within 5°C of the specified classification temperature (T
C
)
Ramp-down rate (T
p
to T
smax
)
Time 25°C to peak temperature
Reflow cycles
*Tolerance
for peak profile temperature (T
P
) is defined as a supplier minimum and a user maximum.
Sn-Pb Eutectic
Assembly
100°C
150°C
60 - 120 sec.
3°C/sec. max
183°C
60 - 150 sec.
see Table 1
20 sec.
6°C/sec. max
6 min. max
2 max
Pb-Free
Assembly
150°C
200°C
60 - 120 sec.
3°C/sec. max
217°C
60 - 150 sec.
see Table 2
30 sec.
6°C/sec. max
8 min. max
2 max
**Tolerance
for time at peak profile temperature (t
p
) is defined as supplier minimum and a user maximum.
ATTENTION:
Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products
are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life
and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact
The official website says that it can be replaced by p2p, but I can't find the pin information in the datasheet. Now I want to replace the stm32f103cbt6. Does anyone have this information and can shar...
It is understood that China Mobile released a poster on the 16th, warming up the application of super SIM cards in the 5G era.
On November 19, China News Network reported that China Mobile released a ...
To help avoid common implementation errors when attempting to use I2C to communicate between a peripheral IC and an MSP, it is worth looking at some of the following suggestions:Start with the example...
Systems requiring advanced video graphics capabilities have always been a challenge to implement. Traditionally, these systems have required a complex combination of hardware features and software fun...
The previous article introduced the construction of the hardware circuit and conducted a simple test to confirm that there were no problems with the hardware welding. This article mainly introduces th...