COMPONENTS PRODUCT INFORMATION
NEW
Compact Automotive Connectors for PCB-to-Cable Applications CONNECTOR
MB-0175-1
MX34 Series
(for Low Pin Counts)
RoHS Compliant
October 2007
Compact, single row type connectors have been developed to add to the existing line
of MX34 Series connectors for automobiles.
The available pin counts are 3, 5 and 7 positions, available in straight and angle pin
header type. (Straight type is available in 5 and 7 positions)
Hook pins are placed on both sides for easier board attachment. An 8 position,
double row type has also been developed.
Features
•Compact, single row PCB-to-cable connector with 2.2 mm horizontal pitch.
(8 pos. is available in double row, 2.4mm pitch)
•Hook pins are placed on both sides for easier board attachment.
•Socket contact with box-type pin header is durable in external forces; contact is
highly resistant to twisting and equipped with a proven double leaf spring.
(In common with MX34 Series double row type)
• Adoption of a preset-type retainer facilitates easy wire harness operation.
If retainer is not completely inserted in housing, the connector is not engaged,
and incomplete contact insertion is detected.
•Lock spring is equipped with a bridge protecting the contacts from external load.
General Specifications
•No. of contacts: Single row 3, 5, 7 pos.
Double row 8 pos.
•Contact resistance:
5m ohm max. (initial)
•Dielectric withstanding voltage:
AC 1000V (per minute)
•Operating temperature:
-40 Deg. C to +85 Deg. C
1/6
JAE PMK Div. Proprietary. Copyright © 2007,Japan Aviation Electronics Industry, Ltd.
•Rated current: 3A
•Insulation resistance: 100M ohm min
•Durability: 50 times
•Applicable wire:
Please refer to next page
MB-0175-1
Materials and Finishes
•Socket Connector
Components
Socket housing
Retainer
•Pin Connector
Materials and Finishes
PPE+PA66 (ALLOY)
PPE+PA66 (ALLOY)
Components
Pin insulator
Pin contact
Hook pin
•Socket Contact
Materials and Finishes
SPS GF 30
Brass/Sn plating
Copper alloy/Sn plating
Components
Socket contact
Materials and Finishes
Highly conductive material/
Sn plating
Applicable Wire
Part Number
M34S75C4F1
M34S75C4F2
M34S75C4F3
M34S75C4F4
Applicable Wire
2
AVSS0.3mm ,
2
2
CHFUS0.22mm ~0.35mm
2
AVSS0.5mm ,
2
2
CHFUS0.5mm ~0.75mm
2
CAN SD 0.35mm (note1)
2
AVSS0.85mm (note1)
SJ Drawing
SJ038527
SJ038528
SJ038747
SJ038893
Note 1: M34S75CF3 and M34S75CF4 can only be inserted in
double row cavities on both sides, two housing cavities in total.
(8 position type can be inserted in any area.)
Crimp Tool
Part Number
M34S75C4F1
M34S75C4F2
M34S75C4F3, 4
Hand Crimp Tool Semi Automatic Applicator Automatic Applicator
CT150-2-MX34
350-MX34D-2
350-MX34D-3B
CT150-1-MX34
--------
350-MX34C-2
350-MX34C-3B
Withdrawal Tool
ET-MX34-1
2/6
JAE PMK Div. Proprietary. Copyright © 2007,Japan Aviation Electronics Industry, Ltd.