5.0 mm x 3.2 mm Package Pinout ............................................................................................................................................... 1
Ordering Information .................................................................................................................................................................... 2
Device Configurations and Pin-outs ............................................................................................................................................. 9
Pin-out Top Views................................................................................................................................................................. 9
Test Circuit Diagrams for LVCMOS and Clipped Sinewave Outputs ......................................................................................... 10
Frequency Stability ............................................................................................................................................................. 16
Output Frequency and Format............................................................................................................................................ 16
Output Frequency Tuning ................................................................................................................................................... 16
Pin 1 Configuration (OE, VC, or NC) .................................................................................................................................. 17
Control Voltage Bandwidth ................................................................................................................................................. 20
Pull Range and Average Pull Range .................................................................................................................................. 22
Output Frequency ............................................................................................................................................................... 23
2
I C Control Registers .......................................................................................................................................................... 25
Serial Interface Configuration Description .......................................................................................................................... 28
Serial Signal Format ........................................................................................................................................................... 28
Parallel Signal Format ........................................................................................................................................................ 29
Parallel Data Format ........................................................................................................................................................... 29
2
I C Timing Specification ...................................................................................................................................................... 31
2
I C Device Address Modes ................................................................................................................................................. 32
Schematic Example ............................................................................................................................................................ 33
Dimensions and Patterns ........................................................................................................................................................... 34
Additional Information ................................................................................................................................................................ 36
Revision History ......................................................................................................................................................................... 37
Rev 1.05
Page 3 of 38
www.sitime.com
SiT5156
1 MHz to 60 MHz, ±0.5 to ±2.5 ppm, Elite Platform™ Super-TCXO
Electrical Characteristics
All Min and Max limits are specified over temperature and rated operating voltage with 15 pF output load unless otherwise
stated. Typical values are at 25°C and 3.3V Vdd.
Table 1. Output Characteristics
Parameters
Nominal Output Frequency Range
Operating Temperature Range
Symbol
F_nom
T_use
Min.
1
-20
-40
-40
Frequency Stability over
Temperature
Initial Tolerance
Supply Voltage Sensitivity
F_stab
–
–
–
F_init
F_Vdd
–
–
–
–
Output Load Sensitivity
F_load
–
–
–
Frequency vs. Temperature Slope
ΔF/ΔT
–
–
–
Dynamic Frequency Change during
Temperature Ramp
One-Year Aging
20-Year Aging
F_dynamic
–
–
–
F_1y
F_20y
–
–
Typ.
–
–
–
–
–
–
–
–
±7.10
±11.83
±28.40
±0.81
±1.35
±3.24
±15
±25
±60
±0.13
±0.21
±0.50
±1
±2
Max.
60
+70
+85
+105
±0.5
±1.0
±2.5
±1
±16.25
±32.50
±65.0
±2.75
±5.50
±11.00
±25
±50
±100
±0.21
±0.42
±0.83
–
–
Unit
MHz
°C
°C
°C
ppm
ppm
ppm
ppm
ppb
ppb
ppb
ppb
ppb
ppb
ppb/°C
ppb/°C
ppb/°C
ppb/s
ppb/s
ppb/s
ppm
ppm
Initial frequency at 25°C at 48 hours after 2 reflows
Using IBERT IP core to implement GTX transceiver hardware bit error rate test example
Author: Pan WenmingintroductionVivado provides an IBERT tool for board-level hardware testing of high-speed serial...
Author wyyyy
Due to the project requirements, low power consumption is required, and the Bluetooth low power chip CH579 from Qinheng Company was selected . Next, I will briefly introduce my tense and ...
Can someone please help me look at Training 10? What's wrong with the following code? The compilation is fine, but after burning, the key triggering the external interrupt does not produce the require...
Recently, there is a rumor that the material prices of semiconductor manufacturers have begun to fall. Have you noticed it? If it can return to the level of 2019, would you still be willing to use the...
TI's 430 series focuses on low power consumption. Its technical documents and Dome programs are very detailed, especially the technical documents, which really make people feel like worshipping. There...
Today we will explain an important concept of frequency converter: frequency source. Some brands also call it given channel, etc., but they are all the same thing. Previously, as long as a running ...[Details]
The latest report released by market research firm IDC shows that in the first quarter of 2020, shipments in the Japanese mobile phone market (smartphones + feature phones) reached 7.762 million unit...[Details]
According to Japanese media Industrial News Daily on the 26th, the Japanese government hopes that TSMC and Sony will invest 1 trillion yen (about 9.19 billion US dollars) to build Japan's first 20-na...[Details]
Against the backdrop of global energy shortages and increasing environmental protection requirements, countries around the world are vigorously developing green energy-saving lighting. As a revolut...[Details]
1. Select a switching power supply controller The AC220V to DC12V/2A power supply uses the green low-power switching power supply controller TMG0X65. According to its typical output power table, TMG...[Details]
After two years of record sales, North American
robot
orders fell 30% in 2023, according to a new report from the Association for Advancing Automation (A3). The group said it expects the ec...[Details]
There are 5 exception modes and 7 interrupt sources in ARM. Some of these 7 interrupt sources are what we want to happen, but some are what we don't want to happen. The interruptions we want to hap...[Details]
SSA3030 spectrum analyzer is a common type of spectrum analyzer, which has the advantages of high measurement accuracy, good sensitivity and long service life. How much do users know about the use of ...[Details]
1. Development of Logic Analyzer Since the development of microprocessors in the early 1970s, 4-bit and 8-bit buses have appeared, and the dual-channel input of traditional oscilloscopes cannot m...[Details]
1. Normal operation mode
The power supply principle of the uninterruptible power supply system is that when the mains power is normal, the machine will convert the mains AC power into DC power...[Details]
Leading the manufacturing industry towards an intelligent future, Rockwell Automation was invited to attend the 2021 World Artificial Intelligence Conference A comprehensive picture of the future of...[Details]
Most circuits are ground referenced, and lower voltage components can monitor the low side of the load, but not the high side. For example, almost any low voltage rail-to-rail input op amp can sens...[Details]
The "Chengxing Platform" has been successfully mass-produced on more than a dozen models
Shenzhen, China – October 23, 2024 –
BlackBerry today announced that Shenzhen Zhuoyu Technolo...[Details]
You might be tempted to blame the lack of output stability in an analog-to-digital converter or a digital-to-analog converter on the actual converter itself. After all, these devices are complex. Howe...[Details]
In current practical applications, the problems of high-power LEDs are mainly manifested in the following aspects: 1. Insufficient knowledge of LED working conditions and power supply technology has ...[Details]
EE_FPGA Learning Park
京公网安备 11010802033920号
EEWORLD
