Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300 Series, Radial, Conformally Coated,
C0G Dielectric, 25 – 250 VDC (Automotive Grade)
Overview
KEMET’s Goldmax conformally coated radial leaded
ceramic capacitors in C0G dielectric feature a 125°C
maximum operating temperature. The Electronics
Industries Alliance (EIA) characterizes C0G dielectric as a
Class I "stable" material. Components of this classification
are temperature compensating and are suited for resonant
circuit applications or those where Q and stability of
capacitance characteristics are required. C0G exhibits no
change in capacitance with respect to time and voltage and
boasts a negligible change in capacitance with reference
to ambient temperature. Capacitance change is limited to
±30ppm/°C from −55°C to +125°C.
These devices meets the flame test requirements outlined
in UL Standard 94V–0 and the demanding Automotive
Electronics Council's AEC–Q200 qualification requirements.
Benefits
• Radial leaded form factor
• Conformally coated
• Encapsulation meets flammability standard UL 94V–0
• 0.100", 0.200" and 0.250" lead spacing
• Operating temperature range of −55°C to +125°C
• Lead (Pb)-free, RoHS and REACH compliant
• DC voltage ratings of 25 V, 50 V, 100 V, 200 V and 250 V
• Capacitance offerings ranging from 1.0 pF up to 0.22 μF
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
C
Ceramic
320
Style/Size
315
316
317
318
320
321
322
323
324
325
326
327
328
330
331
333
335
336
C
Specification/
Series
C=
Standard
153
Capacitance
Code (pF)
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
J
5
G
5
Design
5=
Multilayer
T
Lead
Finish
2
T=
100%
Matte Sn
A
Failure
Rate
A=
N/A
9170
Packaging/Grade
(C-Spec)
Automotive Grade
See
"Packaging
C-Spec
Ordering
Options Table"
Capacitance
Voltage
Dielectric
Tolerance
1
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
3 = 25
5 = 50
1 = 100
2 = 200
A = 250
G=
C0G
1
Additional capacitance Tolerance offerings may be available. Contact KEMET for details.
For Overmolding applications please contact your KEMET representative.
One world. One KEMET
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1052_GOLDMAX_C0G_AUTO • 10/25/2019
1
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300 Series, Radial, Conformally Coated, C0G Dielectric, 25 – 250 VDC (Automotive Grade)
Benefits cont.
• Available capacitance Tolerances of ±0.5 pF, ±1%, ±2%,
±5%, and ±10%
• Extremely low ESR and ESL
• High thermal stability
• High ripple current capability
• No capacitance change with respect to applied rated DC
voltage
• Negligible capacitance change with respect to temperature
from −55°C to +125°C
• No capacitance decay with time
• Non-polar device, minimizing installation concerns
• 100% pure matte tin-plated lead finish allowing for
excellent solderability
• Automotive (AEC–Q200) grade
Applications
Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling,
bypass, filtering, transient voltage suppression, blocking and energy storage.
Application Notes
These devices are not recommended for use in overmold applications and/or processes.
Packaging C-Spec Ordering Options Table
Packaging Type
1
Bulk Bag Automotive Grade
12" Tape & Reel (16.0 ±0.5 mm lead length)
12" Tape & Reel (18.0 mm minimum lead length)
Ammo Pack (16.0 ±0.5 mm lead length)
Ammo Pack (18.0 mm minimum lead length)
1
1
Packaging/Grade
Ordering Code (C-Spec)
9170
9170 (7301)
9170 (7303) and 9170 TR
9170 (7305)
9170 (7317)
Default packaging is "Bulk Bag" with ordering code 9170 for Automotive Grade. Bulk bag option is required for Size/Style C321 &C331.
"Tape and Reel" packaging option is not available for Size/Style C321 and C331. For more information see "Packaging Quantities".
1
"Ammo Pack" packaging option is not available for Size/Style C321 and C331. For more information see "Packaging Quantities".
1
"Ammo Pack" and "Tape and Reel" packaging options have the same lead tape configuration. For more information see "Tape & Reel Packaging
Information".
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1052_GOLDMAX_C0G_AUTO • 10/25/2019
2
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300 Series, Radial, Conformally Coated, C0G Dielectric, 25 – 250 VDC (Automotive Grade)
Dimensions – Inches (Millimeters)
Shoulder Bend (Short)
L
C317
C330*
C321
C317
C331*
C322
C321
C340*
C330*
C322
C350
C331*
Seating Plane
T
Shoulder Bend (Tall)
L
C318
C323
C328
T
L
Inside Kink
T
L
Straight
T
H
C333
H
H
C340:
0.10 max
(2.54 mm)
C315
C320
C330*
C331*
C340*
H
LL
F
S
Seating Plane
F
S
LL
Seating Plane
All Others:
0.06 max
(1.52 mm)
LL
F
S
F
S
LL
L
C316
C316
C326
C326
C327
C327
C336
C336
C346
C356
Outside Kink
T
Snap-In Type 2
L
T
Snap-In Type 1
L
T
C324
H
Seating Plane
H
C325
C335
H
Seating Plane
F
S
E
LL
LL
F
S
E
Seating Plane
F
S
LL
* May be supplied in a “Shoulder Bend” or “Straight” Lead
configuration. Please see Capacitance Range Waterfall section
of this document to determine lead configuration availability by
capacitance value.
