HIGH RELIABILITY “SR” CAPACITORS
For applications that require the highest level of reliability, Presidio recommends its high reliability
“SR”
capacitors. Tested
similarly to MIL-PRF-123 Group A, Presidio manufacturers these chips on the same manufacturing line as its military product
line. They may be used in both military and space applications. Please note these capacitors are NOT MIL-qualified.
(TESTED SIMILARLY TO MIL-PRF-123-GROUP A)
QUALITY ASSURANCE PROVISIONS
Every lot undergoes the following inspection and tests:
a) Destructive Physical Analysis (DPA) —
A representative
sample is pulled from each lot and examined per relevant
sections of EIA 469 and to verify adherence to Presidio’s
internal design criteria. Sample size is per
MIL-PRF-123.
b) Ultrasonic Scanning (optional) —
This screening may
be performed on lots to assure the highest quality
microstructure. Ultrasonic scanning is not required for
each lot, and must be specified on the customer purchase
order.
j) Percent Defective Allowed (PDA) —
The cumulative
PDA after voltage conditioning is 5%. Pieces rejected as out
of tolerance for capacitance or visual screening will be
removed from the lot but not counted in the PDA calculation.
k) Visual —
Performed on pieces in accordance with
MIL-PRF-123 Appendix B.
l) Mechanical —
Level 1 AQL 1% in accordance with
MIL-PRF-123.
c) Thermal Shock —
All parts are temperature cycled for 20
cycles in accordance with MIL-PRF-123.
d) Voltage Conditioning —
All parts receive a voltage
conditioning at 2X rated voltage and 125°C for a minimum
of 168 hours and a maximum of 264 hours. Voltage
conditioning may be terminated at any time between 168
and 264 hour time intervals when failures are less than .1%
or 1 piece, during the last 48 hours of the test. Tested in
accordance with MIL-PRF-123 except resistors are used in
place of fuses.
e) Insulation Resistance (IR @ 125°C) —
All parts are
tested at 125°C and rated voltage in accordance with
Method 302 of MIL-STD-202. The minimum IR required is
10,000 megohms or 100 megohm-microfarads.
f) Dielectric Withstanding Voltage (DWV) —
All parts are
tested at 2.5X rated voltage in accordance with Method
301 of MIL-STD-202, or according to EIA/MIL Standards.
m) Class K Element Evaluation (optional) —
A MIL-PRF-
38534 Appendix C Passive Element Class K element
evaluation is available when the customer requires this
testing. Element evaluation is not required on each lot,
and must be specified on the purchase order.
n) Operating Temperature Range:
–55°C to +125°C
STANDARD PACKAGING
Product will be packaged in individual waffle trays or tape
and reel as specified by customer.
DATA PACKAGE
Data will be sent with each shipment including:
a) Destructive Physical Analysis Report (optional) —
Destructive Physical Analysis (DPA) report and photographs
for each lot will be sent. Extra charge may apply.
b) Certificate of Compliance —
Certificate of Compliance
and attributes test data sheet will be sent with each
shipment.
c) Class K Element Evaluation —
If a Class K element
evaluation is required, all variables test data for
subgroup 3 tests will be included in the data package.
d) Ultrasonic Scanning Report (optional) —
An
ultrasonic scanning report will be sent, including a
typical scan. Extra charge may apply.
i) Dissipation Factor (DF) —
See following table:
Voltage Rating
16/25
> 50
50
.15%
.15%
.15%
NPO
3.5%
2.5%
2.5%
BX
h) Capacitance —
All parts are tested at 25°C and
1VACRMS in accordance with Method 305 of
MIL-STD-202.
g) Insulation Resistance (IR @ 25°C) —
All parts are tested
at 25°C and rated voltage in accordance with Method 302
of MIL-STD-202. The minimum IR required is 100,000
megohms or 1,000 megohm-microfarads.
EXAMPLE PART NUMBER
SR
0805BX103K2P5
5.0%
3.5%
2.5%
X7R
Add “SR” to the beginning of the standard
Presidio part number. See Page 3
“HOW TO ORDER A STANDARD PART”
Visit Presidio’s website for additional
technical information on these products.
8
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
HIGH RELIABILITY “SR” CAPACITORS
SIZE
inches (mm)
SR
inches (mm)
L
inches (mm)
W
inches (mm)
THICKNESS
MAX. (T)
METALIZATION
BAND (M.B.)
