Parallel - Fundamental Quartz Crystal, 3.579545MHz Nom, HC/49US, 2 PIN
ABL2-3.579545MHZ-10-NH5G-Q15-TRAY Parametric
Parameter Name
Attribute value
Is it lead-free?
Lead free
Is it Rohs certified?
conform to
Objectid
1323121894
package instruction
HC/49US, 2 PIN
Reach Compliance Code
compliant
Country Of Origin
Mainland China
YTEOL
6.22
Other features
AT-CUT; TRAY
Ageing
5 PPM/YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
100 µW
frequency stability
0.0015%
frequency tolerance
5 ppm
load capacitance
10 pF
Installation features
THROUGH HOLE MOUNT
Nominal operating frequency
3.579545 MHz
Maximum operating temperature
85 °C
Minimum operating temperature
-30 °C
physical size
L11.5XB5.0XH2.5 (mm)/L0.453XB0.197XH0.098 (inch)
Series resistance
180 Ω
surface mount
NO
ABL2-3.579545MHZ-10-NH5G-Q15-TRAY Preview
HC/49US (AT49) MICROPROCESSOR CRYSTAL
ABL2 Series
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed
and not Moisture Sensitive - MSL = N/A: Not Applicable
Pb
RoHS/RoHS II
11.5 x 5.0 x 2.5 mm
| | | | | | | | | | | | | | |
FEATURES:
• Reduced height at 2.5mm
• High reliability & Low Cost
• Tight stability & extended temperature
• Proven resistance welded metal package
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Minimum
3.579545
3.579545
Operation mode
24.01
24.01
Operating Temperature
Storage Temperature
Frequency Tolerance
Frequency Stability over the Operating
Temperature
(
ref. to +25°C)
Equivalent series resistance
(R1)
Shunt capacitance
(C0)
Load capacitance
(CL)
Drive Level
Aging @
25°C per year
Insulation
Resistance
Drive Level Dependency
(DLD,
Minimum
7 points tested:
from
1µW to
500µW)
0
-55
-50
-50
APPLICATIONS:
• Home electronics
• Computers, modems, and communications
• Automotive and industrial
• High-precision TCXO and clock applications
• Microprocessors
Typical
Maximum
70
24.0
70.00
50.00
+70
+125
+50
+50
See table 1 below
7
18
100
500
±10
25% of
Max
ESR
Max
ESR in
Table 1
1000
±5
ºC
ºC
ppm
ppm
Ω
pF
pF
µW
ppm
MΩ
ppm
Ω
Ω
MHz
Fundamental
AT-
cut
(Standard)
3
rd
OT
AT-cut
(Standard)
Fundamental
AT-
cut or
BT-cut (See
options)
See options
See options
See options
Units
Notes
See options
@
100Vdc
±
15V
Δfrequency
(Max –
Min)
ΔESR
(Max – Min)
Max
ESR over DLD
range
Table 1
Frequency (MHz)
3.579 - 4.999 (Fund.)
5.000
-
5.999
(Fund.)
6.000 -
7.999
(Fund.)
8.000
-
8.999
(Fund.)
9.000
-
9.999
(Fund.)
10.000
-
15.999
(Fund.)
16.000
-
50.000
(Fund.)
24.01
-
31.999
(3rd
O/T)
32.000 -
70.00
(3rd
O/T)
ABRACON IS
ISO 9001 / QS 9000
ISO 9001:2008
CERTIFIED
ESR(Ω) max.
180
120
100
80
60
50
40
100
80
Revised: 01.08.13
30332
Esperanza, Rancho Santa
Margarita,
California 92688
tel 949-546-8000
|
fax
949-546-8001
|
www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
HC/49US (AT49) MICROPROCESSOR CRYSTAL
ABL2 Series
OPTIONS AND PART IDENTIFICATION:
Pb
RoHS/RoHS II
11.5 x 5.0 x 2.5 mm
| | | | | | | | | | | | | | |
ABL2 -
Frequency in MHz
Please specify the frequency
in xx.xxxxMHz.
e.g. 14.3181MHz
Load Capacitance (pF)
Please specify CL
(Minimum 10pF) in pF or
S for series
Custom ESR if other
than standard
R□
□:
Specify a value in
Ω
(e.g.: R40)
MHz-
-
-
-
-
-
Packaging
Blank: Bulk
T: Tape & Reel
TRAY: Tray
Value Added
I
Insulator Tab
L2
Middle 3rd lead
QXX
Trimmed leads
Q15
for 0.15" length
Oscillation Mode
F: Fund. AT>24MHz
FB: Fund. BT>24MHz
Operating Temp.