Series
C31X
C32X
C31X
Style /
Size
315
316
324
320
326
317
318
321
322
323
325
328
327
330
331
333
335
336
S
Lead Spacing
±0.030 (0.78)
L
Length
Maximum
0.150 (3.81)
0.150 (3.81)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.150 (3.81)
0.150 (3.81)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.280 (7.11)
0.280 (7.11)
0.280 (7.11)
0.280 (7.11)
0.280 (7.11)
H
Height
Maximum
0.120 (3.14)
0.230 (5.08)
0.230 (5.84)
0.230 (5.84)
0.300 (7.62)
0.200 (5.08)
0.235 (5.97)
0.260 (6.60)
0.260 (6.60)
0.300 (7.62)
0.300 (7.62)
0.300 (7.62)
0.320 (8.13)
0.360 (9.14)
0.360 (9.14)
0.400 (10.16)
0.400 (10.16)
0.400 (10.16)
T
Thickness
Maximum
0.100 (2.54)
0.100 (2.54)
0.125 (3.18)
1
0.125 (3.18)
1
0.125 (3.18)
1
0.100 (2.54)
0.100 (2.54)
0.125 (3.18)
1
0.125 (3.18)
1
0.125 (3.18)
1
0.125 (3.18)
1
0.125 (3.18)
1
0.125 (3.18)
1
0.160 (4.07)
0.160 (4.07)
0.160 (4.07)
0.160 (4.07)
0.160 (4.07)
F
Lead Diameter
+0.004 (0.10),
−0.001 (0.025)
LL
Lead Length
Minimum
0.276 (7.00)
0.200 (5.08)
0.276 (7.00)
0.276 (7.00)
0.200 (5.08)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.200 (5.08)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.200 (5.08)
0.100 (2.54)
0.200 (5.08)
0.250 (6.35)
0.020 (0.51)
C32X
0.200 (5.08)
0.250 (6.35)
0.200 (5.08)
C33X
1
Thickness maximum (T) = 0.160" (4.07 mm) for capacitance values greater than or equal to 4.7 µF
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1052_GOLDMAX_C0G_AUTO • 10/25/2019
3
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300 Series, Radial, Conformally Coated, C0G Dielectric, 25 – 250 VDC (Automotive Grade)
Automotive C-Spec Information
KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. The
details regarding test methods and conditions are referenced in the document AEC–Q200, Stress Test Qualification for
Passive Components. These products are supported by a Product Change Notification (PCN) and Production Part Approval
Process warrant (PPAP).
Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec, “9170.”
This C-Spec was developed in order to better serve small and medium-sized companies that prefer an automotive grade
component, without the requirement to submit a customer Source Controlled Drawing (SCD) or specification for review by a
KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMET’s OEM Automotive customers and are
not granted the same “privileges” as other automotive C-Specs. Customer PCN approval and PPAP request levels are limited
(see details below).
Product Change Notification (PCN)
The KEMET Product Change Notification system is used to communicate primarily the following types of changes:
• Product/process changes that affect product form, fit, function, and/or reliability
• Changes in manufacturing site
• Product obsolescence
KEMET Automotive
C-Spec
KEMET assigned
1
9170
1
Customer Notification due to:
Process/Product change
Yes (with approval and sign off)
Yes (without approval)
Obsolescence*
Yes
Yes
Days prior to
implementation
180 days Minimum
90 days Minimum
KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.
Production Part Approval Process (PPAP)
The purpose of the Production Part Approval Process is:
• To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts.
• To provide the evidence that all customer engineering design record and specification requirements are properly
understood and fulfilled by the manufacturing organization.
• To demonstrate that the established manufacturing process has the potential to produce the part
KEMET Automotive
C-Spec
KEMET assigned
1
9170
1
PPAP (Product Part Approval Process) Level
1
●
2
●
3
●
○
4
●
5
●
KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.
● Part Number specific PPAP available
○
Product family PPAP only
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1052_GOLDMAX_C0G_AUTO • 10/25/2019
4
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300 Series, Radial, Conformally Coated, C0G Dielectric, 25 – 250 VDC (Automotive Grade)
Qualification/Certification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
website at www.aecouncil.com.
Environmental Compliance
Lead (Pb)-free, REACH and RoHS compliant without exemptions when ordered with a 100% tin (Sn) wire lead finish.
Series
300 (C3XX)
1
Termination
Finish
(Wire Lead)
100% Matte Sn
RoHS
Compliant
Yes
RoHS
Exemption
Code
n/a
REACH
Compliant
1
Yes
Halogen
Free
Yes
REACH compliance indicates product does not contain Substance/s of Very High Concern (SVHC)
Electrical Parameters/Characteristics
Item
Operating Temperature Range
Capacitance Change with Reference to
+25°C and 0 VDC Applied (TCC)
Aging Rate (Maximum % Cap Loss/Decade Hour)
Dielectric Withstanding Voltage
Dissipation Factor (DF) Maximum Limit at 25°C
Insulation Resistance (IR) Limit at 25°C
−55°C to +125°C
±30 ppm/°C
0%
250% of rated voltage
(5±1 second and charge/discharge not exceeding 50 mA)
0.1%
1,000 megohm microfarads or 100 GΩ
(Rated voltage applied for 120±5 seconds at 25°C)
Parameters/Characteristics
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 V
rms
±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50 Hz and 1.0 V
rms
±0.2 V if capacitance > 1,000 pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known
as Automatic Level Control (ALC). The ALC feature should be switched to "ON."
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1052_GOLDMAX_C0G_AUTO • 10/25/2019
5
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