WVDC
16 V
25 V
50 V
100 V
16 V
25 V
50 V
100 V
16 V
25 V
50 V
100 V
16 V
25 V
50 V
100 V
16 V
25 V
50 V
100 V
16 V
25 V
50 V
100 V
16 V
25 V
50 V
100 V
16 V
25 V
50 V
100 V
16 V
25 V
50 V
100 V
16 V
25 V
50 V
100 V
NPO
68 pF
47 pF
27 pF
18 pF
270 pF
180 pF
120 pF
56 pF
560 pF
330 pF
270 pF
100 pF
470 pF
270 pF
220 pF
68 pF
1500 pF
1000 pF
820 pF
330 pF
5600 pF
3900 pF
2700 pF
1000 pF
0.010 µF
6800 pF
5600 pF
2200 pF
0.018 µF
0.012 µF
0.010 µF
4700 pF
0.047 µF
0.039 µF
0.027 µF
0.010 µF
0.068 µF
0.047 µF
0.033 µF
0.020 µF
0.004 (0.10)
min. band
0.015 (0.38)
min. space
0.004 (0.10)
min. band
0.015 (0.38)
min. space
0.005 (0.13)
min. band
0.015 (0.38)
min. space
0.005 (0.13)
min. band
0.025 (0.64)
min. space
0.020 (0.51)
0.010 (0.25)
0.020 (0.51)
0.010 (0.25)
0.020 (0.51)
0.010 (0.25)
0.020 (0.51)
0.010 (0.25)
0.020 (0.51)
0.010 (0.25)
0.020 (0.51)
0.010 (0.25)
DIELECTRIC
BX
1200 pF
820 pF
560 pF
330 pF
3300 pF
2200 pF
1500 pF
680 pF
6800 pF
5600 pF
3900 pF
1800 pF
4700 pF
3300 pF
2200 pF
1000 pF
0.022 µF
0.018 µF
0.010 µF
5600 PF
0.082 µF
0.056 µF
0.039 µF
0.022 µF
0.22 µF
0.18 µF
0.12 µF
0.047 µF
0.33 µF
0.22 µF
0.18 µF
0.068 µF
0.82 µF
0.56 µF
0.47 µF
0.22 µF
1.2 µF
1.0 µF
0.68 µF
0.33 µF
X7R
3300 pF
2200 pF
1500 pF
680 pF
0.010 µF
6800 pF
5600 pF
1800 pF
0.027 µF
0.018 µF
0.012 µF
3900 pF
0.018 µF
0.012 µF
8200 pF
2200 pF
0.056 µF
0.039 µF
0.027 µF
0.012 µF
0.22 µF
0.15 µF
0.12 µF
0.047 µF
0.47 µF
0.33 µF
0.22 µF
0.10 µF
0.68 µF
0.47 µF
0.39 µF
0.18 µF
1.8 µF
1.2 µF
1.0 µF
0.47 µF
3.3 µF
2.2 µF
1.8 µF
0.68 µF
0.040 (1.02)
0402
0.004 (0.10)
0.040 (1.02)
0403
0.010 (0.25)
0.050 (1.27)
0504
0.010 (0.25)
0.063 (1.60)
0603
0.006 (0.15)
0.080 (2.03)
0805
0.010 (0.25)
0.126 (3.20)
1206
0.008 (0.20)
0.125 (3.18)
1209
0.010 (0.25)
0.175 (4.45)
1712
0.013 (0.33)
0.175 (4.45)
1725
0.013 (0.33)
0.220 (5.59)
2225
0.015 (0.38)
±
±
±
±
±
±
±
±
±
±
0.020 (0.51)
0.004 (0.10)
0.030 (0.76)
0.010 (0.25)
0.040 (1.02)
0.010 (0.25)
0.032 (0.81)
0.006 (0.15)
0.050 (1.27)
0.010 (0.25)
0.063 (1.60)
0.008 (0.20)
0.095 (2.41)
0.010 (0.25)
0.125 (3.18)
0.010 (0.25)
0.250 (6.35)
0.018 (0.46)
0.250 (6.35)
0.018 (0.46)
±
±
±
±
±
±
±
±
±
±
0.024
(0.61)
0.030
(0.76)
0.040
(1.02)
0.035
(0.89)
0.055
(1.40)
±
±
±
±
±
±
0.059
(1.50)
0.065
(1.65)
0.065
(1.65)
0.065
(1.65)
0.080
(2.03)
Note: Above parts are tested similarly to MIL-PRF-123 Group A only.
Presidio has the ability to add Group B for space and flight applications. Call the factory for more information.
EXAMPLE: SR0805BX103K2P5
HOW TO ORDER
SR
Prefix
Size Code
Dielectric Code
Capacitance Code
0805
BX
103
K
2
P
5
Special Code
Marking and Packaging
Termination Code
Tolerance Code
Voltage Code
L
M.B.
T
W
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
9
stm32/stm8
京公网安备 11010802033920号
EEWORLD
