-
1. Characterization of AC voltage AC voltage can be characterized by peak value, average value, effective value, crest factor and form factor. Peak up The peak value is the maximum value that the alt...[Details]
-
Prepare for analysis The size of IRAM is 96k. Actually, the first two programs are run here. The programs are smaller than 16K. What needs to be achieved is to copy the first 16k of IRAM from the s...[Details]
-
There are two purposes for sending pulses:
1) speed control
2) position control
The purpose of speed control is the same as analog quantity, so there is nothing to pay attention to
The pulse...[Details]
-
ROM and RAM both refer to semiconductor memories. ROM is the abbreviation of Read Only Memory, and RAM is the abbreviation of Random Access Memory. ROM can still retain data when the system stops powe...[Details]
-
With the advent of the software-defined car era, the software volume of automotive domain controllers is getting larger and larger. Using traditional diagnostic services for software upgrades will ...[Details]
-
The biggest feature of LED light sources is their long lifespan, which can reach 50,000 to 100,000 hours. It is not practical to monitor their light decay over a long period of time. Therefore, thi...[Details]
-
AND logic and instructions Instruction format: AND destination, source Instruction function: perform a bitwise logical AND operation on two operands, and the result is sent back to the destination op...[Details]
-
#include
//Electric vehicle dual closed-loop program, using dual closed-loop method to control the motor to obtain the best zh speed performance, and can
//limit the maximum current of the motor. T...[Details]
-
The selection structure is equivalent to the conditional statement in text language. The new Diagram Disable Structure in LabVIEW 8 is
Conditional Disabled Structure is similar to the conditional m...[Details]
-
Network analyzers are the main instruments for testing and debugging RF components. With the rapid development of radio communication equipment, the demand for RF devices has also increased dramatica...[Details]
-
1. Servo preparation Servo is a must-learn module for beginners of single-chip mechanical control. Servo is also used for control in some robot joints. Learning and mastering the use of servo is ou...[Details]
-
introduce Many industrial applications, such as semiconductor wafer inspection systems, organic light-emitting diode flat panel display production and inspection, require extremely high motion perfor...[Details]
-
(1) In the AVR device manual, the fuse bit states are defined as programmed (Programmed) and unprogrammed (Unprogrammed). "Unprogrammed" means the fuse state is "1" (disabled); "Programmed" means the...[Details]
-
Original address: http://blog.csdn.net/slj_win/article/details/16906141 The article isn't very well formatted, but it's still well written. The topic of heap and stack has become a monthly topic fo...[Details]
-
Addition and subtraction operations can be performed simultaneously using an operational amplifier with differential inputs. This operational circuit is shown in Figure 5.4-3.
The re...[Details]
Mobile and portable
京公网安备 11010802033920号
EEWORLD