A: -10°C ~ +60°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J*: -40°C ~ +105°C
K*: -40°C ~ +125°C
L*: -55°C ~ +125°C
Freq. Tolerance
H5: ± 5 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Freq. Stability
U**: ± 10 ppm
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
R: ± 150 ppm
NOTE:
* Frequency stability ±50ppm, ±100ppm, ±150ppm only. Contact ABRACON for tighter frequency stability.
** -10 to +60C only.
ABRACON IS
ISO 9001 / QS 9000
ISO 9001:2008
CERTIFIED
Revised: 01.08.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
HC/49US (AT49) MICROPROCESSOR CRYSTAL
ABL2 Series
OUTLINE DIMENSIONS:
Pb
RoHS/RoHS II
11.5 x 5.0 x 2.5 mm
| | | | | | | | | | | | | | |
ABL2 SERIES HC49/US (AT49)
MICROPROCESSOR CRYSTAL
Date of Issue: Jan. 2
nd
, 2013
Page (8) of (10)
8.0
Packaging:
L
5.5mm Min
20.0 ± 0.5mm
Packaging
Bulk
Tape & Reel
11.5 x 5.0 x 2.5 mm
Abracon Drawing # 450715
Revision #: K
T= Tape and reel (1,000pcs/reel)
Dimensions: inch (mm)
TAPE & REEL:
T= Tape and reel (1,000pcs/reel)
Dimensions: mm
ATTENTION:
Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO 9001 / QS 9000
ISO 9001:2008
CERTIFIED
Revised: 01.08.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
On December 20, the U.S. Department of Justice released details of a large-scale theft case. A Japanese employee of a Sony subsidiary stole $154 million (about 980 million yuan) of public funds and co...
Are more bits better in a microcontroller? That's like asking: Are more cylinders better in an internal combustion engine? Peripherals and other features are important, not just the bits (or cylinders...
Seeing that the EVAL-M3-TS6-665PN development board can work best with the EVAL-M3-102T control board, after receiving the EVAL-M3-TS6-665PN development board, I gritted my teeth and spent more than 6...
Does anyone know any information about CPAFC carrier synchronization, or a video with a detailed explanation? It would be best if there is MATLAB simulation code. I would appreciate your help. Thank y...
[size=5] PWM is a control method that can be applied to many power supply topologies. Power supplies of any topology have a wide range of uses and can be said to be everywhere; the application range o...
Goodbye 2019, hello 2020! In 2019, I found my own direction of struggle. Because of this direction of struggle, I got to know the Electronic Engineering Welfare Club. In the Electronic Engineering Wel...
The digital economy is being expected to be an important support for the high-quality and sustainable development of China's economy. The integration of the energy revolution and the digital revolu...[Details]
The automotive industry is currently undergoing an exciting transformation in connectivity as disruptive technologies emerge, with demands for faster and more powerful computers. Changes, updates and...[Details]
On April 17, Yangjie Technology released its 2019 annual report, stating that the company achieved operating income of 2.007 billion yuan, a year-on-year increase of 8.39%, and net profit attributabl...[Details]
In the large-size LCD panel market, South Korea's Samsung and LG were once the world's largest manufacturers. In recent years, due to the rise of domestic LCD panels and the rapid price reduction of ...[Details]
On April 22, 2022, Maitian Energy Co., Ltd. and Mantian Solar Technology (Shenzhen) Co., Ltd. signed a strategic cooperation agreement and a signing ceremony for the 100 MW photovoltaic industr...[Details]
With the hot sales of iPad launched by Apple in the market, many manufacturers have joined the tablet computer camp. Tablet computers are basically designed with ultra-thin appearance and require l...[Details]
On the morning of March 6, Panji District and China Shipping Energy Storage Technology (Beijing) Co., Ltd. held a signing ceremony for the investment intention of energy storage battery production bas...[Details]
When measuring ultra-low jitter devices and equipment, engineers must always ask the question: Is the measured value from the DUT (device under test) or from the test equipment? Engineers are also ...[Details]
Tetsuro (Terry) Higashi, former CEO of Tokyo Electron and a member of the government's chip industry advisory panel, said Japan must achieve 2nm mass production within a decade. He said Japan shoul...[Details]
Recently, GAC's independently developed "super fast charging battery" based on three-dimensional structured graphene (3DG) material will enter the mass production test stage at the end of this year. ...[Details]
Blister packaging for tablets and capsules is unique in many ways to the packaging industry. Blister packaging is known for its practicality, but it is the unique design of the blister packaging that ...[Details]
The key task of the UPS is to ensure that the power supplied to IT equipment meets the specific power requirements of the equipment under various input AC conditions (including generator operation)...[Details]
At present, the design of module power supplies is becoming more standardized, and the control circuit tends to adopt digital control methods. Non-isolated DC-DC converters (including VRM) are grow...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
