15
–
–
–
1.6
225
1.0
0.225
Max.
92
61
–
33
Vdd-0.7
Vdd-1.5
2.0
290
1.6
0.270
Unit
mA
mA
A
mA
V
V
V
ps
ps
ps
Condition
Excluding Load Termination Current, Vdd = 3.3 V or 2.5 V
OE = Low
OE = Low
Maximum average current drawn from OUT+ or OUT-
See
Figure 5
See
Figure 5
See
Figure 6
20% to 80%, see
Figure 6
f = 100, 156.25 or 212.5 MHz, Vdd = 3.3 V or 2.5 V
f = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz, all
Vdd levels, includes spurs, pull range =
±100
ppm. Temperature
ranges -20 to 70°C and -40 to 85°C
f = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz, all
Vdd levels, includes spurs, pull range =
±100
ppm. Temperature
ranges -40 to 95°C and -40 to 105°C
f = 156.25 MHz, IEEE802.3-2005 10 GbE jitter mask integration
bandwidth = 1.875 MHz to 20 MHz, includes spurs, all Vdd
levels
f = 100, 156.25 or 212.5 MHz, Vdd = 3.3 V or 2.5 V
f = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz, all
Vdd levels, includes spurs, pull range =
±100
ppm. Temperature
ranges -20 to 70°C and -40 to 85°C
f = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz, all
Vdd levels, includes spurs, pull range =
±100
ppm. Temperature
ranges -40 to 95°C and -40 to 105°C
f = 156.25 MHz, IEEE802.3-2005 10 GbE jitter mask integration
bandwidth = 1.875 MHz to 20 MHz, includes spurs, all Vdd
To give back to forum members, TI E2E Chinese Support Forum provides 15 sets of TMDSCNCD280025C + TMDSHSECDOCK kits worth $ 128 for forum members to evaluate.
Successful members are required to share ...
The microcontroller is a programmable device. When using it, you need to write a program that meets your needs. After the initialization of each port and configuration is completed, its C language pro...
[i=s]This post was last edited by sipower on 2022-1-22 20:51[/i]The first test at the beginning of 2022 starts with the NodeMCU-BU01 UWB indoor positioning module of Anxinke . There are a lot of infor...
The "redundant design" of the PLC control system is mainly used in two aspects: one is the "redundant design" of the control circuit, such as the emergency disconnection circuit, etc.; the other is...[Details]
Green power management IC-ME8108 is a high-performance chip using pulse frequency modulation (PFM) technology. This chip is a low-power AC/DC switching power supply controller designed specifically...[Details]
This article takes the AT89C51 system with a
6MHz clock
as an example to illustrate the application of clock interrupts:
Timer initial value and interrupt cycle The clock interru...[Details]
In 2021, Intel will leverage its unique advantages in software, chips and platforms, processes and packaging, and large-scale global manufacturers to promote heterogeneous computing and drive the dig...[Details]
Characteristics of DC motor speed regulator voltage regulation:
The artificial characteristic of voltage reduction is a straight line parallel to the inherent characteristic, and there is...[Details]
The non-contact displacement sensor is a revolutionary improvement on the displacement sensor based on potential technology. Compared with the complex applications in the past, the displacement sensor...[Details]
PIC is the prefix of the microcontroller series product model produced by Microchip Corporation of the United States. PIC microcontroller (Peripheral Interface Controller) is an integrated circuit (I...[Details]
The clock control logic in the S3C2440A can generate the necessary clock signals, including the FCLK of the CPU, the HCLK of the AHB bus peripherals, and the PCLK of the APB bus peripherals. The ...[Details]
It plays an important role in serving the country's major needs, leading the development of the national economy and ensuring national defense security, and is known as the "pearl on the top of...[Details]
At the 2021 World Semiconductor Conference, Mao Junfa, academician of the Chinese Academy of Sciences, member of the Standing Committee of the Party Committee and Vice President of Shanghai Jiao Tong...[Details]
If you need to power handheld terminals, portable devices, and stationary equipment that are miles away from an outlet, is there a better solution than batteries?
The answer to this question alw...[Details]
1. Immunolabeling and its classification
1. Fluorescence immunoassay
The principle is to use a sandwich method of a pair of monoclonal antibodies. The substrate is 4-methylumbelliferyl phosp...[Details]
It is common to measure current signals with a fixed bias voltage. Related applications include: carbon monoxide (CO) concentration meters, blood glucose meters, etc. This type of application is wi...[Details]
On June 1, Hyundai Motor Group's first overseas hydrogen fuel cell system R&D, production and sales base "HTWO Guangzhou" was officially completed in Huangpu District, Guangzhou City, Guangdong Provi...[Details]
According to Jiwei.com, on February 5, SMIC said in its fourth quarter 2020 conference call that it had long foreseen the shortage of automotive chips, and the impact was not particularly large and w...[Details]
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
